IDEA CAMERA BIP-VI1A-2M-NEW User manual

SHENZHEN RISE ELECTRONIC CO., LTD.
Website: http://www.ideacamera.com Email:[e-mail]
Global Sources HomepageAddress: http://www.globalsources.com/ideacamera.co
2Mp wireless ai smart battery camera, two-way speech intercom, HD H.265,
Waterproof IP65
Model: BIP-VI1A-2M-NEW
Product features：
◆to install, convenient to use, all wireless, no cable.
◆clear, smooth, intelligent transmission play the network limits.
◆online firmware upgrade, synchronous update function and checkup.
◆Standard H.265 video compression algorithms for high-definition video transmission
over a narrow bandwidth network. High picture quality, low code stream, local HD video,
more smooth viewing, no drag. Compared with H.264 video compression algorithm,the bit
rate is lower and the recording space is less.
◆Support two-way speech intercom, echo elimination, noise suppression.
◆SupportAndroid and IOS intelligent terminal remote real-time monitoring.
◆200W hd pixel (1920X1080), clear picture quality.
◆Red light night vision lighting (night vision distance of 7 meters), 24-hour monitoring,
IR-cut switch, no color during the day, night vision more clear.
◆Built-in rechargeable lithium battery, long battery life, normal operation as long as 6
months, 12 months standby time.
◆supports 2.4G Wi-Fi(IEEE802.11b/g/n).
◆SDcard(supportcloudstorage technology, microsupportupto128GB) storage,mobile
video recording.
◆Support qr code intelligent connection and distribution network.

SHENZHEN RISE ELECTRONIC CO., LTD.
Website: http://www.ideacamera.com Email:[e-mail]
Global Sources HomepageAddress: http://www.globalsources.com/ideacamera.co
◆Support human shape detection, electronic fence, intelligent push, pet snapshot.
◆Easy to install, support 1/4 universal screw support and magnetic suction support.
◆minimum order quantity: 100pcs
Product parameters：
camera items parameters
main processor
SOC 3518E V300 ：900MHz main
frequency
DDR 512M
Image sensor
sensor 1/3"colours CMOS sensor
lens M12, f: 3.3mm, F2.0, 200mp
visual angle H(level)95 degree; V(vertical)55
degree; D(opposite)110 degree
minimum illumination 0.01Lux
audio
input/output two-way voice intercom (with built-in
microphone and speaker)
audio compression
mode AAC
video
video compression
mode H.265
lighting frequency 50Hz, 60Hz
image frame rate 15fps
maximum image size 1920*1080P
night light IRCUT Double filter switch
automatically，10pcs ir leds

SHENZHEN RISE ELECTRONIC CO., LTD.
Website: http://www.ideacamera.com Email:[e-mail]
Global Sources HomepageAddress: http://www.globalsources.com/ideacamera.co
（850nm wave length), irradiation
distance:7meters
network
wireless network 2.4G WIFI(IEEE802.11b/g/n), built-in
aerial
support agreement TCP/IP、UDP/IP、DHCP、RTMP、
MUTP
support IP address dynamic IP address
AI smart function human shape detection, electronic
fence, intelligent push, pet snapshot
type of alarm Warning notice mobile phone APP alarm push，
alarm song
rouse wake up the way PIR body induction and remote
active awakening
recording
Video mode alarm trigger, manual recording
video storage cloud storage，local Micro SD
card，mobile phone storage
indicator light LED indicate RGB trichromatic light, power/network signal/function
indicator
battery
capacity 5200mAh/6700mAh（optional）
detachability no
hours of use 6 months（Record 20 10s videos
per day)
stand-by time 12months
charging voltage DV 5V+-5%/1.5A

SHENZHEN RISE ELECTRONIC CO., LTD.
Website: http://www.ideacamera.com Email:[e-mail]
Global Sources HomepageAddress: http://www.globalsources.com/ideacamera.co
charging time 8 hours
protected mod over current/over discharge/over
charge/short circuit/high and low
temperature charge protection
power dissipation
stand-by power
consumption 1.68mW(4V 0.42mA）
daytime power
consumption 1W((3.8V 264mA）
power consumption at
night 2.17W((3.8V 571mA）
interface
power 1个Micro USB port
sd card 1个Micro SD card（max support
128GB)
key 1 reset，1 power on
installation installation 1/4 universal screw hole and
magnetic suction
environment
dustproof and
waterproof IP65
working environment -10° ~ 45°C /10% ~ 80% (no
condensation)
storage environment -20°C ~ 60° /0% ~ 90% (no
condensation)
specification
size (LxWxH) 70mm*50mm*90mm(excluding
stents）
weight(bare）240g
finished weight 500g
material & process ABS+PC

