Icop PRTD-090T-5A-N4F User manual

Why choose DSL?
• Over 25 Years
Industry Experience
• 5 Years Warranty
on all Products
• Evaluation Products Available
• Lifetime Technical Support
Our Services
• Electronic Design
• Production Management
• Assembly and Test
• Bespoke BIOS Creation
• Industrial Embedded
PC Solutions
www.dsl-ltd.co.uk
Email us at [email protected]
Call us on [phone]
Electronic
Design
Panel
PC / HMI
Single Board
Computer
Industrial
PC

i
PRTD Panel PC Series with 9”TFT LCD
Model:
PRTD-090T-5A-N4F / PRTD-090T-8A-N4F
PRTD-090T-5A-B4F / PRTD-090T-8A-B4F
PRTD-090T-5A-N5F / PRTD-090T-8A-N5F
PRTD-090T-5A-B5F / PRTD-090T-8A-B5F
User’s Manual
(Revision 1.0A)

i
Revision
Date
Version
Description
2018/07/01
Version 1.0
Initial Release

ii
PRDX-090T PRTD Panel PC Series with 9” WSVGA TFT LCD
Copyright
The information in this manual is subject to change without notice for
continuous improvement in the product. All rights are reserved. The manufacturer
assumes no responsibility for any inaccuracies that may be contained in this
document. And makes no commitment to update or to keep current the
information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted,
in whole or in part, in any form or by any means without the prior written
permission of the ICOP Technology Inc.
Copyright 2018 ICOP Technology Inc.
Manual No. IUMPRTD090-01 Ver.1.0A July, 2018
Trademarks Acknowledgment
PRTDTM is the registered trademark of ICOP Technology Inc. Other brand
names or product names appearing in this document are the properties and
registered trademarks of their respective owners. All names mentioned herewith
are served for identification purpose only.
Safety Information
Read these Safety instructions carefully.
Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
Do not expose your Panel PC to rain or moisture, in order to prevent shock
and fire hazard.
Keep PRTD-090T away from humidity.
Do not open the cabinet to avoid electrical shock. Refer to your nearest
dealer for qualified personnel servicing.
Never touch un-insulated terminals or wire unless your power adaptor is
disconnected.
Locate your Panel PC as close as possible to the socket outline for easy access
and to avoid force caused by entangling of your arms with surrounding cables
from the Panel PC.
USB connectors are not supplied with Limited Power Sources.
If the equipment is not used for a long time, disconnect it from the power
source to avoid damage by transient overvoltage.
DO NOT ATTEMPT TO OPEN OR TO DISASSEMBLE THE CHASSIS (ENCASING)OF THIS
PRODUCT.PLEASE CONTACT YOUR DEALER FOR SERVICING FROM QUALIFIED TECHNICIAN.

iii
PRDX-090T PRTD Panel PC Series with 9” WSVGA TFT LCD
Table of Contents
Table of Contents................................................................................................. iii
1.General Information............................................................................. 1
1.1 Product Description............................................................ 1
1.2 Product Specification ......................................................... 2
1.3 Inspection standard for TFT-LCD Panel .............................. 4
1.4 Product Dimension............................................................. 7
1.5 Panel Mounting Instruction................................................ 9
1.6 Ordering Information ....................................................... 11
1.7 Packing List....................................................................... 13
2.System Installation ............................................................................. 14
2.1 CPU Board Outline............................................................ 14
2.2 Connector Summary......................................................... 15
2.3 Connector Pin Assignments.............................................. 16
2.4 External I/O Overview ...................................................... 18
2.5 External I/O Pin Assignment............................................. 19
3.Android Settings................................................................................. 22
3.1 Enable LED backlight-off function .................................... 22
3.2 Touch calibration.............................................................. 24
Warranty….......................................................................................................... 27

1
PRDX-090T PRTD Panel PC Series with 9” WSVGA TFT LCD
1.General Information
1.1 Product Description
PRTD-090T is an ultra-compact platform for the present demanding
embedded and productive applications. It has RTD1195 Cortex-A7 ARM Dual Core
which consumes only minimum power requirement when running at 1.2GHz, and
DDR3 memory provides faster data transfer rate. By using 9”TFT LCD, PRTD-090T
becomes the perfect choice for a limited budget. In additional, the integrated
Gigabit Ethernet port supplies the communication capability which makes
PRTD-090T can be more widely used when running Android 4.4.4 environments to
become the perfect solution for system integration.

