ImpulseRC Reverb User manual

Reverb
Assembly Manual

1
2
Note: Use M3x6mm high tensile bolt and stainless M3 washer to carefully
pull the insert nuts in to the carbon fiber plate from below.
ITEM NO. DESCRIPTION
QTY
1 Upper Main Plate - CF 1.5mm 1
2 Insert Nut - SS 8
1. Upper Main Plate

4
2
1
3
ITEM NO. DESCRIPTION
QTY
1 Lower Main Plate - CF 2mm 1
2 Cone Washer - AL 2
3 M3 x 12mm Cap - HT 1
4 M3 x 10mm Cap - HT 1
2. Lower Main Plate

1
Note: Secure to finger tight only.
ITEM NO. DESCRIPTION
QTY
1
Arm Plate - CF 4mm 1
3. First Arm

2
3
4
1
Note: Fully tighten all 8 bolts in a star pattern, working
from the outside to the inside.
ITEM NO. DESCRIPTION
QTY
1
Arm Plate - CF 4mm 3
2 Cone Washer - AL 6
3 M3 x 12mm Cap - HT 3
4 M3 x 10mm Cap - HT 3
4. Remaining Arms

1
2
Note: Secure PDB to Upper Main Plate with the included
double sided tape pad.
ITEM NO. DESCRIPTION
QTY
1
Reverb PDB 1
2
M3 Dampers 4
5. PDB

3
4
12
ITEM NO. DESCRIPTION
QTY
1 Standoff 30mm - AL 3
2 Standoff 14.5mm - AL 2
3 Standoff 24.5mm - AL 2
4 M3 x 6mm Button - HT 7
6. Standoffs

1
2
3
ITEM NO. DESCRIPTION
QTY
1 FPV Camera 1
2
Camera Plate - CF 2mm 2
3
M2 x 4mm Cap - SS 4
7. Camera

8. Camera Assembly

2
1
ITEM NO. DESCRIPTION
QTY
1 Top Plate - CF 1.5mm 1
2 Lipo Pad - Foam 1
9. Lipo Pad

21
ITEM NO. DESCRIPTION
QTY
1 M3 x 6mm Button - HT 3
2 M3 x 8mm Button - HT 2
10. Top Plate

3
1
2
ITEM NO. DESCRIPTION
QTY
1 Antenna Tube 2
2 Antenna Tube Clamp 2
3 M3 x 16mm Button - HT 2
11. Antenna Tube Clamp

2 3
4
5
1
ITEM NO. DESCRIPTION
QTY
1 Brain3D GoPro Mount - TPU 1
2 M3 x 10mm Cap - HT 1
3 M3 x 8mm Button - HT 2
4 M3 Washer - SS 2
5 Cone Washer - AL 1
12. Brain3D GoPro Mount