ViaSat RX3000 User manual

Blackbird Ka-Band Transceiver
RX3000
Field Installation Manual
Prepared by:
Viasat, Inc.
2040 E Technology Circle
Tempe, AZ 85284
Phone: (480) 503-5500
Fax: (480) 503-5501
Viasat Proprietary
This document contains commercial information or trade secrets of Viasat, Inc., which are confidential and exempt from disclosure to the public under the Freedom
of Information Act, 5 U.S.C.552(b)(4), and unlawful disclosure thereof is a violation of the Trade Secrets Act, 18 U.S.C. 1905. Public disclosure of any such
information or trade secrets shall not be made without the written permission of Viasat, Inc. © Viasat, Inc. 2022.
This technical data is subject to the United States (U.S.) Export Administration Regulations (EAR).
Diversion contrary to U.S. law is prohibited.
Viasat Document No.: 1422648
Rev. 002

NOTICES
Distribution
Viasat® Proprietary –Information, specifications, and features contained in this document are subject to change without notice and should not be
construed as a commitment by Viasat Inc. This document is proprietary to Viasat Inc. and shall be protected by a receiving party in accordance with
the terms of its contracts and agreements with Viasat Inc., covering all Viasat products.
No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the
express written permission of Viasat Inc.
The Blackbird Ka-Band Transceiver user terminal will be used to provide residential and business users high speed access to the Viasat broadband
satellite system. The user terminal consists of an Indoor Unit (IDU) and an Outdoor Unit (ODU).
Trademark
Viasat® and the Viasat logo are registered trademarks of Viasat Inc. in the United States and other countries. All other trademarks, and registered
trademarks, are the property of their respective owners.
Copyright
© Copyright 2022, Viasat Inc. All rights reserved.
Ka-Band operation provides access to Viasat’s broadband satellite system under the terms & conditions of Viasat’s spectrum license(s) held with ISED
Canada”
Publication Information
Revision
Date Released
Comments
001
See Agile
Initial Release
002
See Agile
Updated FCC Statements per D. Hunter (FCC SME) inputs
003
See Agile
Minor updates as per BV Labs request on FCC/ISED Compliance Statements
Viasat, Inc.
Corporate Headquarters
6155 El Camino Real
Carlsbad, CA 92009-1699
Phone: (760) 476-2200
Fax: (760) 929-3941
www.viasat.com
格式化: 字色彩: 紅色

Blackbird Ka-Band Transceiver RX3000
Field Installation Manual
14226481422648, Rev. 002002 Viasat Proprietary Information i
Dissemination restricted as described on cover and notices pages.
Table of Contents
SCOPE/SUMMARY ................................................................................................................................................1
OUTDOOR UNIT....................................................................................................................................................1
INDOOR UNIT .......................................................................................................................................................2
VIASAT NETWORK POWER ADAPTER PLACEMENT..................................................................................................................3
VIASAT WIRELESS GATEWAY .............................................................................................................................................3
POWER SUPPLIES FOR VIASAT WIFI GATEWAY 3 ...................................................................................................................4
CONNECTING THE ODU AND THE IDU ....................................................................................................................5
NOTES REGARDING DC POWER .............................................................................................................................5
ACCRONYMS AND ABBREVIATIONS .......................................................................................................................6
List of Figures
Figure 1: Blackbird Unit ...............................................................................................................................................................1
Figure 2: Outdoor Unit Components ...........................................................................................................................................2
Figure 3: Viasat Network Power Adapter ....................................................................................................................................3
Figure 4: Viasat Wireless Gateway...............................................................................................................................................4
Figure 5: Power Supply Adapters per Region ..............................................................................................................................4
Figure 6: Assembled and Installed ODU and IDU.........................................................................................................................5

Blackbird Ka-Band Transceiver RX3000
Field Installation Manual
14226481422648, Rev. 002002 Viasat Proprietary Information ii
Dissemination restricted as described on cover and notices pages.
FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.
Industry Canada Interference Statement
This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage
préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de
provoquer un fonctionnement indésirable.
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with greater than 20 cm between the radiator and your body.
Déclaration td'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement
non contrôlé. Cet équipement doit être installé et utilisé à plus de 20 cm entre le radiateur et votre corps.

