IMOU Bullet 2S User manual

Bullet 2S
Bullet 2S 4MP
Quick Start Guide
www.imoulife.com
Full olor
Night Vision

Welcome
Thank you for choosing IMOU.
We are devoted to roviding you easy smart home roducts.
If you have roblems using the roduct, lease contact
our service team before returning your roduct.
Our service mail: [e-mail]
Frequently asked questions can be found at
imoulife.com/su ort/hel
Riasztóbolt Magyarország Budaörs
www.riasztobolt.hu

Package content
LED Indicator
Lens
Built-in Mic
Reset Button
S otlight
Wi-FI Antenna
Camera introduction
Screw Package ×1
Camera ×1
Quick Start Guide×1
Positioning Map ×1 Waterproof Connector ×1
Power Adapter ×1

The pattern of the LE indicator is included in the following table.
LED Status
Green light on
Green and red light
ashing alternately
Powered o/LED turned o
Rebooting after reset
Booting
Device malfunction
Waiting for network
O
Red light on
Firmware updating
Device Status
Green light ashing
Network connection failed
Red light ashing
Operating properly
Micro SD Card Slot Built-in S eaker

1
Windows
Imou Life
Tips
i
To ensure the best possible wireless performance, please make sure there are no obstacles and electromagnetic
interference between the camera and router.

Setup
WIFI Nam e
Password
Next
Setup
Done
Installing the Camera
Positioning Ma
Wall Anchor
Mounting Surface
Mounting Screw
Camera
1
2
3
3
2
+60
-30
DC
12V1A

Troubleshooting
Problem Solution
The APP says "Failed to
congure device network"
• Reset your Camera and connect it again.
• Some cameras only support 2.4GHz, while some routers have dual band,
2.4G/5G. Make sure you are connecting 2.4GHz only.
No audio • Ensure audio function on camera is turned on.
• Ensure audio is turned up on viewing device.
Human detection not
working • Ensure you have enabled “Human Detection” in the Device Settings screen
of the Imou LifeApp.
The device cannot work
normally or start?
• If the green light is on, check whether the router can connect to the
Internet. If Internet is working, restartthe camera.
• If the red light ashes, reset the camera, and then congure the camera
again.
• If the red light is on, it means the camera is faulty.
• Check the LED indicator status. If the light is not in green, press and hold
the reset button for 10 s to reset the the carmera.
How to connect the
camera to a new Wi-Fi?
• If the camera is oine, reset the camera, and the congure the camera
again.
Connection is overtime?
The device is oine?
• Check if the distance between the camera and the router, the camera and
the smart phone is within 5 m (16.4 ft) during the connection.
When the Micro SD card
is full, how is the recorded
video saved?
• When the Micro SD card is full, the system will overwrite the previous
recorded videos. Save the important information in time.
Check the indicator status:

[e-mail] www.imoulife.com
E
@imouglobal W