SHENZHEN RISE ELECTRONIC CO., LTD.
Website: http://www.ideacamera.com Email:[e-mail]
Global Sources HomepageAddress: http://www.globalsources.com/ideacamera.co
color white highlights
authentication certificate CE, FCC, RoHS, WEEE, MSDS,
UN38.3
Packing list:
1. Camera*1
2. Bracket*1
3. 3MAdhesive tape*1
4. Mounting kit*1
5. USB charging cable *1
6. Operation instruction*1
Quick start:
The wireless smart battery camera supports battery- powered supply and AC-powered
supply.
1. Download and install theApp
The wireless smart battery camera supports Android and iOS App. For your best
experience, please scan the QR code below, or search Vicoo in theApp store to download
and install theApp, and follow the instruction to complete the user registration.
Download:Android/App Store
2. Add the device
Signinto VicooApp，connect toWi-Fiand addthedeviceaccordingtothe prompts(please
bring the device close to the router when configuring).

SHENZHEN RISE ELECTRONIC CO., LTD.
Website: http://www.ideacamera.com Email:[e-mail]
Global Sources HomepageAddress: http://www.globalsources.com/ideacamera.co
Install the camera:
You can place the camera on a shelf or other surfaces to use, or you can install it on a wall
to use.
(1) Select a good spot for your camera
Please install the camera in a position where its view is not blocked and ensure that it is
within the coverage of the Wi-Fi network.
(2) Install the bracket
1) 3M adhesive fixing:
Remove the protective film on one side of the 3M adhesive and stick it to the mounting
surface of the bracket.Then remove the protective film on the other side to fix the mounting
bracket in the installation position. (The installation surface must be clean, smooth and dry.
It is not suitable for uneven wood, leather and stucco walls. Please press and hold the
bracket on the installation position for 3 minutes to achieve the best gluing performance)
2) Screw fixing:
Use the drilling tool to punch holes on the wall according to the hole distance of the base.
It is recommended to mark the holes on the wall with a pencil before drilling. Screw the

SHENZHEN RISE ELECTRONIC CO., LTD.
Website: http://www.ideacamera.com Email:[e-mail]
Global Sources HomepageAddress: http://www.globalsources.com/ideacamera.co
expansion nut into the holes on the wall, and then connect the bracket to the expansion
nut with screws to complete the fixing.
(3) Fix the camera
Insert the ball-type connection shaft into the rear of the camera.
(4) Adjust the angle
Adjust the camera to an appropriate angle, and then tighten the base by rotating it in
clockwise direction to fix the angle.
Power on/off and network configuration:
Long press the power button for 2s to power on/off the device.

SHENZHEN RISE ELECTRONIC CO., LTD.
Website: http://www.ideacamera.com Email:[e-mail]
Global Sources HomepageAddress: http://www.globalsources.com/ideacamera.co
Double click the power button to enter the network configuration mode after the prompt
tone.
When connecting the camera for the first time, use the VicooApp and follow theinstruction
to configure the camera network.
Set up the camera:
1) Click the “Add Device” in the App and enter the Wi-Fi network name and password
that you want the camera to connect.
To ensure a longer distance connection, the camera only supports the 2.4Ghz Wi-Fi with
stronger wall penetration capability and does not support Wi-Fi for enterprise- level
authentication currently. Please ensure that the entered Wi-Fi meets the requirements.
After completion, click “Continue” to generate the QR code for pairing the camera.

SHENZHEN RISE ELECTRONIC CO., LTD.
Website: http://www.ideacamera.com Email:[e-mail]
Global Sources HomepageAddress: http://www.globalsources.com/ideacamera.co
2) After pressing the camera switch for 3 seconds, the camera will turn on.At this
moment, target the camera at the QR code of the mobile App, with a distance of
about 20cm (about 7 inches) until the camera emits a “Di” sound, which represents
the scanning is succeeded and the pairing is started.
Power button

SHENZHEN RISE ELECTRONIC CO., LTD.
Website: http://www.ideacamera.com Email:[e-mail]
Global Sources HomepageAddress: http://www.globalsources.com/ideacamera.co
3) After a while, the camera will give out a prompt sound of successful connection. At
this moment, please set the name for the device on the App and select the location
you want to place the device. Click “Continue” to complete the pairing.
about 7 inchs (20cm)

SHENZHEN RISE ELECTRONIC CO., LTD.
Website: http://www.ideacamera.com Email:[e-mail]
Global Sources HomepageAddress: http://www.globalsources.com/ideacamera.co
Possible problems with binding:
When you hear the “Wi-Fi Password Error”, please check whether the Wi-Fi password
you entered in the App is correct;
When you hear the “Authentication error”, please ensure that your Wi-Fi network is not
an enterprise-level network connection mode, and the device supports only the network
with the security level below WPA-2;
When you hear the “Wi-Fi not found”, please check whether you select or enter the
correct Wi-Fi name, place the device near the Wi-Fi router and ensure that the router is
powered on; please note that 5Ghz Wi-Fi cannot be searched by the device;
When you hear the “retrieving IP timeout”, it indicates that the number of devices
connected to the router in your home is too excessive to connect more devices. Please
remove some of the connected devices that are not commonly used or restart the router
to clear the unconnected devices whose lease has expired. You may need to contact the
router administrator;
When you hear the “Cloud service connection fail”, please check whether your router is
connected properly to the external network, and it is common that the network
disconnection or the selected router in your home is a local area network server. Please
ensure that the network connection is normal, and try to temporarily turn off the firewall to
connect again.
Share the camera:
When you need to view the camera with other family members or friends, you can use
this function. Only the administrator users who are bound with the camera for the first
time can share and set the device. Other members can only view the live or playback
function of the device.
1) Find the camera you want to share in the App homepage or camera setting page.
Find the button and enter the sharing page

