E-FLITE C-GO1 Operator's manual
QuickStartofC‐GO1
Warranty of C-GO1...................................................................................................................15
2
Content
C‐GO1Features.................................................................................................................................3
USINGYOURC‐GO1:BASICS.............................................................................................................9
GETTINGSTARTED.....................................................................................................................9
CAMERADEFAULTSETTINGS.....................................................................................................9
POWERINGONANDOFF...........................................................................................................9
USINGYOURC‐GO1:CAMERAMODES...........................................................................................10
VIDEO......................................................................................................................................10
PHOTO.....................................................................................................................................10
UsingST24toControlC‐GO1..........................................................................................................11
UsingYourIOSSystemtoControlC‐GO1........................................................................................12
UsingYourAndroidSystemtoControlC‐GO1.................................................................................13
FCC STATEMENT...................................................................................................................14
3
C‐GO1Features
e
图一
4.Wi‐FiIndicatorLight
1. Lens
3.Video/Photo
IndicatorLight(Blue;
Onforvideo,OFFfor
photo)
2.WiFI
ON/OF
Button
4
图二
8.POWERSwitch
(MODEsideto
turnon)
7.MODEButton
6.
SHUTTER
Button
5.Charging
Indicator
Light(Blue
lightonwhen
chargingis
complete)
5
图三
10.Retaining
Screwsocket
9.Wi‐FiCableSocket
6
图四
11.USBPort(SupportPC
connectionandbatterycharging)
12.Audio
Output
7
MicroSDCard
Slot
8
5GHZCable
9
USINGYOURC‐GO1:BASICS
GETTINGSTARTED
BeforeusingyourC‐GO1forthefirsttime:
1. InsertamicroSDcardintothecardslotwithlabelfacingforward,followthearrow
direction.
2. Placebatteryintothecamera.
3. Chargebattery.TheincludedLi‐Pobatterycomespartiallycharged.Tocharge,connectthe
includedUSBcabletocameraandconnecttheotherendofthecabletoapowersourcesuch
asacomputer.Nodamagewilloccurtothecameraorbatteryifusedpriortoafullcharge.
C‐GOTIP:ChargerIndicatorLightwhencameraisOFFandcharging,show:
ChargerIndicatorLightispurplewhencharging.
ChargerIndicatorLightisbluewhenchargingiscomplete.
CAMERADEFAULTSETTINGS
TheC‐GO1camerapowersupwithfollowingdefaultsettings:
VideoResolution:1080p30fps
PhotoResolution:2Megapixels(MP)
Wi‐FIStatus:ON
VideoMODE:ON
PHOTOMODE:OFF
POWERINGONANDOFF
ToPowerON:
PressandPushthePowerSwitch(pic)totheMODEButtonsideandrelease.Theblue
Video/PhotoIndicatorLightandWi‐FiIndicatorLightflashseveraltimesandthenkeepbeingon
toenteridlestatus.
TopowerOFF:
PressandpushthePowerSwitch（pic）totheotherside,andallindicatorlightsareoff.
10
USINGYOURC‐GO1:CAMERAMODES
VIDEO
OnceyoupoweronyourC‐GO1,thecameraisinVideoMode.AndtheWi‐FiIndicatorLightison
asdefaultsetting.
ToStartRecording:
PressandreleaseSHUTTERBUTTON.TheblueVideo/PhotoIndicatorLightflashesfromtimeto
indicatereadingstatus.
ToStopRecording:
PressandreleaseSHUTTERBUTTON.TheblueVideo/PhotoIndicatorLightkeepsbeingonbut
stopsflashingtoindicaterecordinghasstopped.
PHOTO
IntheVideoMode,pressandreleaseMODEBUTTONtoenterPhotoMode.Theblue
Video/PhotoIndicatorLightisofftoindicatethatthePhotoModeison.
ToTakeaPhoto
PressandreleaseSHUTTERBTTON.TheVideo/PhotoIndicatorLightflashesforonetime.And
repeatthisactionformorephotos.
