Ikegami HDL-50 User manual

H129B083-HI1 Printed in Japan
Design and specifications are subject to change without notice.
HEADQUARTERS
WESTCOAST OFFICE
SOUTHWEST OFFICE
MIDWEST OFFICE
SOUTHEAST OFFICE
37 BROOK AVENUE, MAYWOOD, NJ 07607
Phone:[phone] F a x : [phone]
2631 MANHATTAN BEACH BLVD., REDONDO BEACH, CA 90278
Phone:[phone] Fax:[phone]
773 BEARDEN WAXAHACHIE,TX 75167 Phone:[phone] Fax:[phone]
747 CHURCH ROAD, UNIT C1, ELMHURST, IL 60126 Phone:[phone] Fax:[phone]
5200 N.W. 33RD AVENUE, SUITE 111 FORT LAUDERDALE, FL 33309 Phone:[phone] Fax: [phone]
IKEGAMI ELECTRONICS (U.S.A.), INC. URL http: //www.ikegami.com
JQA-0773
Certified
JQA-EM3888
Certified
Newly developed CMOS sensor
Next-generation digital process ASIC
( 0.18
μ m design rule )
HDTV Native Multi-format capability
All native 1080/59.94i, 1080/50i, 720/59.94p and 720/50p are
available from the camera head. Sister models, HDL-51 and
HDL-F51, support native 1080/23.98p and 1080/23.98psf format
as well.
Servo Filter
The 4-position Optical Filter Wheel is motorized with filter position
control at the remote control panel (RM-50, OCP-200, etc.).
Lower noise with Gain-up
Employing a low-noise feedback type amplifier circuit in Master
gain up, as well as, providing noise cancel circuits in all video
related boards, eliminates noticeable noise and obtains a better
signal-to-noise with high gain up.
ND Filter and Electric Color
Connrection (ECC) Filter
Employs optical 4-position ND Filter and ECC Filter
(3200K/5600K). By the combination of these filters, the camera
can handle all kinds of lighting conditions. AWB mode is
available to cover the full range of color temperature.
Image Sensor 2/3-inch, 2,500,000 pixel CMOS Sensor
Effective Picture Element 1920(H) x 1080(V)
Optical System 2/3-inch R,G,B prism optics
Lens Mount BTA-S1005B
Operating Formats 1080/59.94i, 1080/50i, 720/59.94p, 720/50p
(1080/23.98p and 1080/23.98psf:
Supported by HDL-51 and HDL-F51)
Output Signal 2ch HD-SDI
Video Signal 1ch Analog R,G,B or Y,Pb,Prselectable
Reference Signal Input Tri-level HD Sync, 0.6Vp-p or NTSC Blackburst, 0.4Vp-p
Sensitivity F8 at 2,000 lux
S/N 54dB
Horizontal Resolution 1,000TVL for 1080i Format
700TVL for 720p Format
Optical Filter 3200K, 1/4ND, 1/8ND, 1/64ND
ECC Filter 3200K, 5600K
Gain Contol 0dB, +6dB, +12dB, +18dB (+24dB, +30dB: Factroy Option)
Electric Shutter Avaialble
Operating Temperature -10˚C ~ +45˚C (+14˚F ~ +112˚F)
Operating humidity 30% ~ 90% (Non-condensing)
Power Requiremnent +12VDC (+11VDC ~ +16VDC)
Power Consumption 20W or less
Weight 1.5kg (3.09lbs)
Dimension W90 x H103 x D180mm (W3.54 x H4.06 x D7.0 inches)
Ratings / Performance
HDL-F50
The HDL-F50 is a specialized model of the HDL-50 for gimbal installation or
other special mount with restricted depth behind the lens.
Shorter depth mechanical design (80mm) for flexible installation.
2.5Mega-pixel CMOS sensor
Newly developed CMOS sensors are employed to achieve
superb picture quality.
CMOS sensors have wide dynamic
range and, in principle, no smear.
The sensors include significant
circuitry within the sensor itself,
resulting in a digital video interface
between sensor and Ikegami camera
DSP, all in a very small device with
low power consumption. The CMOS
sensor includes native progressive
and interlace modes for multi-format
HD operation.
Fully Digitized Circuits
End-to-end Digital processing has
been realized through the use of
0.18 micro meter design rule 3.3
million gate ASIC / Fully digital
stream through the camera to the
HD-SDI output assures signal
integrity, high picture quality, and
stable and reliable operation.
Rear View