Icop PDX-089T-D5A-512 User manual

PDX-089T-D5A-512 / PDX-089T-D8A-512
PDX-089T-D5A / PDX-089T-D8A
DM&P Vortex86DX Panel PC
with 8.9” TFT LCD
User’s Manual
(Revision 1.1A)

ii
Copyright
The information in this manual is subject to change without notice for continuous improvement in
the product. All rights are reserved. The manufacturer assumes no responsibility for any
inaccuracies that may be contained in this document. And makes no commitment to update or to
keep current the information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part,
in any form or by any means without the prior written permission of the ICOP Technology Inc.
Copyright 2009 ICOP Technology Inc.
Manual No. IUMPDX089-01 Ver.1.2A Feb, 2012
Trademarks Acknowledgment
Vortex86DXis the registered trademark of ICOP Technology Inc. Other brand names or
product names appearing in this document are the properties and registered trademarks of their
respective owners. All names mentioned herewith are served for identification purpose only.

iii
Safety Information
Read these Safety instructions carefully.
Make sure the voltage of the power source is correct before connecting the equipment to
the power outlet.
Do not expose your Panel PC to rain or moisture, in order to prevent shock and fire
hazard.
Keep PDX-089T away from humidity.
Do not open the cabinet to avoid electrical shock. Refer to your nearest dealer for
qualified personnel servicing.
Never touch un-insulated terminals or wire unless your power adaptor is disconnected.
Locate your Panel PC as close as possible to the socket outline for easy access and to
avoid force caused by entangling of your arms with surrounding cables from the Panel
PC.
USB connectors are not supplied with Limited Power Sources.
If the equipment is not used for a long time, disconnect it from the power source to avoid
damage by transient overvoltage.
DO NOTATTEMPT TO OPEN OR TO DISASSEMBLE THE CHASSIS
(ENCASING)OF THIS PRODUCT.PLEASE CONTACT YOUR DEALER FOR
SERVICING FROM QUALIFIED TECHNICIAN.

T a b l e o f C o n t e n t s
T a b l e o f C o n t e n t s .............................................................iv
C h a p t e r 1 General Information..…………………………………1
1.1 Product Description................................................ 1
1.2 Product Specifications............................................ 2
1.3 Inspection standard for TFT-LCD panel.................. 4
1.4 Product Dimension................................................. 7
1.5 Ordering Information .............................................. 8
1.6 Packing List............................................................ 8
C h a p t e r 2 System Installation................................................. 9
2.1 CPU Board Outline................................................. 9
2.2 Connector Summary .............................................11
2.3 Connector Pin Assignments ................................. 12
2.4 External I/O Overview .......................................... 15
2.5 External I/O Pin Assignment................................. 16
2.6 System Mapping................................................... 18
2.7 Watchdog Timver ................................................. 18
C h a p t e r 3 Driver Installation…..………………………………..22
3.1 PDX-089T Development Note.............................. 23
3.2 BIOS Defaul Setting ............................................. 26
Warranty............................................................................................ 27

v
This page is blank

PDX-089T DM&PVortex86DXPanel PC with 8.9” WSVGA TFT LCD
1
C h a p t e r 1
General Information
1.1 Product Description
PDX-089T is an ultra compact platform for the present demanding embedded and productive
applications. It has new Vortex86DX SoC CPU which consumes only minimum power
requirement when running at 1GHz, and DDR2 memory provides faster data transfer rate. By
using 8.9” TFT LCD, PDX-089T becomes the perfect choice for a limited budget. In additional,
the integrated 10/100M Ethernet port supplies the communication capability which makes
PDX-089T can be more widely used when running with Linux, Windows CE, and Windows XP
environment to become the perfect solution for system integration.
8.9” WSVGA TFT LCD
4-Wire Resistive Touch Panel
DM&P Vortex86DX SoC 1GHz
256/512MB DDR2 system memory
AMI BIOS
2 watchdog timer
Compact Flash Type I/II / Micro SD
10/100Mbps Ethernet
2 USB 2.0 (host)
1 RS-232/485/422 ports
Mini-PCI Socket (Wi-Fi Optional)
AudioOut
Single voltage +5V DC(5A Version)
Multi voltage +8~+35V DC(8A Version)
Fanless Design
Operating temperature range of -20°C
to +60°

