ICODIS CB400 User manual

111
123
4
4567
89
10 11 12
1.Projector Overview~1 1.Projector Overview~2
1. Height bracket 2. Air intake holes 3. Screw Mount (M5)
4. Battery ventilation holes 5. Ventilation holes 6. Focusing knob
Kind reminder: Please ensure that you are using the correct cable for the VGA/AV port!
(For more details please inquire with your distributor) . Kind reminder: It’s strictly prohibited to block the air intake window,
which may cause over heating and damage the projector.
1
12
3
4
5
6
1. Projection lens
2. Front IR remote
controlling sensor
3. Ventilation holes
4. Power on/off
5. USB 3.0 ports
6. TF card reader
7. 3.5mm earphone ring
8. Adapter connection port
9. U disk/mouse port
10. HDMI input port
11. Computer/video port
12. Switch botton

2. Specifications
1.Power
2.Arrow keys
3.Menu
4.Volume
5.Vol -
6.Homepage
7.Mute
8.Enter
9.3D conversion
10.Aspect
11.Vol +
12.Exit
Optical
parameters
Projection
parameters
System
parameters
Physical
interface
Display chip:0.3'' DMD RGB-LED
Brightness uniformity:98%
Contrast ratio:1000:1
Resolution:
1280*800
Projection size:20-200 inch
Focus mode: manual focus
Battery time:about 120 minutes
Power adapter:DC19V/3.42A
Power:32W
Size: 175*145*31mm
CPU: Mstar-6A628VX quad core1.5GHZ
RAM:1GB DDR3
Operation system: based on Android 4.4
Bluetooth: support bluetooth 4.0
TF: 32GB(Max)
DC power jack x 1
USB 3.0 x 1
TF card reader x1
3.5mm earphone jack x 1
Brightness:3000 lumens(international standard 500Ansi Lumens)
Battery capacity: 10,000 mAh
Speaker:2W*2
N.W.:600g
GPU:Mali-450MP2
ROM: 8GB eMMC
USB 2.0 x 1
HDMI x 1
VGA/AV x 1
IR: IR remote control
Smart phone pusher: Airplay, Miracast etc.
Battery: Low battery warning; overcharge warning
Throw ratio: 1.47:1
Lens: High light transmittance coating glasses
Keystone: Electronical adjusting 50
Offset:100%
WiFi: 802.11ac WiFi, 2.4G/5G
NTSC: ≥120%
3D display: Yes
Battery: Li-ion style
3.Remote Control
1
2
3
4
5
6
7
8
9
10
11
12

1.ON: Plug the DC terminal of the power adaptor to DC-IN terminal of projector, adjust the
master switch on the right to “ON”, while the red light indicator light is on, press the power key.
2.OFF: Press the power key while the projector is working normally, if the indicator
light turns from green to red, the projector is off.
5.How to Focus?
4.Power ON/OFF
5.How to Focus?
Switch on
Switch off
Adjust the focus button up or down lightly until the image is clear.
Adjust the focus button up or down
lightly until the image is clear.
150 inch
120 inch
100 inch
80 inch
60 inch

6.How to use the USB2.0/3.0 interface? 7.How to connect WiFi?
Connect your mouse and keyboard via the USB 2.0/3.0 ports. Read your audio, video,
and photos directly through USB. Install your favourite APK’s via USB.
Supporting Format
Picture Format
Audio Format
Video Format
MP3/WMA/MP2/OGG/AAC/M4A/DTS etc
JPG/JPEG/GIF/BMP/PNG etc
MP4/AVI/MOV/FLV/VOB/3GP/MPG/RMVB/WMV etc
Connect mouse/keyboard/USB stick
WiFi connection steps:
Please press the main interface on the remote controller until the main screen appears,
Please press “System Setting”, to find the “Wi-Fi Setting” and select wireless network you
wish to connect to from the list (please refer to the picture below). The virtual key-
board will be shown at the bottom of the screen, enter your Wi-Fi network password
and hit “OK”, your device should now be connected!

8.How to connect Blutooth? 9. Surfing the Net
When connecting a Bluetooth device for the first time (such as Bluetooth Speaker/ Head-
set), you will need to match said device with your projector.
Steps: 1. Please select the “ Bluetooth device” that you wish to connect to;
2. Press the main interface on the remote controller until the main screen appears,
click on “Settings”, find the “Bluetooth” device you wish to connect to, and
select said device,
3. Select the “Bluetooth device” which you want to link in the list, click the
device and then connect it is ok.
Please press the main interface on the remote controller until the main screen appears,
press “Home” and then “ Browser”. The default website is Google, For other
websites, please enter the correct URL that you need. (eg. www.yahoo.com.)