Blackbird Ka-Band Transceiver RX3000
Field Installation Manual
14226481422648, Rev. 002002 Viasat Proprietary Information iii
Dissemination restricted as described on cover and notices pages.
Brazil Interference Statement:
This equipment is not intended to protection against harmful interference and cannot cause interference to
properly authorized systems. For more information, consult the ANATEL site –www.anatel.gov.br
Declaração de interferência do Brasil :
Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência
em sistemas devidamente autorizados. Para maiores informações, consulte o site da ANATEL –
www.anatel.gov.br
Mexico Interference Statement:
The operation of this equipment is subject to the following two conditions: 1) it is possible that this equipment
or device does not cause harmful interference and 2) this equipment must accept any interference, including
that which may cause its unwanted operation.
La operacion de este equipo esta sujeta a las siguientes dos condiciones: 1) es posible que este equipo o
dispositivo no cause interferencia perjudicial y 2) este equipo debe aceptar cualquier interferencia, incluyendo la
que pueda causar su operacion no deseada.

Blackbird Ka-Band Transceiver RX3000
Field Installation Manual
14226481422648, Rev. 002002 Viasat Proprietary Information iv
Dissemination restricted as described on cover and notices pages.
ADDITIONAL
FEDERAL COMMUNICATION COMMISSION STATEMENT FOR OUTDOOR UNIT (ODU)
This device complies with Part 25 of the FCC Rules. Operation is subject to the limitations and conditions of
Viasat’s FCC license(s).
In addition to compliance with Part 25 of the FCC rules, this equipment has also been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
Radiation Exposure Statement:
The ODU equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
When operating the equipment during the antenna alignment process or at any other time while performing
maintenance, take care to avoid placing body parts between the antenna feed and the reflector or in the path of
the transmitted signal in front of the antenna.
The ODU equipment is designed with safeguards to disable transmission if blockage is detected, but good
practice is to avoid placing anything in the path of the transmitted signal.

Blackbird Ka-Band Transceiver RX3000
Field Installation Manual
14226481422648, Rev. 002002 Viasat Proprietary Information 1
Dissemination restricted as described on cover and notices pages.
SCOPE/SUMMARY
The Ground Terminal will be used to provide residential and business customers high speed internet access via
the ViaSat-3 Broadband Satellite System. The Ground Terminal consists of an Indoor Unit (IDU) and an Outdoor
Unit (ODU). The Blackbird Transceiver is a component of the ODU.
This document defines the installation for the Blackbird Transceiver used in the Outdoor Unit (ODU) for the
ViaSat-3 (VS3) Satellite Service network. The Blackbird ODU is the RX3000 Model family of VS3 ODU’s and
includes top-level part numbers of RX3110N-xxx (new production units) or RX3110R-xxx (repaired/refurbished
units), where “xxx” can be alpha or numeric characters.
This manual is a job aid intended for field installation technicians.
OUTDOOR UNIT
The Outdoor Unit (ODU) is located outside the customer’s home or facility.
The Ka Antenna receives and transmits the Radio Frequency (RF) signals from and to the satellite, while
supporting the connection to the Indoor Unit (IDU) via IFL cable. Figure 1 details the Blackbird Unit and Figure 2
shows the four components of the outdoor unit.
The ODU Operating Environment is as follows:
Temperature: -40°C to +47°C with a max wind of 4 m/s and a solar radiation of 1120 W/m2
Humidity: 0% to 100%
Altitude: 4300 m (max)
This model has four main components:
1. Reflector
2. Back Bracket Assembly (Azimuth/Elevation-AZ/EL)
3. Blackbird
The reflector boom arm attaches directly to the base of
the Blackbird unit and does not require a bracket.
The Blackbird is 8.27 in x 5.89 in (21 x 15 cm).
4. Boom Arm
The boom allows the Blackbird cables to be threaded inside
the arm
Figure 1: Blackbird Unit

Blackbird Ka-Band Transceiver RX3000
Field Installation Manual
14226481422648, Rev. 002002 Viasat Proprietary Information 2
Dissemination restricted as described on cover and notices pages.
Figure 2: Outdoor Unit Components
Pointing and peaking these models uses a Bluetooth-based Point and Peak Process provided with the Blackbird
(TRIA 3). This process uses the Viasat Tech Tools (VTT) mobile app.
INDOOR UNIT
The Indoor Unit (IDU) is located inside the customer’s home or facility.
In total, there cannot be more than 150 feet (45 meters) of coaxial cable (COAX) between the gateway and the
TRIA.
The Indoor Unit has three main components:
1. Viasat Network Power Adapter (Figure 3)
2. Viasat WiFi Gateway 3 (Figure 4)
3. Viasat WiFi Gateway 3 Power Supply (Figure 5)