PDX-089T DM&PVortex86DXPanelPCwith8.9”WSVGATFTLCD
2
1.2 Product Specification
CPU Board Specifications
CPU DM&P Vortex86DX 1GHz
Cache L1:16KB I-Cache, 16KB D-Cache
L2: 128KB Cache
BIOS AMI BIOS
Memory 256/512MB DDR2 onboard
Watchdog Timer Software programmable from 30.5u to 512 seconds x 2 sets
LAN Integrated 10/100M Ethernet
Audio CM119 Line-Out
Internal Drives Compact Flash Type I/II slot
Micro SD slot
I/O
RS-232/422/485 x 1
USB ports (Ver2.0) x 2
RJ-45 Port x 1
Expansion Slot Mini-PCI socket x 1 (Internal)
Mechanical & Environment
Power Requirement Single Voltage +5VDC ( 5A )
Multi Voltage +8~+35VDC ( 8A )
Power Consumption 1.3A@5VDC
Operating Temperature
-20 ~ +60 ℃(-4 ~ +140 ℉)
Storage Temperature -20 ~ +70 ℃(-22 ~ +158 ℉)
Dimensions 236.6 x 146 x 35mm (9.31 x 5.75 x 1.38 inches)
Weight 468g
Front Panel Protection
IP 65
Certification CE, FCC, VCCI, Vibration

PDX-089T DM&PVortex86DXPanelPCwith8.9”WSVGATFTLCD
3
LCD Specifications
Display Type 8.9” TFT LCD
Backlight Unit LED
Display Resolution 1024(W) x 600(H)
Brightness (cd/m2) 220 nits
Contrast Ratio 500:1
Display Color 262,144
Pixel Pitch (mm) 190.5 (H) x 189 (V)
Viewing Angle Vertical 110o,
Horizontal 140o
Backlight Lifetime 25,000 hrs
Touchscreen
Type Analog Resistive
Resolution Continuous
Transmittance 80%
Controller USB interface (RS-232 interface)
Software Driver Linux/WinCE/WinXP
DOS(RS-232 interface only)
Durability 1 million

PDX-089T DM&PVortex86DXPanelPCwith8.9”WSVGATFTLCD
4
1.3 Inspection standard for TFT-LCD Panel
DEFECT TYPE LIMIT Note
VISUAL
DEFECT INTERNAL
SPOT
φ＜0.15mm Ignore
Note1
0.15mm≦φ≦0.5mm N≦4
0.5mm＜φN=0
FIBER 0.03mm<W≦0.1mm, L≦5mm N≦3 Note1
1.0mm＜W, 1.5mm＜L N=0
POLARIZER BUBBLE
φ＜0.15mm Ignore Note1
0.15mm≦φ≦0.5mm N≦2
0.5mm＜φN=0
Mura It’ OK if mura is slight visible through 6%ND filter
ELECTRICAL
DEFECT
BRIGHT DOT
A Grade B Grade
C Area
O Area
Total
C Area O Area Total
Note3
N≦0
N≦2
N≦2
N≦2 N≦3 N≦5
Note2
DARK DOT N≦2
N≦3
N≦3
N≦3 N≦5 N≦8
TOTAL DOT N≦4 N≦5 N≦6 N≦8
Note2
TWO ADJACENT DOT N≦0
N≦1
pair
N≦1
pair
N≦1
pair
N≦1
pair
N≦1
pair Note4
THREE OR MORE
ADJACENT DOT NOT ALLOWED
LINE DEFECT NOT ALLOWED
(1) One pixel consists of 3 sub-pixels, including R,G, and B dot.(Sub-pixel = Dot)
(2) LITTLE BRIGHT DOT ACCEPTITABLE UNDER 6 % ND-Filter
(3) If require G0 grand (Total dot N≦0), please contact region sales.

