IMS IC32T User manual

UP UP
Installer's Choice
by IMS EP
Universal Wall Mounts
for
Flat Panel Display Screens
Installation Instructions for Models
IC32T - IC32F - IC60T - IC60F
TM
Installer's Choice by IMS EP - 1 Innovation Dr., Des Plaines, IL 60016
Ph. [phone] Fax [phone] www.installerschoice.com
Designed & Manufactured in the U.S.A
ISO9001 Quality
TM
Part Number Load Rating Flat Panel Display Size
IC32T (Thin Mount - Tilt)
100 Lbs. Max
23" to 32" Flat Panel Displays
IC32F (Thin Mount - Fixed)
IC60T (Thin Mount - Tilt)
37" to 60" Flat Panel Displays
IC60F (Thin Mount - Fixed)
Installer’s ChoiceTM
Universal Wall Mounts
for
Flat-Panel Displays
by IMS EP
Installation Instructions for Models
IC32T - IC32F - IC60T - IC60F
Installer’s ChoiceTM by IMS EP - 1 Innovation Dr., Des Plaines, IL 60016
Ph. [phone] • Fax [phone] • www.installerschoice.com
Designed & Manufactured in the U.S.A
ISO9001 Quality
1
3260WMIM1.1

Thank you for choosing an INSTALLER’S CHOICETM Wall Mount. This product has been specically designed to mount and
secure at panel televisions off the wall – providing proper at panel display viewing angles.
Do not use this product for any purpose not explicitly specied by Installer’s ChoiceTM.
The size and weight of your Flat Panel Display must not exceed the stated weight loads established for each Installer’s ChoiceTM
model (see cover page).
Failure to comply with these requirements could result in serious injury or property damage. If you do not understand these
directions, or have doubts about the safety of the installation, contact Installer’s ChoiceTM Customer Service @ 847-391-8100.
Installer’s ChoiceTM is not liable for damage/injury caused by incorrect mounting, assembly, or use.
Supplied Parts and Instructions
Before starting installation, please read ALL instructions carefully. Verify all parts are included and undamaged. If any parts are
missing or damaged, do not return the item to your dealer/installer-contact Installer’s ChoiceTM Customer Service @ 847-391-8100.
Tools Required
Level Drill Hammer
Pencil Socket Wrench Optional: Stud Finder
Tape Measure Screw Driver (Philips)
Installation Hardware
ALL necessary hardware to install your Flat Panel Display mount has been provided from Installer’s ChoiceTM. This includes
mounting hardware for Concrete, Brick, Concrete Block and Wood Stud walls. Please see the hardware packet included in the
internal packaging of this box.
Disclaimer
While Installer’s ChoiceTM /IMS Engineered Products makes reasonable efforts to include accurate and up-to-date information on
its Wall Mount Assembly Instructions, it makes no warranties or representations as to its accuracy. Information in this Instruction
Manual may contain technical inaccuracies or typographical errors and may be changed or updated without notice. IMSEP may
also make improvements and/or changes in the products and/or the programs described at any time without notice. IMSEP
assumes no liability or responsibility for any typographical or other errors or omissions in the content in this installation manual.
Limitation of Liability
Installer’s ChoiceTM disclaims any responsibility for loss of time or use of parts or equipment wherein Installer’s ChoiceTM mounts,
racks, components and accessories are used, transportation of any other incidental or consequential damage; and any implied
warranty of merchantability and tness for intended use are limited to the duration of this limited warranty. All product warranties
are limited to material and workmanship.
Warranty
This warranty is provided in goodwill and extends only to the original purchaser of the IMS EP Installer’s Choice product – it is non-
transferable. This warranty is automatically void if your Installer’s ChoiceTM product is modied in any way - improperly installed,
extended beyond its stated weight capacity or otherwise misused or abused. This warranty cannot be transferred over or extended
to anyone other than the initial purchaser. The 5 Year Warranty for all mount and related mount products is void if the mount is
moved from its initial installation.
To the absolute maximum extent permitted by applicable law, Installer’s ChoiceTM disclaims any other warranties, express or
implied, including warranties of tness for a particular purpose and warranties of merchantability. Installer’s ChoiceTM will not be
liable for any damages whatsoever - arising out of the use or inability to use its products, even if Installer’s ChoiceTM has been
advised of the possibility of such damages. To the maximum extent permitted by applicable law, Installer’s ChoiceTM disclaims any
responsibility for incidental or consequential damages.
Please read INSTALLERS CHOICETM Wall Mount Instructions
BEFORE Installation
2
WARNING
3260WMIM1.1