ToSwitchtoVideoMode
PressandreleaseMODEBUTTON.TheblueVideo/PhotoIndicatorLightisontoshowthecamera
isinVideoModeagain.
C‐GOTIP:
Pressthebuttonswithaproperstrengthandspeed.Ifthereisnoresponseoftheindicator
lights,youcanrepeatyouraction.
PleasemakesurethatthecameraisoffwhenyoutakethemicroSDcardout,oritmaylead
tofileloss.
11
UsingST24toControlC‐GO1
1. PoweronC‐GO1
2. BindST24andC‐GO1.Therearetwowaysofbinding:
A. ConnectWi‐FiinPADinterface,andinputthecorrectpassword.
B. BindC‐GO1inFPVinterface,andinputthecorrectpassword(Thetwopasswordsare
same).
3. Whenbindingiscomplete,enterFPV→ModelSelect→SelectaModelorchooseamodel
youhavesetinadvance.ReturntoFPVscreenandpressTakeOfftoconnectvideo.
4. PressandreleaseSHUTTERBUTTON.ST24beepsonetime,andthefollowinginformation
appearsonthetopofscreen:Startcapture→Capturecomplete.
5. PressB3button,apromptboxof“Startrecord”onthemiddleofscreentopappears,andon
therightofthescreentop,recordtimeisshowed.
6. PressB3buttonagain,“Stoprecord”appearsonthemiddleofscreentop.
7. ChecktheRecord:
PressLandingButton→Enter→SystemSettings→FPVQuickReview
12
UsingYourIOSSystemtoControlC‐GO1
1. PoweronC‐GO1(PleasefirstinstallFPVAppsinyouriPhone).
2. OpenFPVAppsandjoinnetYC1080F_5G_08......
3. AfterbindingC‐GO1andiPhonesuccessfully,usephoto/videofunctiononyourphoneas
usual:press（pic）totakeaphoto,andpress（pic）torecordavideo.AsforC‐GO1,the
indicatorlight’sstatusisthesameasitworksindependently.
C‐GOTIP:
YoucancheckyourphotosandvideorecordingsthroughbothiPhoneandmicroSDcard
reader.
PleasemakesurethatthecameraisoffwhenyoutakethemicroSDcardout,oritmay
leadtofileloss.
SameoperationforphonesofAndroidsystem.
13
UsingYourAndroidSystemtoControlC‐GO1
(TakeSAMSUNGGALAXYNote2forexample)
1. PoweronC‐GO1(PleasefirstinstallFPVAppsinyourSAMSUNGGALAXYNote2).
2. OpenFPVAppsandjoinnetYC1080F_5G_08......
3. AfterbindingC‐GO1andiPhonesuccessfully,usephoto/videofunctiononyourphoneas
usual:press（pic）totakeaphoto,andpress（pic）torecordavideo.AsforC‐GO1,the
indicatorlight’sstatusisthesameasitworksindependently.
C‐GOTIP:
YoucancheckyourphotosandvideorecordingsthroughbothSAMSUNGGALAXYNote2
andmicroSDcardreader.
PleasemakesurethatthecameraisoffwhenyoutakethemicroSDcardout,oritmay
leadtofileloss.
SameoperationforphonesofAndroidsystem.
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body
1. Hot plug is not available; please turn off the camera before inserting or
pulling out the SD card.
2. Neither photo nor video mode is available during charging.
3. Please avoid the camera connecting to 2 more equipment; otherwise the
fluency of the video and WiFi range will be influenced.
5. Good quality SD card with more than 2G storage space is recommended.
6. When the size of a video file has exceeded 1G, it will be automatically
written in another new file.
7. Please avoid sudden shut down during recording; this may lead to system
error of T card file. If any problem occurs, please format the SD card.
8. If the configurations file of DCIM in the SD card: dcim config, owns other AV
files, be careful when you delete them, otherwise; the original files would be
replaced by the following files with a same name.
9. Pls power off the camera when it is charging.
Warranty of C-GO1
Table of contents
