iGenix IG4018 & IG4030 User manual

Please read these instructions carefully before use and retain for future reference
Before switching on you appliance
Always check for any damage which may have been caused in transit
Catering Urn
IG4008, IG4015, IG4018 & IG4030
For models:
USER MANUAL

2
CONTENTS
Important Safety Instructions...................................................3
Specications................................................................................4
Appliance Overview...................................................................4
Operating Instructions...............................................................5
Cleaning and Maintenance ........................................................6
Fuse Replacement.......................................................................6
Trouble Shooting Guide.............................................................7
Disposal Information..................................................................7
Terms and Conditions and Warranty Information...... 10-11

3
IMPORTANT SAFETY INSTRUCTIONS
Read and follow all of the instructions even if you feel you are
familiar with the product, and nd a place to keep this manual handy
for future reference.
Important: When using electrical appliances, basic safety
precautions should always be followed:
• Do not operate the appliance with a damaged cord or plug,
after it malfunctions or has been dropped or damaged in
any way. All electrical repairs must be carried out by a qualied
electrician. Inadequate repairs may result in a major source of
danger for the user and invalidate the warranty.
• Check the voltage of the appliance matches the household
voltage, which is located on the rating label.
• Do not immerse the appliance in water or any other liquids.
• Never leave the appliance unattended whilst in use.
• Be careful of hot steam coming from the vent in the
appliances lid.
• This should only be used by adults
• Cleaning and user maintenance shall not be made by children
• Keep the appliance and its cord out of reach of children.
• Children shall not play with the appliance.
• Appliances cannot be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the
hazards involved.
• Always unplug the appliance before attempting to move.
• Always unplug the appliance before cleaning.
• When disconnecting from the electricity supply, pull the plug,
not the cord.
• This product is for indoor use only.

4
APPLIANCE OVERVIEW
IG4008 IG4015 IG4018 IG4030
SPECIFICATIONS
Product Capacity (Litres) Wattage Voltage
IG4008 8.8 900-1000 220 – 240V ~ 50/60Hz
IG4015 15 1500-1800 220 – 240V ~ 50/60Hz
IG4018 18 2100-2600 220 – 240V ~ 50/60Hz
IG4030 30 2500-3000 220 – 240V ~ 50/60Hz
1. Lid knob
2. Lid
3. Cool- touch handles
4. Max line
5. Water gauge
6. On/ Off switch
7. Reset button
8. Keep warm light
9. Heating light
10. Water tap
11. Adjustable thermostat

5
OPERATING INSTRUCTIONS
Before use clean the appliance with warm water. Fill the urn to the maximum capacity, indicated on the
water level indicator, allow to boil, once cooled discard the water and rinse out, this process should be
repeated several times to remove dust and residue before use.
1. Turn the lid anti-clockwise to open.
2. Fill the appliance with the required amount of water ensuring that the level is between the “MAX”
and “MIN” marks.
3. Replace the lid and turn clockwise to lock into place.
4. Set the thermostat dial to 100°C.
5. Plug the appliance into the electrical supply and switch the appliance on by pushing the ON/OFF
button, the red indicator light will illuminate and the appliance will begin to heat the water. Once
water has reached the preset temperature, the red indicator will go off and the orange indicator will
illuminate to indicate that the appliance will go into keep warm function.
6. Adjust the thermostat dial to a lower temperatures if required. Please note that if left at 100°C the
urn will continue to boil and thermal cut-out will activate, if the water is left to boild dry.
7. Check the water gauge during use for the water level. Add more water if required and repeat
from ‘Step 4’
8. Use the tap to dispense water.
9. When nished empty water, switch appliance off and disconnect from the electricity supply.
Safety Cut Out
The appliance features a safety cut out switch, this will protect the element if the water level becomes
too low.
• To reset the safety cut out, switch off the appliance and unplug from the electricity supply and allow
the appliance to cool down.
• Once cold, empty the water out and press the reset button located on the bottom of the appliance.
• Rell with cold water and plug into the electricity supply, the appliance is now ready to be switched
back on again.

6
CLEANING AND MAINTENANCE
Descaling
If allowed to build-up, limescale can cause the element to overheat and can cause the tap to stop working
correctly. Regular checks need to be made of the inside of the appliance for signs of limescale. It is
important that limescale deposits are removed by using descaling tablets, powders or liquids. If you are in
a hard water area, the appliance may need to be descaled every week. If you are in a soft water area then
descaling the appliance will not need to be carried out so often.
Exterior
Use a clean, damp soft cloth to wipe the exterior surface of the appliance and dry thoroughly.
Important: Do not use abrasive cloths, powders, household cleaners, bleach or wax polish to clean the
appliance as these can lea smell in the appliance and can damage the exterior.
Important: If tap begins to not ow correctly, clean and descale with citric acid or vinegar to remove
limescale deposits.
Fuse Cover
Fuse Replacement (Class I)
This appliance must be eathed. Remove the fuse cover with a small
at head screw driver. Take out the fuse and replace with a new fuse
of the same Amp. Replace the fuse cover and push back into place.
MAINS PLUG FUSE REPLACEMENT

