i-MO Go User manual

QUICK
SET UP GUIDE
Mobile WiFi Router

1. Schematic Diagram of Router:
Indicator Description
ID appearance
Interface Specification
ITEM
INTRODUCTION
indicator
2
1
Power buon
long press (3 seconds) to start on / off
the device
Sleep mode short press (less than 2
seconds) to exit Sleep
Equipment work properly, and the LCD
screen backlight is turned on, Display
SSID number andWIFI password short
press (less than 2 seconds)
3WPS buon
short press (3 seconds) to open the WPS
mode
4
USB interface
Connect the USB cable to power adapter or
PC/Laptop
3
Baery indicator
Network Mode indicator
WiFi indicator
SMS indicator

(U)SIM card installation instruction
Open the back cover, remove the baery.
Insert (U)SIM card into the slot.
Reset button
short press (less than 1 seconds) equipment to restart
long press (more than 2 seconds) to restore the factory settings

2. Operating environment :
Item Descripon
OS
Windows Windows XP 64bit\32bit(SP3),Vista 64bit\32bit(SP2),7,8,10
Mac
OS X10.6 and Later
Browser
Internet
Explorer Internet Explorer 9.0 or higher
Safari
Safari 4.0 or higher
3. Indicator Specification:
Status Information
Category Icon
Display
Baery indicator
Green light: the battery is fully charged.
Green slow flash: the battery is charging.
Red long light: ultra low voltage battery, may be automatically
shut down.
Put out: sleep, shut down.
Network Mode indicator
Green long light: 4G network
Blue long light: 3G or 2G network
Red long light: smart card failure, or PIN code verificaon
failure, or no signal.
Put out: shutdown, standby, sleep.
WiFi indicator
Green long light: WIFI working.
Green flash: WPS secure connecon is being built.
Green slow flash five seconds: WPS secure connecon
successfully established.
Put out: WIFI off, shut down.
SMS indicator
Green slow flash: box is full
Green long light: new sms.
Put out: sleep, shut down.
4. Activate Client:
Open the browser, and then enter the IP address hp://192.168.1.1 device interface will open
in your browser.
Client default username / password: admin

5. Interface Introduction:
Client Home page information is divided into two parts:
1. Status information display and advanced settings area.
2. Informaon Tips Quick Setup area.
Icons and functions defined:
Status informaon display and advanced sengs area.
Icon Explanation
CONNECTION
SETTINGS
ABOUT
WiFi Config
STATUS
ADMIN
DISK
APN

Status Information Description
Network signal
Signal display
Connecon Status Connected
Connected
Connected
Unconnected
Roaming Roaming On
Baery Baery power display
Connect the device power adapter or PC using a USB
connecon
Informaon Tips Quick Setup area
No. Explanation
1 Home
2Language sengs
3Logout
4 Network connecon status
5 Baery status
6SSID
7 SMS status
8 WIFI users
9 Roaming
4G
3G
2G

6. Safety Prcautions:
Read the safety precauons carefully to ensure the correct and safe use of your wireless device.
Do not switch on your device when the device use is prohibited or when
the device use may cause interference or danger.
Follow the rules or regulaons in hospitals and health care facilies.
Switch offyour device near medical apparatus.
Switch offyour device in an aircra. The device may cause interference
to control signals of the aircra.
Switch offyour device near high-precision electronic devices. The device
may affect the performance of these devices.
Do not aempt to disassemble your device or its accessories. Only
qualified personnel are allowed to service or repair the device.
Do not place your device or its accessories in containers with strong
electromagnec field.
Do not place magnec storage media near your device. Radiaon from
the device may erase the informaon stored on them.
Do not put your device in a high-temperature place or use it in a place
with flammable gas such as a gas staon.
Keep your device and its accessories away from children. Do not allow
children to use your device without guidance.
Use approved baeries and chargers only to avoid explosion.
Observe the laws or regulaons on device use. Respect others’ privacy
and legal rights when using your device.
Recommend that you use the equipment in this environment:
Temperature: 0℃to 35℃ . Humidity: 5% to 95%.
Recommend that you save the environment:
Temperature: -10 ℃to 45℃. Humidity: 5% to 95%.