ICODIS CB-100W User manual

iCODIS
Pico Mobile Projector
CB-100W
User guide

-1-
1. Brief introduction of CB-100W
2. Screen focus/brightness
3.Connect a projector to Wi-Fi
4.Screen mirroring
4.1 AirPlay -iPhone
Option 1
Option 2
Option 3
4.3 Miracast Android smart phone
Example: Samsung S6
5.Software update
6.Battery charging
Specifications
Precautions
4.2 Windows Miracast-Windows 10
4.2 Windows Miracast-Windows 8
AirPlay connect Apple computers
Catalog
3
3
4
4
4
7
10
15
18
22
25
28
28
29
29
24

Back button OK button Power button
Lens
Vent
Reset
Speaker
Focus wheel
SD card slot
Speaker
Vent Charger connector
Vent
Ear jack
Charging
Notification
LED
Due to the high temperature of vent area,do not get close to the vent area.
Do not touch the lens when using the projector. The lens may be damaged.
-2-

Power button
Focus ring
1. Brief introduction of CB-100W
1. Turning the projector On:
Press power button 2 seconds
2. Turning the projector Off:
Press power button 2 seconds
2. Screen focus/brightness
1.Focusing of the screen:
When an image appears on the
screen, check if it is in focus and fits
the screen properly.
To adjust the focus of the image,
rotate the focus wheel.
2.Brightness of screen: Setting-Brightness Setting
Return
Enter
-3-

3.Connect a projector to Wi-Fi
1.Go to Settings.
2.Select Wi-Fi Setting.
3.Select Wi-Fi SSID on the list.
4.Enter the password.
4.Screen mirroring
4.1 AirPlay -iPhone
Option 1: Connect CB-100W to Wi-Fi, after that
Connect iPhone to CB-100W
Click Settings Click Wi-Fi Setting
-4-

Choose your Wi-Fi (home Wi-Fi)
Return to Main page and click Apple
Enter password
Wait 5 seconds and CB-100W is online
-5-

Click Settings on your iPhone Open WLAN
Choose Wi-Fi: iCODIS-CB100W-xxxxxx
-6-

Drag up your iPhone
and click AirPlay
Click iCODIS-CB100W-xxxx
and open Mirroring
4.1 AirPlay -iPhone
Option 2: Connect CB-100W and your iPhone to the same Wi-Fi.
Click Settings Click Wi-Fi Setting
-7-

Choose your Wi-Fi (home Wi-Fi)
Return to Main page and click Apple
Enter password
Wait 5 seconds and CB-100W is online
-7-
-8-

Click Settings on your iPhone Open WLAN
Choose Wi-Fi: Please notice that CB-100W
and your iPhone are under the same Wi-Fi.
-8-
-9-

4.1 AirPlay -iPhone
Option 3: Connect CB-100W to iPhone’s hotspot
(When you go outside and there is no Wi-Fi)
-9-
-10-
Drag up your iPhone
and click AirPlay
Click iCODIS-CB100W-xxxx
and open Mirroring

Sometimes devices
can not find the hotspot
from the iPhone,
you can reset the Network
Settings on your iPhone,
then it works.
-10-
-11-

Click Settings
-11-
-12-
Click Personal Hotspot
Open Personal Hotspot

Click Settings on CB-100W and connect Wi-Fi to your iPhone’s hotspot
Return to main page and click Apple,
-12-
-13-
Wait 10 seconds and CB-100W will connect the hotspot automaticly.

Drag up your iPhone
and click AirPlay
-13-
-14-
Click iCODIS-CB100W-xxxx
and open Mirroring

Click Apple
on the CB-100W
AirPlay connect Apple computers
-14-
-15-

Click “preferences” at the lower right corner of windows table
Click “AirPlay monitor”, it displays Airreceiver (CB-100W), click connect
-15-
-16-

After connected, one more blue“AirPlay” icon will be in taskbar of computer
To disconnect, click AirPlay icon at the upper right corner, choose
“disconnect AirPlay screen”
-17-

4.2 Windows Miracast-Windows 10
Click Windows
on the CB-100W
-18-

Click action center
-18-
-19-