2
PRDX-090T PRTD Panel PC Series with 9” WSVGA TFT LCD
1.2 Product Specification
Table 1-1 Product Specification
CPU Board Specifications
CPU
RTD1195-1.2GHz Cortex-A7 ARM Dual-Core
Cache
L2: 512KB Cache
Memory
1GB/2GB DDR3 onboard
Watchdog Timer
Watchdog timer counter at a fixed 27MHz rate
LAN
Integrated Gigabit Ethernet
Audio
High Definition Audio
Internal Drives
8GB of Flash onboard with Android 4.4.4
Pre-installed
Micro SD slot (Like a card reader only)
I/O
RS-232 x 1
USB port (Ver3.0) x 1
USB port (Ver2.0) x 1
RJ-45 Port x 1
Mechanical & Environment
Power Requirement
Single Voltage +5VDC ( 5A )
Multi Voltage +8~+35VDC ( 8A )
Power Consumption
10W (Max.)
Operating
Temperature
0 ~ +60℃( 32 ~ +140℉) /
-20~+70℃( -4 ~ +158℉) Optional (-I)
Storage Temp.
-30 ~ +70℃( 14 ~ +158℉)
Operating Humidity
0% ~ 90% relative humidity, non-condensing
Dimensions
236.6 x 146 x 35mm (9.31 x 5.75 x 1.38 inches)

3
PRDX-090T PRTD Panel PC Series with 9” WSVGA TFT LCD
Weight
755g
Front Panel
Protection
IP 65
Certification
CE / FCC / VCCI / Vibration / Shock
LCD Specifications
Display Type
9” TFT LCD
Backlight Unit
LED
Display Resolution
1024(W) x 600(H)
Brightness (cd/m2)
300 nits
Contrast Ratio
500 : 1
Display Color
262, 144
Pixel Pitch (mm)
190.5 (H) x 189 (V)
Viewing Angle
Vertical 120o,
Horizontal 140o
Backlight Lifetime
18,000 hrs
Touchscreen
Type
Analog Resistive
Resolution
Continuous
Transmittance
80%
Controller
USB interface
Software Driver
Android
Durability
1 million

4
PRDX-090T PRTD Panel PC Series with 9” WSVGA TFT LCD
1.3 Inspection standard for TFT-LCD Panel
Table 1-2 Inspection Standard
DEFECT TYPE
LIMIT
Note
VISUAL
DEFECT
INTER
NAL
SPOT
φ＜0.15mm
Ignore
Note1
0.15mm≦φ≦0.5mm
N≦4
0.5mm＜φ
N=0
FIBER
0.03mm<W≦0.1mm, L≦
5mm
N≦3
Note1
1.0mm＜W, 1.5mm＜L
N=0
POLARIZER
BUBBLE
φ＜0.15mm
Ignore
Note1
0.15mm≦φ≦0.5mm
N≦2
0.5mm＜φ
N=0
Mura
It’ OK if mura is slight visible through 6%ND filter
ELECTRICAL
DEFECT
BRIGHT DOT
A Grade
B Grade
C
Area
O
Area
Total
C
Area
O
Area
Total
Note3
N≦0
N≦2
N≦2
N≦2
N≦3
N≦5
Note2
DARK DOT
N≦2
N≦3
N≦3
N≦3
N≦5
N≦8
TOTAL DOT
N≦4
N≦5
N≦6
N≦8
Note2
TWO ADJACENT DOT
N≦0
N≦1
pair
N≦1
pair
N≦1
pair
N≦1
pair
N≦1
pair
Note4
THREE OR MORE
ADJACENT DOT
NOT ALLOWED
LINE DEFECT
NOT ALLOWED
(1) One pixel consists of 3 sub-pixels, including R, G, and B dot.
(Sub-pixel = Dot)
(2) LITTLE BRIGHT DOT ACCEPTITABLE UNDER 6 % ND-Filter
(3) If require G0 grand (Total dot N≦0), please contact region sales.

