imilab W11L User manual

Smart Watch W11L
User Manual

01 How to wear correctly
For comfortable daily use, before wearing please place the watch in the suitable
position and adjust tightness to fit your wrist. See below picture.
Tip: The heart rate data may be affected if wearing too loosely.
02 How to pair the watch with your mobile phones
Long press the side button to turn on the watch, slide the homepage of the dial
from top to bottom, open the settings-download the QR code, scan the QR code with
your mobile phone, you will get to download and install the APP. Or you can also scan
the QR code below to download and install it in the mobile app market.
Open the APP GloryFit, enter to device page and select the watch accordingly , then
connect the device as guided steps.
Tips:
1.During paring, please ensure mobile phone’s BT is on to ensure the normal
connection.
2.2.If the device cannot be found or connected in the pairing process , please reboot
the smart watch by long press power button, or choose to reset, then re-search the
device.
03 How to use the watch
a.Slide down from the homepage to Shortcut Setting Page.
b.Slide up from homepage to the Message Page.
c.Slide right from homepage to Main Menu Page.
d.Slide left from the homepage to Main Function Shortcut Page.
e.Long press the watch face page for 3s to enter into selection page, then slide left or
right and click the one you prefer to change dials.
f.Long press the power button for 3s to Power ON; from home page, long press the
power button for 3s, and tap√ to Power OFF.
g.Press the power button to pause or continue in Stopwatch page.
h.Tap the power button:
Back to previous menu during normal operation.
Screen on / Screen off at watch face homepage.
04 Functions
06 Other functions
Alarm clock, Sedentary reminder, Remote Camera control, Low battery reminder,
Call reminder, Find smart watch, Watch Face Customized Feature, 12H/24H time
format, KM/Mile unit format, Language setting.
07 Charging
Place the charging cable into watch charging port, ensuring the metal pins fully
connected.
 Please use the correct charging adapters which are 5V 0.5A above.
If smart watch can not be powered on after being left unused for long time,
please clean up the charging metal pins to make sure connecting well.
08 Warranty
 One year warranty is for default hardware defectives, half of year is for battery
and charging cable.
 Below reasons cause to defectives are not included in free warranty service:
1) Personal assemble or disassemble.
2) Falling damage during use.
3) All man-made damage or due to the third party's fault, improper use(such as:
water in the smart watch, external force shattering, scratch during use etc.
Please provide a warranty card with the details filled when request for after
selling service.
 Please contact with direct dealers for warranty service.
 Please note all functions of the product are based on physical objects.

01 How to wear correctly
For comfortable daily use, before wearing please place the watch in the suitable
position and adjust tightness to fit your wrist. See below picture.
Tip: The heart rate data may be affected if wearing too loosely.
02 How to pair the watch with your mobile phones
Long press the side button to turn on the watch, slide the homepage of the dial
from top to bottom, open the settings-download the QR code, scan the QR code with
your mobile phone, you will get to download and install the APP. Or you can also scan
the QR code below to download and install it in the mobile app market.
Open the APP GloryFit, enter to device page and select the watch accordingly , then
connect the device as guided steps.
Tips:
1.During paring, please ensure mobile phone’s BT is on to ensure the normal
connection.
2.2.If the device cannot be found or connected in the pairing process , please reboot
the smart watch by long press power button, or choose to reset, then re-search the
device.
03 How to use the watch
a.Slide down from the homepage to Shortcut Setting Page.
b.Slide up from homepage to the Message Page.
c.Slide right from homepage to Main Menu Page.
d.Slide left from the homepage to Main Function Shortcut Page.
e.Long press the watch face page for 3s to enter into selection page, then slide left or
right and click the one you prefer to change dials.
f.Long press the power button for 3s to Power ON; from home page, long press the
power button for 3s, and tap√ to Power OFF.
g.Press the power button to pause or continue in Stopwatch page.
h.Tap the power button:
Back to previous menu during normal operation.
Screen on / Screen off at watch face homepage.
04 Functions
06 Other functions
Alarm clock, Sedentary reminder, Remote Camera control, Low battery reminder,
Call reminder, Find smart watch, Watch Face Customized Feature, 12H/24H time
format, KM/Mile unit format, Language setting.
07 Charging
Place the charging cable into watch charging port, ensuring the metal pins fully
connected.
 Please use the correct charging adapters which are 5V 0.5A above.
If smart watch can not be powered on after being left unused for long time,
please clean up the charging metal pins to make sure connecting well.
08 Warranty
 One year warranty is for default hardware defectives, half of year is for battery
and charging cable.
 Below reasons cause to defectives are not included in free warranty service:
1) Personal assemble or disassemble.
2) Falling damage during use.
3) All man-made damage or due to the third party's fault, improper use(such as:
water in the smart watch, external force shattering, scratch during use etc.
Please provide a warranty card with the details filled when request for after
selling service.
 Please contact with direct dealers for warranty service.
 Please note all functions of the product are based on physical objects.

