illuminfx SS-LT870 User manual
SS-LT870
Wireless DMX512 Transceiver
1
SS-LT870 Wireless DMX512 Transceiver SS-LT870 Wireless DMX512 Transceiver
Working Frequency: 2.4GHz
Max. Transmitted Power: 20dBm
Communication Distance: 350m
LT-870S Wireless DMX512 Transceiver
Receiver Sensitivity: -96dBm
Input/Output Signal: DMX512
Working Temperature: -30℃~55℃
Dimensions: L175×W44×H30(mm)
Package Size: L178×W56×H33(mm)
Weight (G.W): 125g
Input Voltage: 5~24Vdc
1. Technical Specs:
(weather/environment affects the actual values)
IFXs SS-LT870 wireless DMX512 transceiver transfers the standard DMX512 protocol data wirelessly. One
emitter matches one or multiple receivers when the same signal ID is being used (Supports point-to-
point, or point to multi-point communication),
The SS-LT870 is used for data transmission between a DMX lighting controller and DMX integrated LED
lighting fixtures, or between lights and lights, to replace a wired transmission. The data transmission will be
true and reliable during the transmission process.
SS-LT870 uses an automatic frequency selection function. It will automatically choose the clearest
channel to send DMX512 data when working as an emitter, and can search and match the correct
channel to receive DMX 512 data when working as a receiver.
Use the relay settings or connect to a booster antenna to further the communication distance.
dBm 78Diagram
OFF
OFF
ON
OFF
ON
OFF
High
Middle
Low ON ON
2
3. Configuration Diagram:
2. Product Size:
4.1 Dip Switch 9-10: Mode
4.2 Dip Switch 7-8: Transmission Power
4.3 Dip Switch 1-6: Signal ID
4. Dip Switch Operation:
The 10th is OFF, the 9th is ON
The 10th is ON, the 9th is OFF
SS-LT870 in receiver mode.
Self-testing mode,
Sending out the auto-generated DMX console data (170 pixels full color smooth
changing effect).
The 10th is OFF, the 9th is OFF
SS-LT870 in emitter mode.
Emitter Receiver
E.g.:
Communication between emitter and receiver will work
when the same ID is used
* 64 ID combinations in total.
www.illuminfx.com
5. Wiring Diagram:
3
5.1 One emitting SS-LT870,multiple receiving SS-LT870:
7. Warranty Agreement:
6. Attention:
6.1 The product must be installed and serviced by the qualified technician.
6.2 This product is non-waterproof. Please avoid the direct sunlight and rain. When installed outdoors
please ensure it is mounted in a water proof enclosure.
6.3 Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.
6.4 Please check if the output voltage of the LED power supply used comply with the working voltage
of the product.
6.5 Please ensure that adequate sized cable is used from the controller to the LED lights to carry the
current. Please also ensure that the cable is secured tightly in the connector.
6.6 Ensure all wire connections and polarities are correct before applying power to avoid any damages
to the LED lights.
6.7 If a fault occurs please return the product to your supplier. Do not attempt to fix this product by
yourself.
★This manual only applies to this model. illuminfx reserves the right to make changes without prior notice.
7.1 We provide lifelong technical assistance with this product:
●A 5-year warranty is given from the date of purchase. The warranty is for free repair or replacement if
cover manufacturing faults only.
● For faults beyond the 5-year warranty we reserve the right to charge for time and parts.
7.2 Warranty exclusions below:
●Any man-made damages caused from improper operation, or connecting to excess voltage and
overloading.
●The product appears to have excessive physical damage.
●Damage due to natural disasters and force majeure.
●Warranty label, fragile label and unique barcode label have been damaged.
● The product has been replaced by a brand new product.
7.3 Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
illuminfx shall not be liable for any incidental or consequential damages for breach of any
section in this warranty.
7.4 Any amendment or adjustment to this warranty must be approved in writing by illuminfx only.
4
Please install the
booster antenna
in high open place.
The communication
distance can extend
up to 1000-2000 meters
5.3 Extend the communication distance using a booster antenna.
【Attn】
5.2 SS-LT870 used to relay DMX signal over a large distance.
2019.08.01
www.illuminfx.com
SS-LT870 Wireless DMX512 Transceiver SS-LT870 Wireless DMX512 Transceiver
