infantech Zooby 1001W-GD User manual

INSTRUCTION MANUAL
z
zo oo ob by y ™ CAR AND HOME
W
Wi iF Fi i
DIRECT B
Thank you for purchasing Infanttech’s zooby™wifi
car and home
unique monitor allows parents to safely operate a vehicle by reducing the need to turn around
while driving. Your zooby
™ will allow you to monitor your baby
backwards in a rear passenger seat.
This versatile monitor can be used at home
can take it with you wherever you go. Additionally, your
zooby
your baby becomes a toddler and is facing forward in the rear passeng
digital Wifi direct video camera installed in a soft
plush that can be secured in various
locations in the backseat that easily connects to
your phone or tablet
adapter charger and cell phone mount. The camera is
equipped with a rechargeable battery.
Please note, that use of the zooby wifi
™ does not replace a driver’s need to obey all
traffic and safety laws and use reasonable safety precautions while driving to minimize
distracted driving.
CAUTION:
KEEP SMALL PARTS OUT OF CHILD’S REACH
[Model numbers
100
1001W-UN]
PLEASE READ THE FOLLOWING
INSTRUCTIONS AND WARNINGS
CAREFULLY BEFORE USING YOUR
ZOOBYW Wi iF Fi i™
BABY MONITOR. KEEP THIS
INSTRUCTION MANUAL FOR FUTURE
For Tech
nical Support call
suppor
For use with Children from birth to toddlers.
Adult installation required.
Exercise Care when unpacking and assembling product.
*
Plush style may vary
.
*
Smart Device not included
INSTRUCTION MANUAL
DIRECT B
ABY MONITOR
car and home
video baby monitor. This
unique monitor allows parents to safely operate a vehicle by reducing the need to turn around
™ will allow you to monitor your baby
while he or she is facing
This versatile monitor can be used at home
, and you
zooby
wifi™ can also be used when
your baby becomes a toddler and is facing forward in the rear passeng
er seat. This unit is a
plush that can be secured in various
your phone or tablet
, with a convenient car
equipped with a rechargeable battery.
™ does not replace a driver’s need to obey all
traffic and safety laws and use reasonable safety precautions while driving to minimize
KEEP SMALL PARTS OUT OF CHILD’S REACH
100
1W-GD; 1001W-ZB; 1001W-SG;
PLEASE READ THE FOLLOWING
INSTRUCTIONS AND WARNINGS
CAREFULLY BEFORE USING YOUR
BABY MONITOR. KEEP THIS
INSTRUCTION MANUAL FOR FUTURE
REFERENCE.
nical Support call
email us at
suppor
[e-mail].
For use with Children from birth to toddlers.
WARNING:
Adult installation required.
Exercise Care when unpacking and assembling product.
FCC ID:2ABHX-AIV1001W IC:11616A-AIV1001W
(FCC/IC ID label,refer to Page 3 )

WARNING:
THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT
SUPERVISION AND VEHICLE DRIVING.
•Test camera before first use, periodically, and when changing location of the
unit.
•Prevent distracted driving- before you are ready to start your vehicle, make
sure you have adjusted all of your vehicle’s options such as seats, mirrors,
seatbelts, and the position of the camera of the zooby™ facing your child, etc.
•Prevent Cord entanglement- do not place any cords within arm’s reach of baby.
Never use extension cords with AC adapters. Only use the AC Adapters
provided.
•When an AC Adapter is plugged into an electrical outlet, do not touch the
exposed end.
•Do not use camera near water.
•Keep camera away from heat sources and make sure there is proper
ventilation.
•THIS PRODUCT IS NOT A TOY. DO NOT ALLOW CHILDREN TO PLAY WITH IT.
NOT INTENDED FOR CHILD’S PLAY.
BATTERY WARNING:
•Do not Mix old and new batteries.
•Do not mix alkaline, standard, or rechargeable batteries.
•Remove batteries and unplug the rechargeable battery pack when product is
stored for a long period of time or when batteries are exhausted.
•Dispose of exhausted batteries properly.
•Use only the original rechargeable battery pack. Warranty is void if other
batteries are used. Please contact Infanttech for a replacement battery, contact
information can be found at the end of the instruction booklet.
CAUTION:
KEEP SMALL PARTS OUT OF CHILD’S REACH
1

FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Industry Canada (IC) Compliance Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Industrie Canada (IC) Déclaration de conformité
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
CAUTION: Changes or modifications not expressly approved by infanttech will void
the users’ authority to operate this equipment.
To comply with FCC RF exposure compliance requirements, A separation distance
of at least 20 cm must be maintained between the antenna of this device and all
persons.
NOTE: This equipment has been tested and found to comply with the limits for a
Class Bdigital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio reception, which can be determined by
turning the equipment on and off, the user is encouraged to correct the interference
by one or more of the following measures:
•Reorient or relocate the receiving antenna (monitor)
•Increase the separation between the equipment and the receiver
•Connect the equipment into a different circuit from that to which the receiver
is connected.
•Consult the dealer or an experienced radio/TV technician for help.
NOTE: Use only the original rechargeable battery or approved battery replacement.
Warranty void if other batteries are used. Please contact infanttech for replacement
battery, contact information can be found at the back of the instruction booklet.
2

QUICK REFERENCE FOR DAILY OPERATION:
After your initial set up (see instructions below), follow these easy steps for optimal
performance of your zooby monitor:
In the car:
1. Always use the safety buckle straps and velcro of the plush camera and adjust to fit
snugly on any headrest posts the plush camera is mounted on. Note: If the arms are
still loose after adjusting straps on the posts, you can wrap the plush arms around the
headrest posts at least once on each side and then use the buckle to tighten up your
fit.
2. When you place your baby/toddler in the backseat, turn on the camera in the plush at
the bottom by opening the velcro enclosure and holding the power button until the
light turns green. Reattach the velcro.
3. The mobile device will display the images from the camera. Adjust the camera in the
plush for the view you like by moving the bendi-neck inside the plush.
4. When exiting the vehicle, turn off the camera in the plush when taking your baby out
of the vehicle. This will ensure optimal battery life and performance.
5. Remember to charge camera as needed. If your vehicle is equipped with cigarette
lighter or power outlets, you can charge your camera. Note: the camera in the plush
may be charged in the vehicle when your child is not in the car. When your unit is
fully charged, the "red" charging light will turn off.
3
FCC/IC label location :

QUICK REFERENCE FOR DAILY OPERATION
(Continued):
On the Go:
1. Simply unwrap and unbuckle the camera from the headrest posts of your vehicle.
2. Unclip your smart device from the bracket and carry your zooby wifi with you.
3. When you step inside any home you are visiting, simply place the camera plush
pointing towards the location you want to view. Keep the smart device with you or
place it in a location where you can view the screen.
4. Now your baby is Always in View while visiting a friend or even at Grandma's house.
At Home:
1. Find optimal location for the camera. (If using in the nursery, do not place the camera
in the crib. Any cables must be at least 3 feet away from your baby).
2. Place camera where you want to view your baby.
3. Keep smart device with you; adjust your volume as needed.
4. Now keep peace of mind that your baby is Always in View.
4

FEATURES AND COMPONENTS:
Cell phone bracket:
Camera Plush (Front View):
Camera Mounted in Nose
so you can see your child
Internal Bendineck
technology for optimal
vie ing positioning
Super Velcro and safety
buckle straps on Pa s for
ease of mounting
5
Suction Cup Mount on
cell phone Bracket
Spring
-
loaded
Cell phone
mounting clip
Suction cup locking
mechanism

FEATURES AND COMPONENTS (Continued):
Camera Plush (bottom View):
Battery Pack inside the Plush:
Velcro
to access Charging Port
and Battery Pack
Po er Indicator LED
USB Charging Port
Push ON/Off
Button
6

