Ikelite 4081.74 User manual

1. Insert Allen Hea Screw into top of Ball Mount.
2. Insert Ball Mount with Screw into Stea y Tray Mounting Hole as
shown. Gui e Pin shoul line up with Gui e Pin Hole.
3. Sli e Nylon Washer an Split Lock-washer over Allen Screw.
4. Rotate Nut onto Allen Screw clockwise an tighten with an
Open/Box En or A justable Wrench. Use Allen Wrench to keep
Allen Hea Screw from turning
while tightening.
Installation Procedure
4081.74 1-inch Ball Mount for Steady Tray
I n s t r u c t i o n M a n u a l
Ball Mount
Open/Box
En Wrench
(not included) Nut
Allen Screw
Nylon Washer
Split Lock-washer
Allen Wrench
Gui e
Pin
Gui e
Pin
Hole
Stea y Tray
Mounting Hole
Stea y Tray
(not included)
1. Insert Allen Hea Screw into top of Ball Mount.
2. Insert Ball Mount with Screw into Stea y Tray Mounting Hole as
shown. Gui e Pin shoul line up with Gui e Pin Hole.
3. Sli e Nylon Washer an Split Lock-washer over Allen Screw.
4. Rotate Nut onto Allen Screw clockwise an tighten with an
Open/Box En or A justable Wrench. Use Allen Wrench to keep
Allen Hea Screw from turning
while tightening.
Installation Procedure
4081.74 1-inch Ball Mount for Steady Tray
I n s t r u c t i o n M a n u a l
Ball Mount
Open/Box
En Wrench
(not included) Nut
Allen Screw
Nylon Washer
Split Lock-washer
Allen Wrench
Gui e
Pin
Gui e
Pin
Hole
Stea y Tray
Mounting Hole
Stea y Tray
(not included)
1. Insert Allen Hea Screw into top of Ball Mount.
2. Insert Ball Mount with Screw into Stea y Tray Mounting Hole as
shown. Gui e Pin shoul line up with Gui e Pin Hole.
3. Sli e Nylon Washer an Split Lock-washer over Allen Screw.
4. Rotate Nut onto Allen Screw clockwise an tighten with an
Open/Box En or A justable Wrench. Use Allen Wrench to keep
Allen Hea Screw from turning
while tightening.
Installation Procedure
4081.74 1-inch Ball Mount for Steady Tray
I n s t r u c t i o n M a n u a l
Ball Mount
Open/Box
En Wrench
(not included) Nut
Allen Screw
Nylon Washer
Split Lock-washer
Allen Wrench
Gui e
Pin
Gui e
Pin
Hole
Stea y Tray
Mounting Hole
Stea y Tray
(not included)
1. Insert Allen Hea Screw into top of Ball Mount.
2. Insert Ball Mount with Screw into Stea y Tray Mounting Hole as
shown. Gui e Pin shoul line up with Gui e Pin Hole.
3. Sli e Nylon Washer an Split Lock-washer over Allen Screw.
4. Rotate Nut onto Allen Screw clockwise an tighten with an
Open/Box En or A justable Wrench. Use Allen Wrench to keep
Allen Hea Screw from turning
while tightening.
Installation Procedure
4081.74 1-inch Ball Mount for Steady Tray
I n s t r u c t i o n M a n u a l
Ball Mount
Open/Box
En Wrench
(not included) Nut
Allen Screw
Nylon Washer
Split Lock-washer
Allen Wrench
Gui e
Pin
Gui e
Pin
Hole
Stea y Tray
Mounting Hole
Stea y Tray
(not included)

© 2015 Ikelite Un erwater Systems
Ikelite Under ater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
ikelite.com
© 2015 Ikelite Un erwater Systems
Ikelite Under ater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
ikelite.com
© 2015 Ikelite Un erwater Systems
Ikelite Under ater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
ikelite.com
4081.74_1-inch_ball_mount_for_stea y_tray_1-0815
© 2015 Ikelite Un erwater Systems
Ikelite Under ater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
ikelite.com
4081.74_1-inch_ball_mount_for_stea y_tray_1-0815
4081.74_1-inch_ball_mount_for_stea y_tray_1-0815 4081.74_1-inch_ball_mount_for_stea y_tray_1-0815