Idis DA-CM1100 User manual

This manual is intended for users of the DA-CM1100 ceiling mounting
bracket. It includes instructions for mounting the DA-CM1100 ceiling
mounting bracket to a ceiling.
•This bracket is intended to be used with DC-D series
model of camera. Do not use it with other models of
cameras.
•This installation should be performed by a qualified
service personnel in conformance to all local codes.
•You may need to reinforce the ceiling. If the ceiling is not
strong enough to support the camera, the camera may
fall.
•Do not use this product for other purposes.
Mounting
Mount the bracket to the ceiling as follows:
1 Insert cables from external devices, network and
power adapter through the hole of bracket.
2 Mount bracket to the ceiling by using the anchors
and screws.
Bracket
3
Screw the plate to bracket by using the screws.
Plate
Bracket
DA-CM1100 INSTALLATION MANUAL

IDIS Co., Ltd.
For more information, please visit www.idisglobal.com
Connect your camera to the bracket as follows:
4 Screw the camera bottom cover onto the plate.
5 Connect the camera dome cover onto the camera
bottom cover.
6 Turn on power.
Plate
Camera
Bottom
Cover
Camera
Dome
Cover
Dimensions
Unit: mm (inch)
120 (4.72)
5 (0.20)
20.5 (0.81)
341 (13.43)
45.5
(1.79)
3- 10.5 (0.41)
46 (1.81)
83.5
(3.28)
4-M3
38
(1.50)
59
(2.32)
Ver.1.0