SHENZHEN RISE ELECTRONIC CO., LTD.
Website: http://www.ideacamera.com Email:[e-mail]
Global Sources HomepageAddress: http://www.globalsources.com/ideacamera.co
2) Click “Invite”, and a QR code will be generated for sharing.
3) For the members you need to share, find “Add a Friend’s Camera” in the “User”
page to enter the scanning page.
4) Scan the QR code on your mobile phone, and you will receive the confirmation
notification after success. The sharing will be completed after you agree.

SHENZHEN RISE ELECTRONIC CO., LTD.
Website: http://www.ideacamera.com Email:[e-mail]
Global Sources HomepageAddress: http://www.globalsources.com/ideacamera.co
Charge the camera:
Vicoo App will remind you to charge your camera when the battery is low. Please use the
Micro-USB cable to plug into the 5V/1.5A charging adapter to charge the camera. During
charging, the camera's indicator light is solid yellow, and when the camera is fully
charged, the indicator light will turn into solid green. It will take 8 hours to fully charge the
camera.
When the battery is too low, the indicator light will blink red quickly, with the voice
prompting "low battery, shutting down". If the charger is not connected, the camera will
power off automatically.
Firmware upgrade:
When you connect your camera through the VicooApp, it will prompt you if the latest
firmware is available. You can also manually check the firmware upgrade in the settings
of the App.
Please make sure that your camera is fully charged or connected to the power adapter
before upgrading the firmware, please do not cut off the power supply during the
upgrading.
FCC warning:
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:

SHENZHEN RISE ELECTRONIC CO., LTD.
Website: http://www.ideacamera.com Email:[e-mail]
Global Sources HomepageAddress: http://www.globalsources.com/ideacamera.co
(1) this device may not cause harmful interference
(2) this device must accept any interference received, including interference that may
cause undesired operation. Any changes or modify not expressly approved by the
party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be
installed and operated with minimum distance between 20cm the radiator your body: Use
only the supplied antenna.
FAQ:
1. Q: Camera permission management: How to invite family and friends to use
my camera together?
A: Open the VicooApp and select your camera in the home page. Click the share button
on the home page or the "Share" in the camera settings to enter the sharing page, and
then click "Invite friends" to generate a QR code. Your friends can now get some of the
access rights by scanning the QR code in your phone.
2. Q: Why doesn't the Wi-Fi name appear when I connect to Wi-Fi?
A: On Apple devices with iOS13 and above, you need to turn on the "location permission"
for the app in the system settings and change it to "allow when using."
3. Q: Will the camera show red lights when night vision is activated?
A: The built-in infrared lamp beads make the camera only show some dim red lights
when night vision is activated, but the image quality is still clear under no light
environment.

SHENZHEN RISE ELECTRONIC CO., LTD.
Website: http://www.ideacamera.com Email:[e-mail]
Global Sources HomepageAddress: http://www.globalsources.com/ideacamera.co
4. Q: What are the requirements for Wi-Fi?
A: Please use a 2.4GHz wireless network. The device does not support the 5GHz
wireless network. Meanwhile, please set the Wi-Fi authentication method to WPA2-PSK
or other lower level of security method.A password is required.
5. Q: How far should the camera be placed from the router?
A: After testing, the Wi-Fi connection distance can normally reach up to 150 meters in the
open area. However, the actual situation depends on the strength of Wi-Fi and its
surrounding environment (thick walls, electromagnetic devices, large metal objects will all
cause interference to the Wi-Fi signals). If the camera connection signal is weak or
unstable, please place the camera as close to the router as possible.
6. Q: What is the maximum length of recording time?
A: You can choose the recording time in the app. The camera can record for a fixed time
or “auto” mode, which depending on whether there is a person. The maximum length of a
video is 3 minutes.
7. Q: How to quickly view videos by category?
A: Click the icon in the upper left corner of the "Library" page to start the search filters.
Select the search settings and then click save to view the video playback.
8. Q: What should I do when the device is in malfunction?
A: Long press the power button to restart the camera. If there is no response, you can
open the back shell of the camera, and then open the rubber plug on the side then press
the reset button with a pointed object to force the power off, then long press the power
button to restart the camera.