Blackbird Ka-Band Transceiver RX3000
Field Installation Manual
14226481422648, Rev. 002002 Viasat Proprietary Information 3
Dissemination restricted as described on cover and notices pages.
Viasat Network Power Adapter Placement
When placing the Viasat Network Power Adapter (VNA), (Figure 3) ensure the following:
The power adapter must be placed horizontally on its feet or mounted vertically on a wall.
No more than 150 feet (45 meters) of COAX cable between the Viasat Network Power Adapter (VNA)
and the TRIA.
The VNA must be within 6 feet (1.8m) of a power outlet.
Keep the VNA away from heat, liquid, and magnetic interference.
The VNA must have 1 inch (2.5 cm) of clearance from the front and sides for airflow.
Figure 3: Viasat Network Power Adapter
Viasat Wireless Gateway
When installing the Viasat Wireless Gateway, ensure the following:
The gateway must be installed vertically on its feet.
The gateway must have 1 inch (2.5 cm) of clearance around the front and sides of the unit to allow
airflow.
The gateway must be within 5 feet (1.5 meter) of a power outlet.
The Ethernet cable provided with the gateway needs to be connected to the Viasat Network Power
Adapter (VNA).
Keep the gateway away from heat, liquid and magnetic interference.
The gateway must have at least 3.75 inches (9.5 cm) of clearance from the back for proper cabling.

Blackbird Ka-Band Transceiver RX3000
Field Installation Manual
14226481422648, Rev. 002002 Viasat Proprietary Information 4
Dissemination restricted as described on cover and notices pages.
Figure 4: Viasat Wireless Gateway
Power Supplies for Viasat WiFi Gateway 3
Figure 5 shows the Power Supply adapters for the Viasat WiFi Gateway 3 for different regions.
Figure 5: Power Supply Adapters per Region

Blackbird Ka-Band Transceiver RX3000
Field Installation Manual
14226481422648, Rev. 002002 Viasat Proprietary Information 5
Dissemination restricted as described on cover and notices pages.
CONNECTING THE ODU AND THE IDU
Once assembled and installed, the ODU will run the COAX cable into the interior of the structure.
The COAX cable will connect to the VNA.
An Ethernet cable will connect the VNA WAN port to the WAN port in the Viasat Wireless Gateway 3.
The VNA must then be plugged into a wall outlet and have its switch turned to ON.
The Viasat Wireless Gateway 3 will then need to be plugged into a wall outlet.
Figure 6: Assembled and Installed ODU and IDU
NOTES REGARDING DC POWER
1. Input power to the ODU is between 40 V dc < V < 50 V dc with a max current < 2 A.
2. The input power operates at two discrete levels. During startup, a default level of 30 V nominal is used
for initial power on.
3. During installation the IDU power will be off, and there will be no DC voltage on the COAX. If the IDU is
inadvertently powered on during installation, the lower level 30 V will be maintained as the nominal
voltage until the COAX cable is connected to the IDU.
4. The COAX cable will switch to 50 V nominal only after the RG-6 COAX connects the ODU to the IDU,
and after the ODU/IDU establish communication.

Blackbird Ka-Band Transceiver RX3000
Field Installation Manual
14226481422648, Rev. 002002 Viasat Proprietary Information 6
Dissemination restricted as described on cover and notices pages.
ACCRONYMS AND ABBREVIATIONS
Acronyms and Abbreviations
- C -
COAX..........................Coaxial Cable
- D -
DC ..............................Direct Current
- I -
IDU.............................Indoor Unit
IFL...............................Interfacility Link
- L -
LED.............................Light Emitting Diode
- O -
ODU ...........................Outdoor Unit
- R -
RF...............................Radio Frequency
- T -
TRIA............................Transmit Receive Integrated Assembly
- U -
USB.............................Universal Serial Bus
- V -
V.................................Volts
VDC ............................Volts of Direct Current
VNA............................Viasat Network Power Adapter
VS3.............................ViaSat-3
- W -
WAN...........................Wide Area Network
Table of contents
Popular Transceiver manuals by other brands

Zonton
Zonton 999 Professional user manual

Technisonic Industries Limited
Technisonic Industries Limited TMS-110 Installation and operating instructions

Standard Communications
Standard Communications GX1510U Service manual

Yaesu
Yaesu FT-730R instruction manual

Kenwood
Kenwood TS-480HX instruction manual

Barrett
Barrett 4050 operating manual