Idea RS-BASSO-L Instruction Manual

RS-BASSO-L
Rigging Accessory
Technical
Data Sheet

Technical Data Sheet- 2 -
Overview
Technical Data
Technical Drawings
Construction Weatherized steel
Dimensions 600 x 74 x 12 mm (front) / 600 x 176 x 12 mm (rear).
Weight 4.2 kg
Compatible models BASSO18, BASSO18-A, BASSO21, BASSO21-A, BASSO21t, BASSO36t, BASSO36t-A.
This four-piece optional kit can be screwed to both sides of BASSO subwoofers and lock the cabinet into the array for both own
and stacked congurations. The hardware’s integrated locking points allow for secure, quick setup operation and deployment of the
system. RS BASSO L allows for both own and stacked cogurations (along with RF 600 and additional Stack accessories).
IMPORTANT Safety and Warranty notice
This rigging equipment has been designed and constructed to be used exclusively with IDEA Line-Array models BASSO18, BAS-
SO18-A, BASSO21, BASSO21-A, BASSO21t, BASSO36t, BASSO36t-A.
!
600 mm
74 mm 176 mm

I MÁS D ELECTROACÚSTICA SL
Pol. A Trabe 19-20, 15350 – Cedeira, A Coruña (España)
Tel. [phone]
www.ideaproaudio.com
[email protected]
Specications and product appearance may be subject to change without notice.
TD_RS-BASSO-L_EN_v2.0 | 12 - 2022