ICODIS CB-200 User manual

User manual
iCODIS
CB-200
Please read the safety information carefully before using this product.

Catalogue
1.Parts and components 1
Watching Projector
2.Using the Touch Pad 2
3.Starting up guide 4
Copy Files
4.Icon instruction 5
5.Connect to wireless network 6
6.DLNA -eShareDMC for Android 7
7.Android Miracast - Wireless Screen Mirroring 9
8.Apple AirPlay - Wireless Screen Mirroring 10
9.Airplay connect Apple computers 11
10.Windows Teamviewer--Wireless Screen Mirroring 12
11.DLNA application introduction
HDMI application introduction
Kindly Reminder
Software Update
13
12.Additional Options 14
13.3D Settings 15
14.Watching 2D to 3D on internet 17
15.Important Safety instructions 18
16.Maintenance 19
17.CB-200 Summary of common questions 20
18.SPECIFICATIONS 24

Due to the high temperature of vent area, do not get close to the vent area.
Do not touch the lens when using the projector. The lens may be damaged.
!
1
Touch pad
Lens
USB2
Power On/Off Button
Reset
Speaker
Touch pad
Battery Charge Indicator
Speaker
Speaker
Speaker
Focus Ring
Micro USB
TF Card
HDMI
Headphone
DC in Port
Parts and components

Using the Touch Pad
Watching Projector
*This user manual is an example to help users understand how to operate the
product and may look different from the actual screen.
• Turning the Projector On First Time
1. Connect the power cord correctly to turn the projector on.
2. Press the power button on the right side of projector.
3. On the Selection screen, select the language, WLAN, time zone you want.
4. Google log-in is optional. (Google log-in is necessory to use google play)
You can operate the projector by touching or draging touch pad left/right, up/down.
Touch pad functions tend to be affected by compatibility with appplications.
Select, wake up
projector
Moving the cursor Drag and up/down
screen scroll
Turns screen to
left, right
1.Single tapping 2.Single dragging 3.Two point swipe
(Up/Down)
4.Two point swipe
(Right/Left)
Basic functions
!
2

Touch pad
Speaker
Headphone
DC in Port
• Focus of the Screen Image
When an image appears on the screen, check if it is in focus and fits the screen
properly. To adjust the focus of the image, rotate the focus ring.
• Using the projector
1. When in standby mode, press the power button to turn the projector on.
2. Control the projector using the following buttons while watching the screen.
3.To turn the projector off, press the power button long and then select ok.
• Using the battery
1. As your battery is low, the projector will be turned off in a minute.
2. If the screen shows a low battery message, be sure to charge the battery.
Battery Charge Indicator
Red: Charging
Turned off: Charging complete
Battery using time information
Charging: About 5 hours
Usage Hours: Up to 1.5 hours
(Available battery using time up to 1.5 hours when battery mode set to Max.)
Screenshot
Task manager
eShareDMC(DLNA)
Home
Back
Volume +/-
Brightness +/-
Keystone +/-
Miracast
Only use the official power cord provided by iCODIS. Do not use other power cords.
!
Battery Charge Indicator
3

Battery Charge Indicator
Headphone
Starting up guide
As the picture below,
choose language first,
click arrow in the right to next step
Dialog box “WLAN” appears,
click skip
Set location, Google services, date and time, click right arrow to next step,
then enter main page
4

Icon instruction
After switch on, enter the main page above
Big icons ( from left ) indicate separately:
Video Player, Music player, Explorer,
Gallery, File Manager, Settings, Air receiver,
Pay Store, Applications.
Small icons ( from left ) indicate separately:
Screen shot, recently applications ( drag to
log off ), e-share DM wireless button,
3D button, Android screen mirror ( Miracast ),
home, back, volume down, volume up.
Copy Files
Copy files from U flash disk to internal
storage:
1. Plug in U flash disk, click U flash disk’s
location in File Manager, find the files to be
copied, click shortcut keys displaying
“paste”, “delete”, “copy”, “cut”, tick the file,
click “copy”.
2. Choose a location for the file ( in internal
storage or SD card ), click shorcut keys,
choose “paste”.
Return
key Device memoryMemory card U disk Picture Video Tool
box Shortcut key
5

Connect to wireless network
Click Settings, turn on WLAN, choose available router, enter correct
password, Wi-Fi can be connected
6

DLNA -eShareDMC for Android
Wirelessly connected to projector using the same Wi-Fi
1. Download E-share DMC application at http://www.icodis.co.kr/chinese/download.html
choose first icon “ icodis E-share DMC APK” download a E-share APP in your mobile phone,
and install it in phone.
2. Click Wi-Fi icon at the bottom of desktop, the projector will display two-dimension code (as picture )
3. Select ‘device’ on
e-ShareDMC app menu
4. Select ‘Direct’ icon, and
then select QR code scan 5. Scan QR code
7

6. Select Renderer – Codis eShare,
Media server – Local eShare
Media Server
8. Play via projector7. Select file then play
8

Android Miracast - Wireless Screen Mirroring
You can enjoy contents on another device with you projector via wireless connection.
1. Click Miracast icon on the bottom of projector screen
2. Turn on Miracast function on your smart Android 4.4.2 version and above phone or tablet PC
(Name by manufacturer: Samsung-Screen Mirroring, LG-Miracast)
3. Choose CB-200 on the list of connectable device
4. Allow the access request on your projector.
5. Connected screen will be displayed on your projector.
Please turned on Wi-Fi
before using Miracast function.
The devices need under same Wi-Fi.
Wireless Mirroring performance
tends to be affected by Wi-Fi
signal interuption.
!
9

