iHome iAVS16 User manual
Front CoverBack Cover
Inside page Inside page
Model: iAVS16
Quick Start Guide
•iAVS16
•Power adapter
iAVS16 - QSG (English)
Size: 280 x 160 mm (unfold), 140 x 160 mm (folded)
Color: 4C + 3C
Material: 260gsm white Art Card
Jun. 23, 2017
Contact Us: 1•800•288•2792For full warranty and full instructions visit: www.ihome.com/support
FCC Information
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
Canada Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:
(1)
This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes :
(1)
l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
le dispositif a été évalué à satisfaire l'exigence générale de l'exposition aux rf.
l'appareil peut être utilisé dans des conditions d'exposition portatif sans restriction.
Printed in ChinaiAVS16-062317-A
Model: iAVS16
Sleep Button
Configure your Sleep preferences
in the iHome AVS app
Call Answer/End Button
Press to answer and end
Bluetooth calls
Mute Button
Press to mute microphone
Bluetooth Button
Press to enter Bluetooth
mode to pair devices
Volume Buttons
Press to adjust volume levels
up or down
Smart Buttons
Configure your smart
button preferences in
the iHome AVS app
Play/Pause Button
Press to play/pause audio
Lighting Button
Press to change lighting modes
Alexa Button
The iAVS16 features far field
voice recognition. Alexa can
also be triggered by tapping
the Alexa Button. Download
Alexa App for more features.
USB Port (back of unit)
While unit is connected to AC power,
connect USB cable to charge devices
Track Buttons
Press to skip to next
or previous track
Snooze/Display Dimmer Button
Download the iHome AVS app from
the App Store or Google Play.
Follow in-app instructions for account
setup and to establish your speaker’s
Wi-Fi connection.
Connect your Amazon account to enjoy
the Alexa voice capability of your iAVS16.
Connect power adapter into DC jack on back
of unit and plug into working wall outlet.
Setup Overview Controls
1
2
3
4
usbcharging
DC 9V3A
What you’ll need:
•Wi-Fi network transmitting at 2.4GHz
•Apple device running iOS 9.3 or later or Android device running
KitKat 4.4 or later connected to your preferred Wi-Fi network
Explore the app to:
Set Sleep Preferences
Control Color Modes
Configure Smart Buttons
and more!
What’s in the box:
www.ihome.com
1•800•288•2792
Questions?
RESET
RESET
TEST
TEST
Bluetooth Bedside/Home Oce Stereo Speaker System with Far Field Voice
Front CoverBack Cover
Inside page Inside page
Model: iAVS16
Quick Start Guide
•iAVS16
•Power adapter
iAVS16 - QSG (English)
Size: 280 x 160 mm (unfold), 140 x 160 mm (folded)
Color: 4C + 3C
Material: 260gsm white Art Card
Jun. 23, 2017
Contact Us: 1•800•288•2792For full warranty and full instructions visit: www.ihome.com/support
FCC Information
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
Canada Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:
(1)
This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes :
(1)
l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
le dispositif a été évalué à satisfaire l'exigence générale de l'exposition aux rf.
l'appareil peut être utilisé dans des conditions d'exposition portatif sans restriction.
Printed in ChinaiAVS16-062317-A
Model: iAVS16
Sleep Button
Configure your Sleep preferences
in the iHome AVS app
Call Answer/End Button
Press to answer and end
Bluetooth calls
Mute Button
Press to mute microphone
Bluetooth Button
Press to enter Bluetooth
mode to pair devices
Volume Buttons
Press to adjust volume levels
up or down
Smart Buttons
Configure your smart
button preferences in
the iHome AVS app
Play/Pause Button
Press to play/pause audio
Lighting Button
Press to change lighting modes
Alexa Button
The iAVS16 features far field
voice recognition. Alexa can
also be triggered by tapping
the Alexa Button. Download
Alexa App for more features.
USB Port (back of unit)
While unit is connected to AC power,
connect USB cable to charge devices
Track Buttons
Press to skip to next
or previous track
Snooze/Display Dimmer Button
Download the iHome AVS app from
the App Store or Google Play.
Follow in-app instructions for account
setup and to establish your speaker’s
Wi-Fi connection.
Connect your Amazon account to enjoy
the Alexa voice capability of your iAVS16.
Connect power adapter into DC jack on back
of unit and plug into working wall outlet.
Setup Overview Controls
1
2
3
4
usbcharging
DC 9V3A
What you’ll need:
•Wi-Fi network transmitting at 2.4GHz
•Apple device running iOS 9.3 or later or Android device running
KitKat 4.4 or later connected to your preferred Wi-Fi network
Explore the app to:
Set Sleep Preferences
Control Color Modes
Configure Smart Buttons
and more!
What’s in the box:
www.ihome.com
1•800•288•2792
Questions?