5
PRDX-090T PRTD Panel PC Series with 9” WSVGA TFT LCD
[Note 1] W : Width[mm], L : Length[mm], N : Number, φ: Average Diameter.
1. White / Black Spot
2. Polarizer Bubble
Fig 1-1
Fig 1-2
[Note 2] Bright dot is defined through 6% transmission ND Filter as following.
Fig 1-3

6
PRDX-090T PRTD Panel PC Series with 9” WSVGA TFT LCD
[Note 3]
C Area: Center of display area
O Area: Outer of display area
[Note 4]
Judge defect dot and adjacent dot as following. Allow below (as A, B, C and D
status) adjacent defect dots, including bright and dart adjacent dot. And they will
be counted 2 defect dots in total quantity.
R
R
G
G
R G
R
R
G
G
R G
R
R
G
G
R G
R
R
G
G
R G
R
R
G
G
R G
R
R
G
G
R G
R
RDefect Dot
Adjacent Dot
A
B
C
D
(1) The defects that are not defined above and considered to be problem shall
be reviewed and discussed by both parties.
Defects on the Black Matrix, out of Display area, are not considered as a defect or
counted.

7
PRDX-090T PRTD Panel PC Series with 9” WSVGA TFT LCD
1.4 Product Dimension

8
PRDX-090T PRTD Panel PC Series with 9” WSVGA TFT LCD
Fig 1-4 Product Dimension

9
PRDX-090T PRTD Panel PC Series with 9” WSVGA TFT LCD
1.5 Panel Mounting Instruction
1. Cut a mounting hole in the panel. (Refer to PRTD‐090T Dimensions
on page 7) (Note 1)
2. Check and remove the twelve M3 screws in a diagonal pattern as
image below if necessary.
3. Place PRTD‐090T face‐down on a clean, flat surface.
4. Slide the panel cutout around the back of PRTD‐090T, until the panel
rests directly on the gasket. Make sure the screw holes align with the
screw holes on PRTD‐090T.
5. The screw size is M3*L (L=wall thickness + 6.0mm) (Note 2)
6. Insert all twelve M3 screws into the screw holes. (Note 2)
7. Finger-tighten the M3 screws. Finish tightening the M3 screws in a
diagonal pattern using an M3 screw driver (see the image as below);
maximum torque 1.18Nm (12 kgf‐cm).

10
PRDX-090T PRTD Panel PC Series with 9” WSVGA TFT LCD
Note 1:
It is strongly recommended that a professional machine shop cut the
mounting hole in the panel.
Note 2:
The length for all twelve M3 screws will be according to the thickness of
mounting panel. For example: The length of standard M3 screws for PRTD‐090T
is 6mm. If the thickness of your mounting panel is 3mm and washer thickness is
1mm, you have to use 10mm M3 screw.

11
PRDX-090T PRTD Panel PC Series with 9” WSVGA TFT LCD
1.6 Ordering Information
Product Code
LCD Size
DC-Input Type
BT&WLAN
DRAM
Flash onboard
Wide Temp.
PRTD
057T
090T
5A (DC5V)
8A (DC8~35V)
N (No BT&WLAN)
B (With BT&WLAN)
4 (1GB)
5 (2GB)
F (8GB-MLC)
I (Wide Temp.)
1. Product Code：Code 1~3。
PRTD：PRTD Series。
2. LCD Size：Code 4~7。
057T：5.7” LCD with touchscreen。
090T：9” LCD with touchscreen。
3. DC-Input Type：Code 8~9。
5A：Audio Line-out and Singal DC5V Power Input。
8A：Audio Line-out and Support DC8~35 Power Input。
4. BT&WLAN：Code 10。
N：No BT&WLAN。
B：With BT&WLAN。
5. DRAM Onboard：Code 11。
4：1GB。
5：2GB。
6. Flash Onboard：Code 12。
F：8GB。
7. Wide Temp.：Code 13。
I：Support Wide Temp. -20~+70℃。(Optional)
(Standard version doesn’t need to show this item.)