l
+
5/32"
A
J
C
F
D E
I H G
3/8"
B
3
TOOLS REQUIRED
MOUNTING HARDWARE
3
4
5
6
7
8
9
10
11
12
1
2
15
16
17
18
19
20
21
22
23
24
14
13
M4 LOCK WASHER (4) M5 LOCK WASHER (4)
M5 X 12 (4)
M5 X 25 (4)
M5 X 40 (4)
M8 LOCK WASHER (4)
M8 X 12 (4)
M8 X 25 (4)
M8 X 40 (4)
M4 X 12 (4)
M4 X 25 (4)
M4 X 40 (4)
M6 LOCK WASHER (4)
M6 X 12 (4)
M6 X 25 (4)
M6 X 40 (4)
4MM HEX DRIVER (1) 1/4” LONG SPACER (4)
5/8” LONG SPACER (4)
3/4” LONG SPACER (4)
# 8 WASHER (4)
# 8-32 X 1/2” SCREW (2)
NYLON TWIST
ANCHOR (4)
1/4” X 2-3/8” WALL
PLATE BOLT (4)
3260WMIM1.1

4
A
1X
B C
1X 1X
3260WMIM1.1

5
E
D
A
J
H
F
A
(4) 3/8"X3"
MINIMUM
9
B
21
10
B
1
4
INSTALL WALL PLATE
2
3
WARNING: DO NOT
DRILL INTO MORTAR JOINT
CONCRETE, BRICK OR
CONCRETE BLOCK WALL
CONSTRUCTION
3260WMIM1.1

6
5/8" MAX
16”
E
D
A
J
(4)
5/32" X 3"
MINIMUM
I
21
F
A
10
INSTALL WALL PLATE
1
2
3
2X4 OR 2X6 WOOD STUD
AND DRYWALL CONSTRUCTION
3260WMIM1.1

7
FLAT MOUNTING
SURFACE
*
**
*
IRREGULAR/OBSTRUCTED
MOUNTING SURFACE
ATTACH ARMS
*HARDWARE MUST BE SELECTED FROM ITEMS 1-8 AND 13-20 ON PAGE 3 IN THE MOUNTING HARDWARE
SECTION. CARE MUST BE TAKEN IN CHOOSING HARDWARE COMPATIBLE WITH YOUR TELEVISION SET, OR
RISK CAUSING DAMAGE!!!!
**SPACER MUST BE CHOOSEN FROM ITEMS 22-24
3260WMIM1.1
* HARDWARE MUST BE SELECTED FROM ITEMS 1-8 AND 13-20 ON PAGE 3 IN THE MOUNTING
HARDWARE SECTION. CARE MUST BE TAKEN IN CHOOSING HARDWARE COMPATIBLE WITH YOUR
FLAT PANEL DISPLAY, OR RISK CAUSING DAMAGE!!!
** SPACER MUST BE CHOSEN FROM ITEMS 22-24

8
G
12
1
2
G
3260WMIM1.1

9
0 -15
TILT FUNCTION
ON IC32T/IC60T ONLY
12
43
Installer’s ChoiceTM by IMS EP Designed & Manufactured in the U.S.A.
1 Innovation Drive • Des Plaines, IL 60016
Ph. [phone] • Fax [phone] • www.installerschoice.com
3260WMIM1.1