Idea-fly 390000020 User manual

Two axis brushless gimbal ASSEMBLY SECTION
两轴无刷云台 安装说明
Screw M3*5
Apollo安装孔位
installation position
Screw M2*4
减震球Shock
absorption ball
Screw M2*5
Screw M2.5*6
电机Motor
M3螺母
M3 Screw cap
Screw M3
Gopro 3&Gopro 2
俯仰臂摆动角度为180°
Pitch angle 180°
横滚臂摆动角度为90°
Roll angle 90°
Instruction 2
工作电压
Working voltage:12V
重量Weight:155g
(without Gopro)
Phantom1安装孔位
installation position
IFLY-4&IFLY-4S
distribution board
Apollo&Phantom1
distribution board
Instruction 1
配件清单packing list
云台 gimbal*1
M3螺母 screw cap*4
M2*4 screw*8
USB线cable*1
说明书manual*1
The standard packing list doesn't include distribution board for Apollo&Phantom1.
Standard packing
选配转接板：
Optional board
(Apollo&Phantom1)
Distribution board*1
M2*4 screw*4
M2*5 screw*4
M3*5 screw*4

Power port 电源接
Note: "GND" side connect to
black cable of serial port
注意:"GND" 接串口的黑色线端
USB port 调参线接口
RC-Pitch 5V
RC-Roll 5V
FC-Pitch 5V
FC-Roll 5V
PS: A0, A1,A2,A3 are used for remote control. A0, A1, A2, A3只适用于遥控器控制云台。

°
安装孔位
position