12
PRDX-090T PRTD Panel PC Series with 9” WSVGA TFT LCD
Table 1-3 Ordering Information
PART NUMBER
DESCRIPTION
PRTD-090T-5A-N4F
9”Panel PC w/1GB DDR3
/ 8GB eMMC / USB2.0 / USB3.0 / Line-Out / LAN / COM / MicroSD /
Power Adapter
PRTD-090T-8A-N4F
9”Panel PC w/1GB DDR3
/ 8GB eMMC / USB2.0 / USB3.0 / Line-Out / LAN / COM / MicroSD /
8-35 DC Support
PRTD-090T-5A-N5F
9”Panel PC w/2GB DDR3
/ 8GB eMMC / USB2.0 / USB3.0 / Line-Out / LAN / COM / MicroSD /
Power Adapter
PRTD-090T-8A-N5F
9”Panel PC w/2GB DDR3
/ 8GB eMMC / USB2.0 / USB3.0 / Line-Out / LAN / COM / MicroSD /
8-35 DC Support
PRTD-090T-5A-B4F
9”Panel PC w/1GB DDR3
/ 8GB eMMC / USB2.0 / USB3.0 / Line-Out / LAN / COM / MicroSD /
Bluetooth & WLAN / Power Adapter
PRTD-090T-8A-B4F
9”Panel PC w/1GB DDR3
/ 8GB eMMC / USB2.0 / USB3.0 / Line-Out / LAN / COM / MicroSD /
Bluetooth & WLAN / 8-35 DC Support
PRTD-090T-5A-B5F
9”Panel PC w/2GB DDR3
/ 8GB eMMC / USB2.0 / USB3.0 / Line-Out / LAN / COM / MicroSD /
Bluetooth & WLAN / Power Adapter
PRTD-090T-8A-B5F
9”Panel PC w/2GB DDR3
/ 8GB eMMC / USB2.0 / USB3.0 / Line-Out / LAN / COM / MicroSD /
Bluetooth & WLAN / 8-35 DC Support

13
PRDX-090T PRTD Panel PC Series with 9” WSVGA TFT LCD
1.7 Packing List
Table 1-4 Packing List
PART NUMBER
PACKAGE
PRTD-090T-5A-N4F
PRTD-090T-5A-N4F
Power-20W-3PIN-X & PowerHead-US/EU
PRTD-090T-8A-N4F
PRTD-090T-8A-N4F
PRTD-090T-5A-N5F
PRTD-090T-5A-N5F
Power-20W-3PIN-X & PowerHead-US/EU
PRTD-090T-8A-N5F
PRTD-090T-8A-N5F
PRTD-090T-5A-B4F
PRTD-090T-5A-B4F
Power-20W-3PIN-X & PowerHead-US/EU
WIRELESS-ANTENNA-157
PRTD-090T-8A-B4F
PRTD-090T-8A-B4F
WIRELESS-ANTENNA-157
PRTD-090T-5A-B5F
PRTD-090T-5A-B5F
Power-20W-3PIN-X & PowerHead-US/EU
WIRELESS-ANTENNA-157
PRTD-090T-8A-B5F
PRTD-090T-8A-B5F
WIRELESS-ANTENNA-157

14
PRDX-090T PRTD Panel PC Series with 9” WSVGA TFT LCD
2.System Installation
2.1 CPU Board Outline
Fig 2-1 PRTD CPU Board

15
PRDX-090T PRTD Panel PC Series with 9” WSVGA TFT LCD
2.2 Connector Summary
Table 2-1 Summary Table
Nbr
Description
Type of Connections
Pin nbrs.
J2
USB 3.0
External USB 3.0 Connector
9-pin
J3
Micro SD Card Socket
Micro SD socket
9-pin
J5
USB 2.0
External USB 2.0 Connector
6-pin
J6
USB 2.0
(For Touch Controller)
2.0mm 5-pin wafer
5-pin
J8
Audio Line-Out
1.25mm Phone Jack
5-pin
J11
Software Programming
Port (Reserved)
External Mini DIN Socket
6-pin
J12
COM1 (RS232)
External D-Sub Male Connector
9-pin
J22
I2C
(For External Garmmar
Firmware Programming)
1.25mm 4-pin wafer
4-pin
RJ45
Ethernet
External RJ45 Connector
8-pin
PWR
Power Connector (5A)
External Mini DIN Socket
3-pin
PWR
Power Connector (8A)
External Power Plug
2-pin