01 How to wear correctly
For comfortable daily use, before wearing please place the watch in the suitable
position and adjust tightness to fit your wrist. See below picture.
Tip: The heart rate data may be affected if wearing too loosely.
02 How to pair the watch with your mobile phones
Long press the side button to turn on the watch, slide the homepage of the dial
from top to bottom, open the settings-download the QR code, scan the QR code with
your mobile phone, you will get to download and install the APP. Or you can also scan
the QR code below to download and install it in the mobile app market.
Open the APP GloryFit, enter to device page and select the watch accordingly , then
connect the device as guided steps.
Tips:
1.During paring, please ensure mobile phone’s BT is on to ensure the normal
connection.
2.2.If the device cannot be found or connected in the pairing process , please reboot
the smart watch by long press power button, or choose to reset, then re-search the
device.
03 How to use the watch
a.Slide down from the homepage to Shortcut Setting Page.
b.Slide up from homepage to the Message Page.
c.Slide right from homepage to Main Menu Page.
d.Slide left from the homepage to Main Function Shortcut Page.
e.Long press the watch face page for 3s to enter into selection page, then slide left or
right and click the one you prefer to change dials.
f.Long press the power button for 3s to Power ON; from home page, long press the
power button for 3s, and tap√ to Power OFF.
g.Press the power button to pause or continue in Stopwatch page.
h.Tap the power button:
Back to previous menu during normal operation.
Screen on / Screen off at watch face homepage.
04 Functions
06 Other functions
Alarm clock, Sedentary reminder, Remote Camera control, Low battery reminder,
Call reminder, Find smart watch, Watch Face Customized Feature, 12H/24H time
format, KM/Mile unit format, Language setting.
07 Charging
Place the charging cable into watch charging port, ensuring the metal pins fully
connected.
 Please use the correct charging adapters which are 5V 0.5A above.
If smart watch can not be powered on after being left unused for long time,
please clean up the charging metal pins to make sure connecting well.
08 Warranty
 One year warranty is for default hardware defectives, half of year is for battery
and charging cable.
 Below reasons cause to defectives are not included in free warranty service:
1) Personal assemble or disassemble.
2) Falling damage during use.
3) All man-made damage or due to the third party's fault, improper use(such as:
water in the smart watch, external force shattering, scratch during use etc.
Please provide a warranty card with the details filled when request for after
selling service.
 Please contact with direct dealers for warranty service.
 Please note all functions of the product are based on physical objects.