ACCESSORIES:
1-Port USB Car Charger (1)
8Ft USB Cables (1 of Each)
Mobile phone car holder
NOTE: Style and designs may vary from pictures
Contents:
1-Plush with Camera
1- 1500Mah Lithium ion Battery (in plush camera)
1- Cell Phone car holder with suction cup mount
1-USB Charging cable for plush
1- 1-Port USB car adapter
1- USB AC wall adapter
1- Instruction Manual
(1)
AC adapters (1)
Mobile phone car holder
(1)
NOTE: Style and designs may vary from pictures
7

SET UP & USE:
First time setup
Step 1: Download the free Infanttech zooby app and turn on camera by pushing
ON/OFF button
Step 2: Go to the WiFi Settings on your mobile device and connect to the plush
camera's WiFi SSID: InfantTech_XXXXXX (Wi-Fi direct mode). The default
password is“00000000”
Step 3: Launch app. For first time use, you must change password to increase
security.
Click “SETUP”.
Step 4: After password is changed, please turn off plush camera and then turn on.
Now, re-connect your mobile device to camera's Wi-Fi with new password.
Note: Your mobile may remember previous password. You need to “forget” previous
setting and re-connect Wi-Fi SSID with new password.
8

SET UP & USE (Continued):
For the following use
Step 1: Go to Setting>WiFi. Now Search for InfantTech_XXXXXX and Connect
your mobile phone to plush camera via Wi-Fi (Wi-Fi direct mode) using new
password.
Step 2: Launch app.
App Icon Legend
Note Melody selection icons
No melody melody1 melody2 melody3 loop melody 1,2,3
9

SET UP & USE FOR CAR:
Mobile: (Mobile device not included)
Step 1: Attach the cell phone holder
to the windshield of the car in a secure location
that does not obstruct your view.
We recommend
the driver’s windshield. (
only place it in a location allowed by law so that it
doesn’t interfere with vision.)
Step 2: unvelcro bottom of plush and
push On/Off button for
release - green light will turn on. Reclose velcro.
Step 3: Once the camera and mobile device are on,
open the app
will show on the mobile device. Meanwhile, the
mobile device
from the camera.
to the windshield of the car in a secure location
We recommend
the lower left corner of
only place it in a location allowed by law so that it
push On/Off button for
2-3 seconds and
open the app
. Signal strength
mobile device
can receive the video
10
Push
On/Off
button

SET UP & USE FOR CAR
(Continued)
Camera in Plush: (Charge for 6-8
hours prior to first use):
For rear facing
seat installation for Infants
Step 4:
Wrap plush’s arms around the backseat headrest
and attach palms together with the Velcro
and attach the safety buckle straps and
pull for a snug fit around the headrest posts.
Push headres
For forward facing
seat installation for toddlers
Step 4:
Wrap plush’s arms around the front passenger’s seat headrest posts in
front of the toddler car seat
and attach palms together with V
safety buckle straps and pull for a snug fit around the headrest posts.
down.
For both rear and forward facing installation.
ALWAYS
ensure the camera will stay in place. Note-
due to differences in headrest post
width, Velcro use may not be possible. The buckle straps should always fit.
(Continued)
:
hours prior to first use):
seat installation for Infants
:
Wrap plush’s arms around the backseat headrest
posts in front of car seat
and attach the safety buckle straps and
Push headres
t down.
seat installation for toddlers
:
Wrap plush’s arms around the front passenger’s seat headrest posts in
and attach palms together with V
elcro. Attach the plastic
safety buckle straps and pull for a snug fit around the headrest posts.
Push headrest
ALWAYS
use the buckle straps to
due to differences in headrest post
width, Velcro use may not be possible. The buckle straps should always fit.
11

