ICON ENVISAGE NTC-CCS-2000 Series User manual

ENVISAGE® All-In-One Water Management Console Assembly
Instructions NTC-CCS-2000 Series
Phillips Screw Driver
All-In-One Computer
Keyboard
Clamp
Mounng Bracket (Aached to Computer)
Mounng Rod
3mm & 4mm Allen Wrench
(included)
Base Screw
Mounng Screw x2
COMPUTER SETUP INSTRUCTIONS
TOOLS REQUIRED
INCLUDED IN THE BOX
page 1
I-CON Systems, Inc. - For product support call 1-866-730-7192 or visit us online at support.i-con.com
Continued Next Column Continued on Next Page
INCLUDED IN THE BOX
Rev 032619
Base

Use base screw to secure mounng rod to base.
Loosen or disassemble clamp.
Slide clamp onto mounng rod and ghten.
Line up bracket on computer with bracket on clamp, and place
the computer on stand.
NTC-CCS-2000 Series
Step 1
Step 2
Step 3
Step 4
page 2
ENVISAGE® All-In-One Water Management Console
Assembly Instructions
Included In The Box Continued
USB Network Interface
*Wireless Network Interface Shown
ASSEMBLY INSTRUCTIONS
Mouse
Continued Next Column Continued on Next Page
I-CON Systems, Inc. - For product support call 1-866-730-7192 or visit us online at support.i-con.com Rev 032619

Secure mounng plates together with screws.
Loosen screws on adjustment bracket to posion monitor. Once
monitor is posioned as desired, re-ghten screws.
Plug in power cord on le side.
Plug in keyboard, mouse, and network interface into any of USB
ports. 4 USB ports are on le side of monitor and 2 are on right
side of monitor.
NTC-CCS-2000 Series
Step 5
Step 6
Step 8
Step 7
page 3
ENVISAGE® All-In-One Water Management Console
Assembly Instructions
Assembly Instructions Continued
ASSEMBLY COMPLETE
Continued Next Column
I-CON Systems, Inc. - For product support call 1-866-730-7192 or visit us online at support.i-con.com Rev 032619