iMettos BL-X User manual
Model: BL-X
Please read this instruction manual carefully before operating this equipment
Commercial Blender
Instruction Manual
1
1.Safety Tips
Important Safeguards
1. Ensure the container is exactly on motor base before starting.
2. Please hold the container when it starts, as the motor is quite powerful. In addition,
ensure the clutch is in place.
3. No tamper when starting the motor. Put cover on when using tamper.
4. To prevent the danger of the sharp blade, don’t get food from the container by hand
whether the container is put on the motor base.
5. Before pouring food out of the container, remove it from the motor base first.
6. Note if touching on/off switch carelessly before of after starting
2.Feature
This blender is equipped with an industrial powerful motor whose rotary speed is up to
25,000rpm.Dry or wet food can be quickly & efficiently into powder or mud, and its original
nutrition and flavor still remained. It is a professional high-speed blender.
Multi-use(en Closed with fruit & vegetable organic operation booklet)
Industrial high-speed motor, high efficiency, powerful
stainless steel & harden blade
Using high quality tempered transparent plastic container, will not easily break(high
temperature vulcanization treatment, food grade rubber cap, safe and hygiene is
safeguarded)
Important when using ice in the container do not start until all liquid ingredients are
included.
3. Technical data
3.1 Technical specification
Name
Commercial Blender
Voltage
220-240 V/50 Hz
Capacity
2000c.c
Endurance of container
-40c-180c
Power
1500 W
Weight
4.2 kg
Length of cord
1.8 M
Dimension
W224.7*D224.7*H478.9mm
Protector
Current protector, Thermal protector for Motor
Read this instruction manual before using and keep them
available at all times!
2
3.2Overview of parts
3.3 Electric circuit
3
4. Operation Instruction
4.1 Operation
1) Make sure the left switch is locating at OFF
2) Connect the power, put the jug on the bade before you have confirmed the cap is well
covered on the jug.
3) Make the left switch locate at ON.
4) Set the speed adjustor to the suitable speed
5) If you want to made a higher speed, please push the PULSE switch on the right.
4.2 Safeguards
1) Unplug when the blender is not in use.
2) The cover can be open only when the blade agitator stops completely.
3) When cleaning, ensure to unplug first, the main base and the container must be
washed separately.
4) Don’t put the motor base in the water or the dishwasher.
5) When it’s in use, keep the kids away and prevent Improper action of children to
danger.
6) If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid hazard.
7) No metal articles, such as knives, forks, spoons…etc in the container.
8) To prevent the danger of the cutting blade, don’t clean by hand.
5. Maintenance Tips
1) When cleaning ,unplug & turn main switch off.
2) Clean the body& the cover with soft cloth
3) Don’t clean inside of container by hand unless blade is already removed.
4) Clean the rotary shaft & the motor with dry cloth.
5) When it is not easy to remove dirt, clean with detergent and then wipe it by dry cloth.
6) For best results it is recommended to replace the blades yearly.
6.Trouble Shooting
Check if the circuit breaker button is turned off. Press it to reset if the blender still doesn’t
work. Please check the list in the following:
1) The power plug is inserted into the power outlet.
2) Use or automatic switch shuts off.
7.Waste disposal
4
Discarding old devices
At the end of its service life the discarded device has to be disposed in accordance with the
national regulations. It is advisable to contact a company which is specialized in waste
disposal, or just contact the local disposal service in your community.
WARNING!
To exclude any abuse and the dangers involved make the waste device unfit for use before
disposal. For that purpose disconnect device from mains supply and remove mains
connection cable from the device.
CAUTION!
For the disposal of the device please consider and act according to the national and local
rules and regulations.
8.Warranty
iMettos warrants to the original purchaser of every new product, under normal and proper
use and maintenance service as specified by iMettos and upon proper installation and
start-up in accordance with the instruction packet supplied with each unit. iMettos’
obligation under this warranty is limited to a period of two (2) year from the date of original
installation.
WARRANTY CLAIMS
All claims for parts must be made directly through iMettos. All claims should include:
Personal Details: Products Details:
Your name: Model number:
Your company: Serial number of the product:
Address: Date of purchase:
Email: Proof of purchase :
Phone:
Pertinent information supporting the existence of the alleged defect.(Such as picture etc.)
Our warranty departments will according to the actual situation and reply you
within 24hours.
5
iMettos Limited
www.imettos.co.uk
Table of contents
Other iMettos Blender manuals
