4/ 6
Move the Power ON/OFF Switch on the unit to the ON position (right). The first time the unit is
turned on it will enter auto pairing mode, indicated by a rapidly flashing blue light. “isb-5001”
should appear on your device’s menu. If “Not Paired”, “Not Connected” or similar message
appears, tap on “iSB-5001“ to complete pairing.
Once paired with a device, the blue light will glow steadily. There should be an indication on your
device that pairing is complete (”Connected” or similar). On some devices, you must then select
“Use as Audio Device” or similar on the device’s Bluetooth menu. Once paired, your device
should auto-link to the iSB-5001 whenever within range (about 30 feet). If auto pairing did not
work, press and hold the Bluetooth Pairing Button located on the back of the unit for 2 seconds
to retry pairing.
Once the Unit Has Paired with A Device (auto linking):
When the unit has been paired with a device, the next time it is powered on, the unit will turn on
in auto link mode and attempt to auto link to a previously paired device, indicated by a slowly
flashing blue light. If a linked device is found, the indicator will glow solid blue.
If no linked device is found, the blue light will continue to flash slowly. Press and hold the
Bluetooth Pairing Button located on the back of the unit for 2 seconds. The unit will enter pairing
mode, 2 short beeps will sound and the light will flash blue rapidly while the unit attempts to
pair.
Playing Audio Via Bluetooth
Move the Power ON/OFF Switch to the ON position (right) to listen to audio streamed wirelessly
from your paired iPad, iPhone, iPod or other Bluetooth device. The blue light will flash as the unit
searches for a previously paired device, and then turn solid blue once a previously paired device
is detected.
Use the controls on your device to play or pause audio, navigate tracks and control volume from
your Bluetooth device.
When done listening, move the Power ON/OFF Switch to the OFF position (left) to turn the unit
off.
NOTE: Aux-in audio is disabled when Bluetooth audio is playing from a different device.
Playing Audio via Aux In
Connect the included 3.5 mm audio plug to the headphone or line-out jack on your audio device
and the other end into the Aux-in Jack on the back of the unit.
Move the Power ON/OFF Switch to the ON position (right) to listen to audio via aux in. The
indicator light will flash blue.
Power on the audio device and use the controls on the device to play or pause audio, navigate
tracks and control volume. If your audio device is already paired with the unit, the light will glow
steadily blue as in Bluetooth mode, but you will hear your audio via aux-in.
When done listening, move the Power ON/OFF Switch to the OFF position (left) to turn the unit
off. Remember to turn off your audio device, too.
Playing Audio via Aux Out
You can connect the unit to an external speaker via the Aux-out jack located on the back of the
unit to expand the audio playing in Bluetooth or Aux-In modes.
Connect a 3.5 mm audio cable plug to the Aux- out jack on back of the unit and connect the
other end to the line-in jack on your external speaker.
Move the Power ON/OFF Switch to the ON position (right).
Power on a Bluetooth or aux-in audio device and use the controls on the device to play or pause
audio, navigate tracks and control volume.