SET UP & USE FOR CAR (Continued)
Step 5: Adjust plush’s head by flexing the internal
bendi
Step 6: B
efore
you are ready to drive, make sure you have adjusted all of your vehicle’s
options such as seats, mirrors, seatbelts, and the position of the camera in the plush facing
your child.
Rear Facing or
Forward Facing
Step 7: Drive safely and with quick glances knowing
that your child is
see something in the mobile device
that alerts you to attend to your child, continue to
follow safe driving practices, and cal
mly and safely pull off the road.
SET UP & USE FOR CAR (Continued)
:
bendi
-neck for optimal viewing.
you are ready to drive, make sure you have adjusted all of your vehicle’s
options such as seats, mirrors, seatbelts, and the position of the camera in the plush facing
Forward Facing
that your child is
Always In View. If you
that alerts you to attend to your child, continue to
mly and safely pull off the road.
12

SET UP & USE FOR HOME:
1. Find optimal location for the camera.
a. Ideally, find a location that will be close to an electrical outlet for charging
purposes.
b. Note: If using in the nursery, do not place the camera in the crib. Any
cables must be at least 3 feet away from your baby.
2. Place camera where you want to view your baby anywhere in your home.
3. Keep mobile device with you and turn up sound.
4. Now keep peace of mind that your baby is Always In View
Camera in nursery dresser Mobile device screen view
SET UP & USE ON THE GO:
SEE PAGE 4- QUICK REFERENCE FOR DAILY OPERATION, ON THE GO USE.
13

BATTERY CHARGING:
Camera
Connect USB adapter to the camera, the light will be red. Once charging is
complete, the RED light will turn OFF. Therefore if you see no light, your
camera is fully charged
Charging Tips:
•Charge both the plush and the monitor fully before use. Recommended
6-8 hours for initial charge.
•Drain your battery once a month and then charging it back to full
power.
•For regular use begin charging when battery has at least 5% power
left.
•Remove battery from plush when not in use for long period of time.
(over one month, you will need a Phillips screw driver to take out the
battery from the battery pack inside the plush.)
PROBLEM SOLVING:
Infrared (IR) Lighting
•In the dark, the IR lights will automatically work, but IR lights do not
provide light.
Plush Camera won’t stay put or constant camera repositioning
•Make sure you have adjusted the buckle straps for a tight fit. If it is still
loose, wrap the plush arms on the actual post of the headrest once on
each side and then use the buckle. The camera bendi-neck will adjust
after some use so that repositioning will be minimal.
Static
• Make sure the battery is fully charged.
14

PROBLEM SOLVING (Continued):
Flickering Image on App
•Make sure mobile device and camera are moved away from other
wireless devices (i.e. Wi-Fi, Bluetooth, GPS, etc).
•Make sure there are no lights directly facing the camera or in the
vicinity of the camera
Weak reception or no reception
•Make sure both plush camera and mobile device are turned on.
•Make sure batteries are charged in the plush camera
Accidentally held the camera power button too long
•wait until flashing green light becomes solid green (about 6-8 seconds)
•hold down the power button for 2-3 seconds and release (this will turn
off the unit)
•Now hold down the power button for 2-3 seconds and release (now
this will turn the unit back on) NOTE the green light will not turn on
or off while holding own the power button
NOTE: Make sure both your mobile device and the camera are fully
charged for optimal performance. See www.infanttech.com for more
troubleshooting tips.
15

PROBLEM SOLVING (Continued):
Troubleshooting tips for the Wi-Fi connections
1. If you can not see plush camera SSID such as InfantTech_XXXXXX, you
need to check if the plush camera as turned on correctly or the
battery po er as lo and need to be charged.
2. After you changed pass ord in SETUP page (for Wi-Fi), you may not
be able to re-connect SSID InfantTech_XXXXXX as belo .
You need to “forget” or remove original setting and re-connect SSID
InfantTech_XXXXXX ith ne pass ord.
16
Click Here to get to
"Forget" Menu
Click
"Forget"