PDX-089T DM&PVortex86DXPanelPCwith8.9”WSVGATFTLCD
5
[Note1] W : Width[mm], L : Length[mm], N : Number, φ: Average Diameter
[Note2] Bright dot is defined through 6% transmission ND Filter as following.

PDX-089T DM&PVortex86DXPanelPCwith8.9”WSVGATFTLCD
6
[Note3]
C Area: Center of display area
C Area: Outer of display area
[Note4]
Judge defect dot and adjacent dot as following. Allow below (as A, B, C and D status) adjacent
defect dots, including bright and dart adjacent dot. And they will be counted 2 defect dots in total
quantity.
(1) The defects that are not defined above and considered to be problem shall be reviewed and
discussed by both parties.
(2) Defects on the Black Matrix, out of Display area, are not considered as a defect or counted.

PDX-089T DM&PVortex86DXPanelPCwith8.9”WSVGATFTLCD
7
1.3 Product Dimension

PDX-089T DM&PVortex86DXPanelPCwith8.9”WSVGATFTLCD
8
1.4 Ordering Information
Part Number Description
PDX-089T-D5A-512 8.9” Panel PC w/512MB
DDR2/2USB/Line-Out/LAN/COM/CF/MicroSD/Power Adapter
PDX-089T-D8A-512 8.9” Panel PC w/512MB
DDR2/2USB/Line-Out/LAN/COM/CF/MicroSD/8-35 DC support
PDX-089T-D5A (BTO) 8.9” Panel PC w/256MB
DDR2/2USB/Line-Out/LAN/COM/CF/MicroSD/Power Adapter
PDX-089T-D8A (BTO) 8.9” Panel PC w/256MB
DDR2/2USB/Line-Out/LAN/COM/CF/MicroSD/8-35VDC support
1.5 Packing List
Part Number Package
PDX-089T-D5A-512 PDX-089T-5A-512
Power-20W-3PIN
PDX-089T-D8A-512 PDX-089T-8A-512
PDX-089T-5DA (BTO) PDX-089T-5A
Power-20W-3PIN
PDX-089T-D8A (BTO) PDX-089T-8A
WLAN KIT (Optional) MINI-PCI-WLAN-CARD
WIRELESS-ANTENNA-157
WIRELESS-CABLE-90MM

PDX-089T DM&PVortex86DXPanelPCwith8.9”WSVGATFTLCD
9
C h a p t e r 2
System Installation
2.1 CPU Board Outline
Bottom View

PDX-089T DM&PVortex86DXPanelPCwith8.9”WSVGATFTLCD
10
2.2 Connector Summary
Summary Table
Nbr Description Type of Connections Pin nbrs.
J1 CF Master/Slave Switch
Slide Switch On/OFF
J3 USB External USB Connector 6-pin
J4 USB External USB Connector 6-pin
J5 USB (Touchscreen) 2.0mm 5-pin wafer 5-pin
J6 J-TAG 1.25mm 6-pin wafer 6-pin
J8 PS/2 Keyboard 2.54mm 5-pin box header 5-pin
J9 PS/2 Keyboard/Mouse External Mini DIN Socket 6-pin
J10 COM1(RS232/422/485)
External D-Sub Male Connector 9-pin
J14 VGA 2.0mm 10-pin box header 10-pin
J27 LVDS connector 1.25mm WAFER20P 20-pin
J18 Micro SD Card Socket Micro SD socket 9-pin
J24 Audio Mic-In 2.0mm 4-pin wafer 4-pin
J29 Power/IDE LED 2.0mm 4-pin wafer 4-pin
RJ45 Ethernet External RJ45 Connector 8-pin
PWR Power Connector (5A) External Mini DIN Socket 3-pin
PWR Power Connector (8A) External Power Plug 2-pin
J23 Audio Line-Out 1.25mm Phone Jack
CF1 CF Card Socket CF Type I/II Socket
J13 Mini-PCI Socket Expansion Mini-PCI Socket
J18 Micro SD Card Socket Micro SD socket

