Setting up Your Bluetooth GPS
The instruction is provided as a general guideline. The steps may be different on your particular
device. Please refer to user manual of each device for more detailed information.
Pocket PC
* Make sure Bluetooth is enabled on the Pocket PC.
1. Open Bluetooth Manager by clicking on Bluetooth Manager icon.
2. Select New -> Connect! to start Connection Wizard.
3. Highlight Explore a Bluetooth device and click Next.
4. Select Tap here to choose a device and click Next.
5. Bluetooth wizard will search and display available Bluetooth devices on screen.
6. Click on BT GPS icon and available service will display.
7. Enter 0000 as passkey.
8. Select SPP Slave and click Next.
9. Select Finish and BT GPS will now available as short cut.
Palm OS
1. Click on Bluetooth icon to start Bluetooth Manager.
2. Make sure Bluetooth is selected to On.
3. Click on Setup Devices and then click on Trusted Devices.
4. Click on Add Devices to search for available devices.
5. Click on Bluetooth GPS and enter 0000 as passkey.
Windows
1. From Desktop, click on My Bluetooth Places icon to open Bluetooth Manager.
2. Click on Search for devices in range to search all available Bluetooth devices.
3. Enter 0000 as passkey and BT GPS icon should be displayed.
4. Right click and select Connect SPP Slave.
5. The Bluetooth connection will be established and BT GPS icon will become green.
MAC OS X
1. Go to System Preferences and click on the Bluetooth icon.
2. Click on settings to ensure BT is turned on and discoverable.
3. Select the Devices tab.
4. Click on set up new device.
5. This brings up the Bluetooth Set Up Assistant
6. Follow the instructions on the set up assistant and enter 0000 as passkey.
7. The device should be listed in the devices window.
8. Locate the BT serial utility application in the utilities folder, double click to open
9. Click on new
10. Assign the port a name, select outgoing, click on select device.
11. Select the Bluetooth GPS and highlight SPP slave in the right hand window.
12. Click select button and select the port type RS-232.
13. Click OK to finish setup.