RESET
RESET
TEST
TEST
Bluetooth Bedside/Home Oce Stereo Speaker System with Far Field Voice
Front CoverBack Cover
Inside page Inside page
Model: iAVS16
Quick Start Guide
•iAVS16
•Power adapter
iAVS16 - QSG (English)
Size: 280 x 160 mm (unfold), 140 x 160 mm (folded)
Color: 4C + 3C
Material: 260gsm white Art Card
Jun. 23, 2017
Contact Us: 1•800•288•2792For full warranty and full instructions visit: www.ihome.com/support
FCC Information
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
Canada Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:
(1)
This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes :
(1)
l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
le dispositif a été évalué à satisfaire l'exigence générale de l'exposition aux rf.
l'appareil peut être utilisé dans des conditions d'exposition portatif sans restriction.
Printed in ChinaiAVS16-062317-A
Model: iAVS16
Sleep Button
Configure your Sleep preferences
in the iHome AVS app
Call Answer/End Button
Press to answer and end
Bluetooth calls
Mute Button
Press to mute microphone
Bluetooth Button
Press to enter Bluetooth
mode to pair devices
Volume Buttons
Press to adjust volume levels
up or down
Smart Buttons
Configure your smart
button preferences in
the iHome AVS app
Play/Pause Button
Press to play/pause audio
Lighting Button
Press to change lighting modes
Alexa Button
The iAVS16 features far field
voice recognition. Alexa can
also be triggered by tapping
the Alexa Button. Download
Alexa App for more features.
USB Port (back of unit)
While unit is connected to AC power,
connect USB cable to charge devices
Track Buttons
Press to skip to next
or previous track
Snooze/Display Dimmer Button
Download the iHome AVS app from
the App Store or Google Play.
Follow in-app instructions for account
setup and to establish your speaker’s
Wi-Fi connection.
Connect your Amazon account to enjoy
the Alexa voice capability of your iAVS16.
Connect power adapter into DC jack on back
of unit and plug into working wall outlet.
Setup Overview Controls
1
2
3
4
usbcharging
DC 9V3A
What you’ll need:
•Wi-Fi network transmitting at 2.4GHz
•Apple device running iOS 9.3 or later or Android device running
KitKat 4.4 or later connected to your preferred Wi-Fi network
Explore the app to:
Set Sleep Preferences
Control Color Modes
Configure Smart Buttons
and more!
What’s in the box:
www.ihome.com
1•800•288•2792
Questions?
RESET
RESET
TEST
TEST
Bluetooth Bedside/Home Oce Stereo Speaker System with Far Field Voice
Front CoverBack Cover
Inside page Inside page
Model: iAVS16
Quick Start Guide
•iAVS16
•Power adapter
iAVS16 - QSG (English)
Size: 280 x 160 mm (unfold), 140 x 160 mm (folded)
Color: 4C + 3C
Material: 260gsm white Art Card
Jun. 23, 2017
Contact Us: 1•800•288•2792For full warranty and full instructions visit: www.ihome.com/support
FCC Information
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
Canada Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:
(1)
This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes :
(1)
l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
le dispositif a été évalué à satisfaire l'exigence générale de l'exposition aux rf.
l'appareil peut être utilisé dans des conditions d'exposition portatif sans restriction.
Printed in ChinaiAVS16-062317-A
Model: iAVS16
Sleep Button
Configure your Sleep preferences
in the iHome AVS app
Call Answer/End Button
Press to answer and end
Bluetooth calls
Mute Button
Press to mute microphone
Bluetooth Button
Press to enter Bluetooth
mode to pair devices
Volume Buttons
Press to adjust volume levels
up or down
Smart Buttons
Configure your smart
button preferences in
the iHome AVS app
Play/Pause Button
Press to play/pause audio
Lighting Button
Press to change lighting modes
Alexa Button
The iAVS16 features far field
voice recognition. Alexa can
also be triggered by tapping
the Alexa Button. Download
Alexa App for more features.
USB Port (back of unit)
While unit is connected to AC power,
connect USB cable to charge devices
Track Buttons
Press to skip to next
or previous track
Snooze/Display Dimmer Button
Download the iHome AVS app from
the App Store or Google Play.
Follow in-app instructions for account
setup and to establish your speaker’s
Wi-Fi connection.
Connect your Amazon account to enjoy
the Alexa voice capability of your iAVS16.
Connect power adapter into DC jack on back
of unit and plug into working wall outlet.
Setup Overview Controls
1
2
3
4
usbcharging
DC 9V3A
What you’ll need:
•Wi-Fi network transmitting at 2.4GHz
•Apple device running iOS 9.3 or later or Android device running
KitKat 4.4 or later connected to your preferred Wi-Fi network
Explore the app to:
Set Sleep Preferences
Control Color Modes
Configure Smart Buttons
and more!
What’s in the box:
www.ihome.com
1•800•288•2792
Questions?
RESET
RESET
TEST
TEST
Bluetooth Bedside/Home Oce Stereo Speaker System with Far Field Voice
Other manuals for iAVS16
1