01 How to wear correctly
For comfortable daily use, before wearing please place the watch in the suitable
position and adjust tightness to fit your wrist. See below picture.
Tip: The heart rate data may be affected if wearing too loosely.
02 How to pair the watch with your mobile phones
Long press the side button to turn on the watch, slide the homepage of the dial
from top to bottom, open the settings-download the QR code, scan the QR code with
your mobile phone, you will get to download and install the APP. Or you can also scan
the QR code below to download and install it in the mobile app market.
Open the APP GloryFit, enter to device page and select the watch accordingly , then
connect the device as guided steps.
Tips:
1.During paring, please ensure mobile phone’s BT is on to ensure the normal
connection.
2.2.If the device cannot be found or connected in the pairing process , please reboot
the smart watch by long press power button, or choose to reset, then re-search the
device.
03 How to use the watch
a.Slide down from the homepage to Shortcut Setting Page.
b.Slide up from homepage to the Message Page.
c.Slide right from homepage to Main Menu Page.
d.Slide left from the homepage to Main Function Shortcut Page.
e.Long press the watch face page for 3s to enter into selection page, then slide left or
right and click the one you prefer to change dials.
f.Long press the power button for 3s to Power ON; from home page, long press the
power button for 3s, and tap√ to Power OFF.
g.Press the power button to pause or continue in Stopwatch page.
h.Tap the power button:
Back to previous menu during normal operation.
Screen on / Screen off at watch face homepage.
04 Functions
06 Other functions
Alarm clock, Sedentary reminder, Remote Camera control, Low battery reminder,
Call reminder, Find smart watch, Watch Face Customized Feature, 12H/24H time
format, KM/Mile unit format, Language setting.
07 Charging
Place the charging cable into watch charging port, ensuring the metal pins fully
connected.
Pedometer: Record daily steps, calorie, and distance;
Historical data details can be viewed on APP.
 Please use the correct charging adapters which are 5V 0.5A above.
If smart watch can not be powered on after being left unused for long time,
please clean up the charging metal pins to make sure connecting well.
08 Warranty
 One year warranty is for default hardware defectives, half of year is for battery
and charging cable.
 Below reasons cause to defectives are not included in free warranty service:
1) Personal assemble or disassemble.
2) Falling damage during use.
3) All man-made damage or due to the third party's fault, improper use(such as:
water in the smart watch, external force shattering, scratch during use etc.
Please provide a warranty card with the details filled when request for after
selling service.
 Please contact with direct dealers for warranty service.
 Please note all functions of the product are based on physical objects.

01 How to wear correctly
For comfortable daily use, before wearing please place the watch in the suitable
position and adjust tightness to fit your wrist. See below picture.
Tip: The heart rate data may be affected if wearing too loosely.
02 How to pair the watch with your mobile phones
Long press the side button to turn on the watch, slide the homepage of the dial
from top to bottom, open the settings-download the QR code, scan the QR code with
your mobile phone, you will get to download and install the APP. Or you can also scan
the QR code below to download and install it in the mobile app market.
Open the APP GloryFit, enter to device page and select the watch accordingly , then
connect the device as guided steps.
Tips:
1.During paring, please ensure mobile phone’s BT is on to ensure the normal
connection.
2.2.If the device cannot be found or connected in the pairing process , please reboot
the smart watch by long press power button, or choose to reset, then re-search the
device.
03 How to use the watch
a.Slide down from the homepage to Shortcut Setting Page.
b.Slide up from homepage to the Message Page.
c.Slide right from homepage to Main Menu Page.
d.Slide left from the homepage to Main Function Shortcut Page.
e.Long press the watch face page for 3s to enter into selection page, then slide left or
right and click the one you prefer to change dials.
f.Long press the power button for 3s to Power ON; from home page, long press the
power button for 3s, and tap√ to Power OFF.
g.Press the power button to pause or continue in Stopwatch page.
h.Tap the power button:
Back to previous menu during normal operation.
Screen on / Screen off at watch face homepage.
04 Functions
06 Other functions
Alarm clock, Sedentary reminder, Remote Camera control, Low battery reminder,
Call reminder, Find smart watch, Watch Face Customized Feature, 12H/24H time
format, KM/Mile unit format, Language setting.
07 Charging
Place the charging cable into watch charging port, ensuring the metal pins fully
connected.
Heart Rate Monitor : 24H real-time heart rate
monitor.
Daily records and Historical data could be viewed on
APP.
Blood Oxygen: Blood oxygen monitor.
Daily records and Historical data could be viewed
on APP.
NOTE: Data is for reference only, not for medical
purpose.
Sports modes: walking, running, cycling, climbing,
yoga, skipping, badminton, spinning bike, sit-ups.
Daily records and Historical data could be viewed
on APP.
Notifications: Different notifications can be pushed
from mobile phones.
It can keep up to 8 notifications on this page.
Sleep Monitor: Record sleep time and status.
Daily records and Historical data could be viewed
on APP.
 Please use the correct charging adapters which are 5V 0.5A above.
If smart watch can not be powered on after being left unused for long time,
please clean up the charging metal pins to make sure connecting well.
08 Warranty
 One year warranty is for default hardware defectives, half of year is for battery
and charging cable.
 Below reasons cause to defectives are not included in free warranty service:
1) Personal assemble or disassemble.
2) Falling damage during use.
3) All man-made damage or due to the third party's fault, improper use(such as:
water in the smart watch, external force shattering, scratch during use etc.
Please provide a warranty card with the details filled when request for after
selling service.
 Please contact with direct dealers for warranty service.
 Please note all functions of the product are based on physical objects.