PDX-089T DM&PVortex86DXPanelPCwith8.9”WSVGATFTLCD
11
2.3 Connector Pin Assignments
J1: CF Master/Slave Switch
J3: USB
Pin # Signal Name
Pin # Signal Name
1 VCC 2 USBD2-
3 USBD2+ 4 GND
5 GND 6 GND
J4: USB
Pin # Signal Name
Pin # Signal Name
1 VCC 2 USBD3-
3 USBD3+ 4 GND
5 GND 6 GND
J5: USB (Touchscreen)
Pin # Signal Name
1 VCC
2 USBD1-
3 USBD1+
4 GND
5 GND
J6: J-TAG
Pin # Signal Name
1 VCC
2 GND
3 TCK
4 TDO
5 TDI
6 TMS
Pin # Signal Name
On Master
OFF Slave

PDX-089T DM&PVortex86DXPanelPCwith8.9”WSVGATFTLCD
12
J8: PS/2 Keyboard
Pin # Signal Name
Pin # Signal Name
1 KBCLK 2 KBDAT
3 NC 4 GND
5 VCC
J9: PS/2 Keyboard/Mouse
Pin # Signal Name
Pin # Signal Name
1 KBCLK 2 MSCLK
3 GND 4 KBDATA
5 MSDAT
A
6 VCC
7 GND 8 GND
9 GND
J10: COM1 RS232/422/485 (Change setting by BIOS)
Pin # Signal Name Pin #
Signal Name
1 DCD1/ 422TX- / RS485- 2 RXD1 / 422TX+ / RS485+
3 TXD1 / 422RX+ 4 DTR1 / 422RX-
5 GND 6 DSR1
7 RTS1 8 CTS1
9 RI1
J14: VGA
Pin # Signal
Name Pin # Signal Name
1 R OUT 2 GND
3 G OUT 4 GND
5 B OUT 6 GND
7 HSYNC 8 GND
9 VSYNCD 10 GND

PDX-089T DM&PVortex86DXPanelPCwith8.9”WSVGATFTLCD
13
J27: LVDS Connector
Pin # Signal Name
1 GND
2 3.3V
3 3.3V
4 BRIGHTNESS
5 TXOUT0-
6 TXOUT0+
7 TXOUT1-
8 TXOUT1+
9 GND
10 GND
11 TXOUT2-
12 TXOUT2+
13 TXCLKOUT-
14 TXCLKOUT+
15 GND
16 GND
17 5V
18 5V
19 NC
20 NC
J24: MIC-IN
Pin # Signal Name
1 MICVREF
2 GND
3 GND
4 MIC-IN
PWR: Power Connector (5A)
Pin # Signal Name
1 +5V
2 GND
3 NC
4 GND

PDX-089T DM&PVortex86DXPanelPCwith8.9”WSVGATFTLCD
14
PWR: Power Connector (8A)
Pin # Signal Name
1 + 8 ~ 35V
2 GND
J29: Power/IDE LED
Pin # Signal Name
1 PWRLEDP
2 PWRLEDN
3 IDELEDP
4 IDELEDN

PDX-089T DM&PVortex86DXPanelPCwith8.9”WSVGATFTLCD
15
2.4 External I/O Overview
(Note1: Wireless is optional)
(Note2: COM1 RS232/422/485 is selected by BIOS setting)
PDX-089T-D8A / PDX-089T-D8A-512 PDX-089T-D5A/ PDX-089T-D5A-512