If you experience a problem that is not noted in this manual, please visit
www.infanttech.com for more troubleshooting tips. For more information, please
contact us via email 24 hours a day at [e-mail].
Infanttech warranty Policy
Infanttech will repair or replace your unit free of charge for 90 days from the date of
purchase if the unit is defective in workmanship or materials. Customer covers shipping
to infanttech warehouse. To claim your repair/replacement, the product must be
returned to Infanttech along with a copy of the original purchase receipt. In the absence
of the purchase receipt, the warranty will be 6 months from the date of manufacture. Please
visit www.infanttech.com to register your product.
Void Warranty :
This warranty does not apply to normal wear or damage from misuse, removal or tampering
of serial numbers, abuse, improper storage and handling, installation, accident, unauthorized
repair or alteration or units purchased through an unauthorized vendor. Visit
www.infnattech.com Terms and Conditions for a list of unauthorized vendors. If possible,
Infanttech can replace or repair unit for a fee.
For most recent manual visit www.infanttech.com
Infant
t
ech
515 W Whittier Blvd
Montebello, CA 90640
© 2012-18 Infanttech Solutions, Inc.
Please retain information for future
reference. Color and styles may vary.
DESIGNED IN CALIFORNIA
MADE IN CHINA

MANUAL DE INSTRUCCIONES
z
zo oo ob by y ™ CAR AND HOME
W
Wi iF Fi i
DIRECT B
Gracias por su compra del zoobyW Wi iF Fi i™
video baby monitor
Infanttech. Este monitor de características únicas permite que los padres puedan mejorar la
seguridad al conducir vehículos, dado que reduce la necesidad de voltearse para mirar hacia
atrás mientras se está al volante.
Este monitor versátil se puede
llevar con usted dondequiera que vaya. Su monitor
zooby
bebé
mientras su bebé está sentado en una silla para bebés en el asiento trasero del
vehículo, con el bebé mirando hacia atrás. Además
, su monitor
utilizar cuando el bebé ya empieza a caminar y se sienta mirando hacia adelante en la silla
para bebés en el asiento trasero. El monitor zoobyW Wi iF Fi i
™ consta de una unidad de video
digital del conductor que se fija fácilm
ente al parabrisas de cualquier vehículo, de un
adaptador de recarga y de una cámara incorporada a un lindo peluche
colocar en diversos lugares del asiento trasero. Tanto la unidad del conductor como la
cámara están provistas de baterías recargables.
Tenga presente que el uso del monitor zooby
™ no sustituye la exigencia del
cumplimiento por parte del co
nductor de todas las leyes de tránsito y de las normas
de seguridad, y la aplicación de precauciones razonables de seguridad destinadas a
reducir al mnimo las distracciones mientras conduce.
PRECAUCIÓN:
[Modelos 1001W-GD
; 100
POR FAVOR, LEA CUIDADOSAMENTE LAS INSTRUCCIONES Y
ADVERTENCIAS A CONTINUACIÓN ANTES DE UTILIZAR SU
MONITOR DE BEBÉS
ZOOBY
MANUAL DE INSTRUCCIONES PARA CONSULTAS EN EL
FUTURO.
P r recibir sistenci técnic , ll me l tel
2983] o escríb nos
Para usarse con bebés desde su nacimiento hasta que
empiecen a caminar.
ADVERTENCIA:
Un adulto debe instalar el monitor.
Sea cuidadoso al desempacar y
* Estilo de felpa puede variar.
* Dispositivo inteligente
no incluido
MANUAL DE INSTRUCCIONES
DIRECT B
ABY MONITOR
video baby monitor
for car, home, and on the go de
Infanttech. Este monitor de características únicas permite que los padres puedan mejorar la
seguridad al conducir vehículos, dado que reduce la necesidad de voltearse para mirar hacia
Este monitor versátil se puede
utilizar en casa, y se puede
zooby
W
Wi iF Fi i™ le permite estar atento a su
mientras su bebé está sentado en una silla para bebés en el asiento trasero del
, su monitor
zooby™ también se puede
utilizar cuando el bebé ya empieza a caminar y se sienta mirando hacia adelante en la silla
™ consta de una unidad de video
ente al parabrisas de cualquier vehículo, de un
adaptador de recarga y de una cámara incorporada a un lindo peluche
suave que se puede
colocar en diversos lugares del asiento trasero. Tanto la unidad del conductor como la
™ no sustituye la exigencia del
nductor de todas las leyes de tránsito y de las normas
de seguridad, y la aplicación de precauciones razonables de seguridad destinadas a
PRECAUCIÓN:
; 100
1W-ZB; 1001W-SG; 1001W-UN]
POR FAVOR, LEA CUIDADOSAMENTE LAS INSTRUCCIONES Y
ADVERTENCIAS A CONTINUACIÓN ANTES DE UTILIZAR SU
ZOOBY
W
Wi iF Fi i™. CONSERVE ESTE
MANUAL DE INSTRUCCIONES PARA CONSULTAS EN EL
FUTURO.
P r recibir sistenci técnic , ll me l tel
éfono [855-422-
2983] o escríb nos
[e-mail].
Para usarse con bebés desde su nacimiento hasta que
empiecen a caminar.
ADVERTENCIA:
Un adulto debe instalar el monitor.
Sea cuidadoso al desempacar y
ensamblar el producto.
FCC ID:2ABHX-AIV1001W IC:11616A-AIV1001W