01 How to wear correctly
For comfortable daily use, before wearing please place the watch in the suitable
position and adjust tightness to fit your wrist. See below picture.
Tip: The heart rate data may be affected if wearing too loosely.
02 How to pair the watch with your mobile phones
Long press the side button to turn on the watch, slide the homepage of the dial
from top to bottom, open the settings-download the QR code, scan the QR code with
your mobile phone, you will get to download and install the APP. Or you can also scan
the QR code below to download and install it in the mobile app market.
Open the APP GloryFit, enter to device page and select the watch accordingly , then
connect the device as guided steps.
Tips:
1.During paring, please ensure mobile phone’s BT is on to ensure the normal
connection.
2.2.If the device cannot be found or connected in the pairing process , please reboot
the smart watch by long press power button, or choose to reset, then re-search the
device.
03 How to use the watch
a.Slide down from the homepage to Shortcut Setting Page.
b.Slide up from homepage to the Message Page.
c.Slide right from homepage to Main Menu Page.
d.Slide left from the homepage to Main Function Shortcut Page.
e.Long press the watch face page for 3s to enter into selection page, then slide left or
right and click the one you prefer to change dials.
f.Long press the power button for 3s to Power ON; from home page, long press the
power button for 3s, and tap√ to Power OFF.
g.Press the power button to pause or continue in Stopwatch page.
h.Tap the power button:
Back to previous menu during normal operation.
Screen on / Screen off at watch face homepage.
04 Functions
06 Other functions
Alarm clock, Sedentary reminder, Remote Camera control, Low battery reminder,
Call reminder, Find smart watch, Watch Face Customized Feature, 12H/24H time
format, KM/Mile unit format, Language setting.
07 Charging
Place the charging cable into watch charging port, ensuring the metal pins fully
connected.
Remote Music Control: Remote control the music
player of mobile phone, pause/ switch to previous
or next song.
Stopwatch: timing
Settings: Brightness adjustment/ QR code for APP
download/ Find mobile phone/ About
watch/Restore factory/Shut down
Pedometer: Record daily steps, calorie, and
distance;
Historical data details can be viewed on APP.
05 Main Functions Shortcut Page:
 Please use the correct charging adapters which are 5V 0.5A above.
If smart watch can not be powered on after being left unused for long time,
please clean up the charging metal pins to make sure connecting well.
08 Warranty
 One year warranty is for default hardware defectives, half of year is for battery
and charging cable.
 Below reasons cause to defectives are not included in free warranty service:
1) Personal assemble or disassemble.
2) Falling damage during use.
3) All man-made damage or due to the third party's fault, improper use(such as:
water in the smart watch, external force shattering, scratch during use etc.
Please provide a warranty card with the details filled when request for after
selling service.
 Please contact with direct dealers for warranty service.
 Please note all functions of the product are based on physical objects.

