
INDUSTCOM TECHNOLOGY LIMITED
E: info@industcom.com
T: +86 755 2981 3939
Advance Programming
Setup by local keypad or by phone calls when the call gets through. Note: All the
commands as below table. Settings must begin with programming password.
Program parameter (Program max call time)
Data value (Max call time 5mins)
Change programming password, where ?= 4 digits
Reset programming password to default 9999
Max call time, where ?= 0-255 mins, 0=no limit
Hear DTMF tone twice "Di Di" for valid operation; Silence means invalid
operation.
Additional
programming options:
Setting flash time(when you press "R" button), where ?
= 100-900MS
Setting up to dial the specified number every few days,
where ?= 1-9, 0 means closing this function
Setting the number to call every few days, where ?= 3-
16 digits
Setting the duration of calls made every few days,
where ?= 0-99s, to make sure the number you set up is
online