10.File Management 11.Local Play
Put the USB stick with audio, video, or photo into the USB2.0 or USB3.0 interface, press
the main interface on the remote control until the main screen appears.
Press “Multi-Media,” and find the “ Local disk device,”select the “sda1" and then
the file you wish to play.
Note: Please try using the included office software when a file cannot be opened directly.
Please press the main interface on the remote control until the main screen appears,
select “Multi- Media” and then “ES explorer”, finally, select the “sda1” in “Local”;
Select the file that you wish to modify, and in mouse-mode right click the file in order
to copy, paste, or delete said file.

12.APK Install Instructions 13.Wireless Display for Android
IMPORTANT : Android devices require Android OS 4.4 or later and the wireless screen
mirroring capability to connect wirelessly with the projector.
1. Connect the projector to a wireless network (the same network as your android device).
2. Scan the QR code to download Happy Cast app.
3. Enable Happy Cast app on your mobile
4. Connect Happy Cast on your mobile with the projector; “Cast KX” in the connection list
5. Press the Play button on Happy Cast app on your mobile to start casting.
Note: Android mobile devices, please follow the instructions to project with HappyCast.
Instructions can be found within the Happy Cast application
Please press the main interface on the remote control, whent he main screen appears,
select the “Apps Center ”, find the “ APP Store”, and select the “Play Store”. The Play
Store will allow you to install and modify any application on your projector.

14.Wireless Display for iOS
14.Wireless Display for iOS~2
1. Connect the projector to a wireless network(the same network as your mobile device).
2. Open the Happy Cast app on projector’s home screen.
3. Connect the iOS device to the same wireless network as your projector
4. Open Airplay on your iOS device and connect with “ Cast KX” in the connection
list.
Note: Due to future possible iOS updates, the Happy Cast app may not work particularly
well when trying to cast to the projector via the wireless display function.
Step: Open Airplay on your IOS device and click the “CastKX” button
in the connection list.

16.How to Charge
1. To charge when the projector is off: when the projector is connected via the DC-In
power adapter, put the main power switch in the “OFF” position, your device should
now be charging.
2. To charge when projector is on: when the projector is connected via the DC-In
power adapter, put the main power switch in the “ON” position, a charging notification
icon" should now appear on the top-right of the main interface.
15.3D Function
NOTE: 1. Please сharge the battery with the original power adapter;
2. The product is only uitable for a non high-temperature environment;
3. When the device is charging, do not block ANY ventilation holes;
4. Please avoid stabbing, crushing, or any damage to the device and battery.
5. Do NOT get the battery wet, avoid use in high-humidity environments.
1. 3D video play:
When playing video; compatible DLP 3D formats of videos will be automatically recogni-
zed, the projector will automatically switch to 3D mode; if this is unsuccessful, please press
the “3D” button on theremote control, when the main screen appears, select “ 3D convers-
ion” and “up-down” or “left-right” fdepending on your video files format.
2. 3D to 2D video:
When playing a native DLP 3D video format, please press “3D” on the remote control.
Once the “Main Screen” has appeared, select “3D Conversion” and set to “3D-2D”.
Note: Please download DLP 3D compatible video formats, red and blue 3D are not comp-
atible.
Please wear DLP Link 3D glasses when you watch your DLP 3D movies/videos.

Instruction Manual
CB400
To get a better view, please use this projector in a semi dark room.
Please use this projector carefully, dropping it may cause damage to parts, or result in
a blurred image or abnormal displaying.
INSTALLATION
POWER
CLEANING
High temperature attention
Warning tips
Be careful while using the power cord, avoid excessive bending. Damaging the power cable
may cause electric shock and fire.
It is better to unplug the power cord after powering off.
Unplug the power cable first.
Clean the shell regularly with a damp cloth, neutral detergent can be used.
Please use a glasses cloth or lens paper, not to scratch the lens.
Please clean projector’s vents and speakers regularly by banister brush, or the vents will be blocked.
When you’ve finished using the projector the exhaust port may be very hot, be careful not to burn
yourself. While projecting, please do not look the lens directly as it may hurt your eyes.
Do not disassemble the projector, this may cause electric shock and voids the warranty.
Please do not put any liquids or weight on the projector.
To insure consistent heat exhaustion, please open the height bracket in the bottom before starting.
17.Safety Instruction
iCODIS