7
TROUBLE SHOOTING
Please refer to the trouble shooting guide when experiencing an issue with your heater. If you still cannot
determine the fault then please call our Customer Services number 01473 271272
Problem Possible Cause Solution
The appliance does
not work or not
heating water.
1. Not properly plugged into the
electricity supply.
2. No power.
3. On/Off switch not turned on.
4. Safety cut-out activated
1. Plug in rmly.
2. Check fuse or breaker.
3. Push On/Off switch to on.
4. Empty the urn and allow to cool for
30 minutes. Press the reset button
on the base of the appliance and rell
with water.
1. Large build-up of scale in the
appliance.
2.Appliance overheated and
activated the thermal cut out.
The appliance cuts
out before it boils.
1. Use a descaling agent to clean
the appliance.
2. Empty the urn and allow to cool for
30 minutes. Press the reset button
on the base of the appliance and rell
with water.
Appliance scales
up quickly
1.You live in a hard water area. 1. Regularly descale the appliance.
Tap is leaking 1. Limescale build up. 1. Regularly descale your appliance
to prevent limescale affecting the
appliance.
Spare taps can be purchased at
www.igenix.co.uk
DISPOSAL INFORMATION
The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment
(WEEE), requires that old household electrical appliances must not be disposed of in
normal unsorted municipal waste.
Old appliances must be collected separately in order to optimise the recovery and
recycling of the materials they contain and reduce the impact on human health and the
environment.
The crossed out “wheeled bin” symbol on the product reminds you of your obligation,
that when you dispose of the appliance it must be separately collected. Consumers
should contact their local authority or retailer for information concerning the correct
disposal of their old appliance.

8
lgenix Warranty Terms & Conditions
This product is guaranteed for a period of 12 months as standard from the date of purchase
against mechanical and electrical defects. You can extend your warranty for a further 12 months by
registering your product.
Upon registration we will cover your product for a period of 24 months from the original purchase
date against any mechanical or electrical defects.
To qualify for the guarantee, the product must be used for domestic household use only and in
accordance with the instructions in the user manual.Any misuse of the product will result in the
warranty being void.
The guarantee does not cover accidental damage, misuse, neglect, tampering or incorrect
adjustment or installation.
The guarantee will be rendered invalid if the product is resold, has had its serial number removed
(or has an invalid serial number), or if an unauthorised person has carried out any repairs or
alterations.
The warranty does not cover accessories or consumable parts that require replacement under
normal use. This includes shelving, dials, lters, belts and trays etc.
In the unlikely event of a breakdown please refer to the Troubleshooting guide in your user manual
and check all plugs, fuses and the electricity supply.
If you still require assistance please contact our Customer Service department on
01473 271 272 or write to us at the following address:
Customer Service Department
38 Bluestem Road, Ransomes Europark
Ipswich, IP3 9RR
Please quote the Product Code which begins ‘IG’ or ‘DF’ and the Batch Coder beginning ‘5’ and give
details of the exact fault. We will then decide whether to repair or replace the item.
Before we arrange the repair or replacement you will be required to return a copy of your proof
of purchase. Please retain your original.
If an item is replaced within the agreed guarantee period, the guarantee for the replacement item
will be calculated from the purchase date of the original.
In the event that the product is inspected and no fault is found or the product is not within the
guarantee period you will be charged for the repair and any carriage costs.

9
Thank you for choosing lgenix
As a valued customer we would like to offer you a FREE 2 year warranty to cover your product
against any electrical or mechanical defects.
This means that in the unlikely event you develop a fault or problem with your product we will
happily repair or replace the item free of charge.
To qualify for the 2 year warranty you must register your product within 30 days of purchase.The
full Terms & Conditions of our warranty policy are shown on the opposite page.They are also
available on our website. www.igenix.co.uk
To register your product, please complete all sections of the form below and return to us at the
following address: lgenix, 38 Bluestem Road, Ransomes Europark, Ipswich, IP3 9RR.
Alternatively you can visit the lgenix website and complete the form online.
Customer Details:
Title: First Name Surname:
Address:
Post Code:
Email:
Telephone:
Product Information:
Product Code (Beginning IG or DF): Product Description:
Batch Number (Beginning 5): Serial Number (If applicable):
Date of Purchase:
Retailer Name:
Retailer Location:
Please tick here to conrm you have read and accept our Terms & Conditions
Please tick here if you DO NOT wish to receive marketing information from us
Customer Signature: Date:

10

11

38 Bluestem Road, Ransomes Europark, Ipswich, IP3 9RR
Tel. [phone]
Disclaimer: Igenix operate a policy of continual improvement and development.
We therefore reserve the right to change/alter the specication and appearance of our appliances without prior notice.
All diagrams and images shown in this manual are for illustration purposes only.