imilab CMSXJ17A User manual
IMI Home Security Camera 1080p
User Manual
Read this manual carefully before use, and retain it for future reference.
Product Introduction
Package contents: IMI Home Security Camera 1080p x 1, power cable x 1,
user manual x 1
Weight: 64.8 g
Lens Angle: 110°
Focal length: 3.2 mm
Resolution: 1080p
Front View Power cable
Mic
Status
indicator
Lens
Specifications
Name: IMI Home Security Camera 1080p
Model: CMSXJ17A
Power input: 5 V 2 A
Operating temperature: -10℃~50℃
Wireless connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4GHz
Expandable Memory: MicroSD card (up to 64 GB)
Compatible with: Android 4.4 or iOS 9.0 or later
Dimensions: 102 mm x 66 mm x 62 mm
RESET
Micro USB port
MicroSD card
Reset hole
Rear View Side View
Description of Reset Operation
Use the needle to press the hole long enough to restore the factory seings
Indicator Light
Steady blue on: connected/device status is use
Flashing blue: network exception
Flashing orange rapidly: Waiting for connection
Flashing orange slowly: system upgrade in progress
Power on the camera for the first time
The camera will automatically activate once the power cable is inserted into the
Micro-USB charging port. If the indicator light is flashing orange, that means the
device is activated successful.
If you do not see a flashing orangelight, please reset the device.
Open the Mi Home app and follow the prompts(Please install the product is
power-on and in areas with Wi-Fi reception, and try to place the device where the
Wi-Fi signal is strong.)
Connection Setup
Install Mi Home app
Scan the QR code or go to App store to download and install Mi Home app Control
your device and interact it with other smart home devices in Mi Home app.
1. Login in your MI account at MI Home app. (If you not have MI account, please
registration first.)
2. Click the quick add buon on home page or top right buon “+” to add device.
Device Connection
Your Home
Tap to add a device
My devices
Enter device name to add
Device nearby Add manually
4G
4:19
Add device
Camera
Video camera
4:19
Add device
4G
Search
Camera
Video camera
4. Please follow the Setup steps to connect your device.
(Android Device) (iOS Device)
3. Please Click the top right buon “ ” to Scan this QR code on
deviece boom, and you also can search “IMI Home Security
Camera 1080p” at Search bar to add device.
Android user can using “Scanning nearby devices” to quick add
device.
Real-time video browsing
Available options include 24-hours, daytime, and nighime monitoring.
Supports displays with different resolutions (HD is equal to 1080p).
Support partial zooming in to view details.
Features
Day mode
Night mode
RESET
Playback
Video clips can be stored in the MicroSD card installed on the camera. Users can
view these video clips at any time.
Ensure that the MicroSD card can be properly detected by the camera.
Supports up to 64 GB Micro SD card.
Ensure the MicroSD card support FAT32/exFAT.
Device sharing
Supports video sharing with family members via mobile app features.
To view the shared video, you need to download Mi Home App, anduse a Xiaomi
account for login.
Rename
IMI Home Security Camera 1080P
Share device
Share group
Check for firmware updates
Remove device
Add Home screen shortcut
Network info
Feedback
Security seings
General seings
We hereby declare that all essential radio test suites have been carried out and that
the above named product is in conformity to all the essential requirement
of Directive 2014/53/EU.
Conclusion: When tested as specified, the results shown on the report meet the
requirements of the Reuse / Recycling / Rccovery Rate of Directive
2012/19/EU released on EU Oddicial Joumal (OJ).
Manufacturer: Shanghai Imilab Technology Co., Ltd.
(a Mi Ecosystem Company)
Address: Room 908, No. 1, Lane 399, Shengxia Rd., China Pilot Free Trade Zone,
Shanghai, China 201210
For further information, please go to www.imilab.com.
Support: [email protected]
Table of contents
