Iconic Displays Breeze Classic Pop Up Display User manual

Frame
Channel Bars in Bag
Center Panels
Endcaps
Halogen Light(s)
Emergency Repair Kit
Fabric or Graphic Case Wrap*
Position frame in
front of you with
the Black hubs at
t h e t o p , a n d
facing you.
Contents of Case
Expanding the Frame
Channel Bars
Attaching Panels
Attach panels in order,
left to right or right to
left, and finish with the
end caps.
It may be necessary to
adjust panels for improved
alignment.
step1
step2
step3
step4
step1
step2 & 3
step4
STEP 1
Installing Lights
STEP 2
STEP 3
STEP 4
*Not always included
Lock ALL the
connectors
Pull the frame
upwards extending
in all directions.
Breeze Classic Pop Up Display Assembly Instructions

Starting at the top, r
and pack in their carry bag.
emove the channel bars
Stand in front of the frame and collapse it by
gently pulling the left and right sides together
as shown. The display will collapse with
minimal effort.
Pack components as shown.
Disassembly & Repacking
Remove panels starting at the bottom and
carefully pulling upward, then unhooking from
the hubs at the top. Roll all the panels together
with the graphic/fabric facing outward.
1
2
3
4
Wrap fabric/graphics
around the case as
shown.
Place top piece
into grooves on
the case lid.
Case to counter conversion
Note:When stored, panels must
be rolled with fabric/print outside.
Before collapsing
frame, release ALL
connectors by
depressing lever.
Breeze Classic Pop Up Display Assembly Instructions