MANTENGA TODA PIEZA PEQUEÑA FUERA DEL ALCANCE DE LOS NIÑOS
ADVERTENCIA:
ESTE PRODUCTO NO SUSTITUYE LA SUPERVISIÓN Y LA
CONDUCCIÓN RESPONSABLES POR PARTE DE UN ADULTO
•Pruebe el monitor antes de utilizarlo por primera vez, y también
periódicamente y al cambiar de posición cualquiera de las unidades.
•Evite las distracciones al conducir. Antes de proceder a poner en marcha su
vehículo, asegúrese de haber ajustado todas las opciones de su vehículo,
como la posición de los asientos, de los espejos, el uso de los cinturones de
seguridad, la correcta posición de la cámara zooby™ frente al bebé y otros.
•Evite que el bebé se enrede en los cables: nunca deje cables a su alcance.
Nunca utilice cables de extensión con adaptadores de CA. Utilice
exclusivamente los adaptadores de CA suministrados.
•Cuando enchufe un adaptador de CA a un tomacorriente, nunca toque el
extremo que queda al descubierto.
•No utilice el monitor cerca del agua.
•Mantenga el monitor alejado de toda fuente de calor, y asegúrese de que
cuente con la ventilación adecuada.
•ESTE PRODUCTO NO ES UN JUGUETE. NO DEJE QUE NIÑOS JUEGUEN CON
ÉL. SU DISEÑO NO PREVÉ EL USO COMO JUGUETE.
ADVERTENCIA DE LA BATERÍA:
•Nunca mezcle baterías nuevas y viejas.
•Nunca mezcle baterías de distintos tipos (alcalinas, estándar y recargables).
•Cuando vaya a guardar el monitor durante un período prolongado de tiempo, y
también cuando las baterías estén descargadas, extraiga de las unidades las
baterías.
•Deseche las baterías adecuadamente.
•Utilice exclusivamente el paquete original de baterías recargables La garantía
quedará anulada si se utilizan otras baterías. Comuníquese con Infanttech
cuando necesite baterías de reemplazo. La información de contacto se puede
encontrar al final del folleto de instrucciones.
PRECAUCIÓN:
MANTENGA TODA PIEZA PEQUEÑA FUERA DEL ALCANCE DE LOS NIÑOS
1