Inalto ICC302K.1 User manual

MODEL/ICC302K.1 WWW.INALTO.HOUSE
QUICK START GUIDE V1.1
30cm Ceramic
Cooktop
FEATURES
2 Cooking Zones, 9 Power Levels,
Front Knob Controls, Residual Heat Indicators,
Durable Ceramic Glass

MODEL/ICC302K.1 WWW.INALTO.HOUSE
QUICK START GUIDE V1.1
YOUR COOKTOP
Congratulations on your new
InAlto 30cm Ceramic Cooktop!
SUPPORT
Telephone: [phone]
Email: [e-mail]
DETAILS
Dimensions (W, D, H mm): 288 × 520 × 55
Built-in Dimensions (W, D mm): 268 × 490
Warranty: 3 Years (2 + 1 on registration)
USING YOUR COOKTOP
To Start Cooking:
1. Place a suitable pan on the cooking zone that you
wish to use.
Make sure the bottom of the pan and the surface
of the cooking zone are clean and dry.
2. Use the knob control for your desired cooking zone
and turn it to your required temperature. This can
be adjusted at anytime during cooking.
To Finish Cooking:
1. Turn the knob control dial to the “OFF” position.
When the glass plate is hot, the residual heat indicator
will be lit. Don’t touch the glass plate until the
indicator goes out. It can also be used as an energy
saving function if you want to heat further pans, use
the hotplate that is still hot.
GENERAL USE TIPS
• Do not use cookware with jagged edges or a
curved base.
• Make sure that the base of your pan is smooth,
sits flat against the glass, and is the same size as
the cooking zone. Always centre your pan on the
cooking zone.
• Always lift pans o the ceramic cooktop – do not
slide, or they may scratch the glass.
Legend
1. Zone B Max. 1200 W zone
2. Zone A Max. 1800 W zone
3. Glass plate
4. Knob Controls
1
2
4
3