Apple AirPlay - Wireless Screen Mirroring
You can enjoy contents on another device with you projector via wireless connection.
1.Execute AirReceiver application on your projector.
2.Select Renderer and AirPlay on the AirReceiver menu.
3.Click AirPlay on control center of iPhone or iPad.
4.Select CB-200 and Mirroring on the device list.
AirReceiver(CB-200)
(CB-200)
(CB-200)
10

Airplay connect Apple computers
1. Click “ preferences ” at the lower right corner of windows table
2. Click “ Airplay monitor ”, it displays Air-receiver ( CB-200 ), click ‘connect’
3. After connected, one more blue “ AirPlay ” icon will be in taskbar of computer.
4. To disconnect, click “AirPlay” icon at the upper right corner, choose “ disconnect Airplay screen ”
Please connect on your iOS device and projector to the same Wi-Fi network before using AirPlay.
When Wi-Fi is not available, you can use mobile hotspot of iOS device to connect to your projector.
Wireless Mirroring performance tends to be affected by Wi-Fi signal interuption.
!
11

Windows Teamviewer--Wireless Screen Mirroring
1. Computer and projector both need to download and install Teamviewer ( Download
“PC version” in your computer, Download “Android version” in your projector )
2. After installing in computer, get ID and password according to hint settings.
3. Install the Android version on projector and open it.
4. Input ID and password obtained from computer, click “confirm”, then click “continue” to
synchronize with computer.
12

DLNA application introduction
DLNA is the agreement for solution of mobile devices, through this agreement android phones
and pads can transport videos, pictures and music mutually (Caution: projector and phones must
be connected to the same stable wireless network)
HDMI application introduction
Can connect electronic devices with HDMI output function, as Top BOX, Bluetooth DVD player,
PC, Laptop, Game Machine ect.
One side connects to the interface of HDMI output signal device, the other side connect to the
interface of CB-200 projection HDMI.
(Note: the connection line is the HDMI MiNi line, need to be purchased separately)
Kindly Reminder
This projector is manufactured by high-precision technologies, if you see black or bright sopts
on screen, it is normal, not malfunction.
The device can be updated to the latest software.
• Updating over the air
The device can be updated to the latest software by the over-the-air service.
1. Download SW update file on website www.icodis.co.kr
2. Execute ‘Update’ Application
3. Check available SW update (click the icon on the center of screen).
3. Select Local update and then choose downloaded SW update file
4. Press the update button.
(Waiting until updating completed, device will be rebooted after updating)
Software Update
13

• Screen Rotation
You can use your projector on ceiling mode and rear projection mode.
Press settings > Select Display menu > Select horizontal flip or vertical flip
Additional Options
• Keystone correction
To prevent the screen image from becoming trapezoidal, Keystone adjusts the top
and bottom width of the image if the projector is not set up at a right angle to the
screen. Because the Keystone function may cause inferior screen image quality, use
this function only when it is not possible to set up the projector at an optimal angle.
Or Press settings > Select Display menu > Keystone Adjust
You can use Keystone function on the main page
3
4
2
14

1. CB-300 supporting 2D to 3D online video player: YouTube HD video
3D Settings
1. Find the file manager in the main page, go to TF card or U-disk file,
click on the 3D video source in it and select player to play.
2. Select 3D player mode according to video format.
3. Wearing a pair of DLP Link 3D glasses after the successful pairing,
then you can enjoy the exclusive big 3D screen.
14
15

4. How to change left and right style 3D movies
5. How to enhance the effect
16

Watching 2D to 3D on internet
1. Find YouTube videos in APPS, click on the movies you like to play.
2. Click on the 3D settings menu, choose the 3D mode for “2D” to “3D”, and then select
the full screen display. Now you can watch 3D movies by wearing DLP link 3D glasses
( as shown below ).
Reminder:
CB-200 supporting 2D to 3D online video player: YouTube HD video
17

Important Safety instructions
Installation
Power Supply
Cleaning
Attention to fire and electric shock
High temperature attention
. For best performance, please use this projector in dark room
. Carefully use this projector, falling or bumping may damage the internal components or
lead to display malfunction and blurred images.
. Cautiously use power line, avoid folded. Power damage may cause electric shock or fire.
. After use, remember to unplug the power lilne.
. Pull off power cable.
. Clean the cabinet by wet cloth periodically, such as serious dirt, can use a neutral detergent.
Do not use strong cleaning agents or solvents (such as alcohol or dilute release).
. Use a lens cloth or lens paper to clean lens, not to scratch or the lens.
. Use a soft brush to clean the speaker and vent of the machine regularly. Otherwise the vents
are clogged with dust that may cause overheating, resulting in machine failure.
. Ensure adequate ventilation and air vents are not blocked, so as not to affect the projector
ventilation.
. Avoid foreign bodies such as the machine paper. Do not insert any metal objects in this
machine, such as wire or screwdriver. If there is any object falling into the machine, turn
off the power immediately and then be maintained by the professional staff.
. Do not arbitrarily open the projector, there is the risk of electric shock and the impact of
normal warranty.
. Do not put any liquids on this machine.
When it is projecting or just finish projection, the exhaust port will become hot. Hand touching
may cause burns. When this machine is in power, do not look at the lens directly,otherwise it
may hurt your eyes.
18