01 How to wear correctly
For comfortable daily use, before wearing please place the watch in the suitable
position and adjust tightness to fit your wrist. See below picture.
Tip: The heart rate data may be affected if wearing too loosely.
02 How to pair the watch with your mobile phones
Long press the side button to turn on the watch, slide the homepage of the dial
from top to bottom, open the settings-download the QR code, scan the QR code with
your mobile phone, you will get to download and install the APP. Or you can also scan
the QR code below to download and install it in the mobile app market.
Open the APP GloryFit, enter to device page and select the watch accordingly , then
connect the device as guided steps.
Tips:
1.During paring, please ensure mobile phone’s BT is on to ensure the normal
connection.
2.2.If the device cannot be found or connected in the pairing process , please reboot
the smart watch by long press power button, or choose to reset, then re-search the
device.
03 How to use the watch
a.Slide down from the homepage to Shortcut Setting Page.
b.Slide up from homepage to the Message Page.
c.Slide right from homepage to Main Menu Page.
d.Slide left from the homepage to Main Function Shortcut Page.
e.Long press the watch face page for 3s to enter into selection page, then slide left or
right and click the one you prefer to change dials.
f.Long press the power button for 3s to Power ON; from home page, long press the
power button for 3s, and tap√ to Power OFF.
g.Press the power button to pause or continue in Stopwatch page.
h.Tap the power button:
Back to previous menu during normal operation.
Screen on / Screen off at watch face homepage.
04 Functions
06 Other functions
Alarm clock, Sedentary reminder, Remote Camera control, Low battery reminder,
Call reminder, Find smart watch, Watch Face Customized Feature, 12H/24H time
format, KM/Mile unit format, Language setting.
07 Charging
Place the charging cable into watch charging port, ensuring the metal pins fully
connected.
Heart Rate Monitor : 24H real-time heart rate
monitor.
Daily records and Historical data could be viewed
on APP.
Sleep Monitor: Record sleep time and status.
Daily records and Historical data could be viewed
on APP.
Menstrual Cycle Reminder:
Set the gender as "female" on the app of personal
information page, turn on the menstrual cycle
function. Only then this function will appear in the
watch menu.
The corresponding safety period, menstrual period,
ovulation period reminder will be displayed on smart
watch accordingly.
 Please use the correct charging adapters which are 5V 0.5A above.
If smart watch can not be powered on after being left unused for long time,
please clean up the charging metal pins to make sure connecting well.
08 Warranty
 One year warranty is for default hardware defectives, half of year is for battery
and charging cable.
 Below reasons cause to defectives are not included in free warranty service:
1) Personal assemble or disassemble.
2) Falling damage during use.
3) All man-made damage or due to the third party's fault, improper use(such as:
water in the smart watch, external force shattering, scratch during use etc.
Please provide a warranty card with the details filled when request for after
selling service.
 Please contact with direct dealers for warranty service.
 Please note all functions of the product are based on physical objects.

01 How to wear correctly
For comfortable daily use, before wearing please place the watch in the suitable
position and adjust tightness to fit your wrist. See below picture.
Tip: The heart rate data may be affected if wearing too loosely.
02 How to pair the watch with your mobile phones
Long press the side button to turn on the watch, slide the homepage of the dial
from top to bottom, open the settings-download the QR code, scan the QR code with
your mobile phone, you will get to download and install the APP. Or you can also scan
the QR code below to download and install it in the mobile app market.
Open the APP GloryFit, enter to device page and select the watch accordingly , then
connect the device as guided steps.
Tips:
1.During paring, please ensure mobile phone’s BT is on to ensure the normal
connection.
2.2.If the device cannot be found or connected in the pairing process , please reboot
the smart watch by long press power button, or choose to reset, then re-search the
device.
03 How to use the watch
a.Slide down from the homepage to Shortcut Setting Page.
b.Slide up from homepage to the Message Page.
c.Slide right from homepage to Main Menu Page.
d.Slide left from the homepage to Main Function Shortcut Page.
e.Long press the watch face page for 3s to enter into selection page, then slide left or
right and click the one you prefer to change dials.
f.Long press the power button for 3s to Power ON; from home page, long press the
power button for 3s, and tap√ to Power OFF.
g.Press the power button to pause or continue in Stopwatch page.
h.Tap the power button:
Back to previous menu during normal operation.
Screen on / Screen off at watch face homepage.
04 Functions
06 Other functions
Alarm clock, Sedentary reminder, Remote Camera control, Low battery reminder,
Call reminder, Find smart watch, Watch Face Customized Feature, 12H/24H time
format, KM/Mile unit format, Language setting.
07 Charging
Place the charging cable into watch charging port, ensuring the metal pins fully
connected.
 Please use the correct charging adapters which are 5V 0.5A above.
If smart watch can not be powered on after being left unused for long time,
please clean up the charging metal pins to make sure connecting well.
08 Warranty
 One year warranty is for default hardware defectives, half of year is for battery
and charging cable.
 Below reasons cause to defectives are not included in free warranty service:
1) Personal assemble or disassemble.
2) Falling damage during use.
3) All man-made damage or due to the third party's fault, improper use(such as:
water in the smart watch, external force shattering, scratch during use etc.
Please provide a warranty card with the details filled when request for after
selling service.
 Please contact with direct dealers for warranty service.
 Please note all functions of the product are based on physical objects.

Warranty Certificate
Client Name
Vendor’s Contact
Product IMEI Code
Client’s Address
Vendor’s Address
Client Info
Vendor
Warranty Record
Date Problems Diagnosis More Info
Contact Info
Purchase Date
Product Type (Stamp)