InFocus LP610 User manual

Installation Guide
LitePro 600 Series
Ceiling Mount
Installation Guide
LitePro 600 Series
Installationhandbuch zur
Deckenbefestigung
English. . . . . . . . page 1
Deutsch . . . . . page 13
010-0132-02-eng-ger.fm Page -1 Monday, March 31, 1997 11:23 AM

010-0132-02
Copyright © 1997 by In Focus Systems, Inc.
Wilsonville, Oregon. All rights reserved..
Copyright © 1997 by In Focus Systems, Inc.
Wilsonville, Oregon, USA. Alle Rechte vorbehalten.
010-0132-02-eng-ger.fm Page 0 Monday, March 31, 1997 11:23 AM

1
CEILING MOUNT INSTALLATION GUIDE
The LitePro 600 Series LiteMountTM makes it easy
to hang your LitePro from the ceiling for fixed
installation use in meeting, auditorium and
training room settings.
WARNING: This installa-
tion must be performed in
compliance with your
local building code require-
ments. Local require-
ments take precedence
over any instructions given
in this guide.
You must determine the suitability of this prod-
uct for your intended use and assume all risk
and liability in connection therewith. In Focus
recommends that a professional contractor or
other facilities professional assist you in mount-
ing this device. Be sure to take precautions to
meet all local building codes.
Additional LiteMount Products
In Focus offers two additional LiteMount prod-
ucts that may make your ceiling mount installa-
tion easier.
•The LiteMount False Ceiling Plate
(SP-LTMT-PLT) is designed for suspended ceil-
ings with acoustic tiles. It mounts in your ceil-
ing in place of a ceiling tile. It is pre-drilled
with holes to install the LiteMount brackets.
•The LiteMount Pipe Tubing Extension (SP-
LTMT-EXT) allows you to install the projector
in a room with a high ceiling. With the exten-
sion, you can place the projector from 12”
(30.5) to 46” (117 cm) from the ceiling.
Contact your In Focus dealer to order these
products.
Placing the Projector
To ensure that the projected image is not dis-
torted, the projector must be installed so that the
center of the lens is at the same height as the top
of the projection screen.
010-0132-02-eng-ger.fm Page 1 Monday, March 31, 1997 11:23 AM

Placing the Projector
2
The distance from the projector lens to the screen
determines the size of the projected image. Refer
to the Appendix of the LitePro User’s Guide for
charts and tables showing these measurements.
Figure 1 shows an example of a proper LitePro
600 LiteMount installation. The room in this
example has a high ceiling, so the projector is
mounted on the LiteMount Pipe Tubing Exten-
sion. Note that the projector’s lens is at the same
height as the top of the projection screen.
FIGURE 1
Ceiling-Mounted LP600 Series Projector
010-0132-02-eng-ger.fm Page 2 Monday, March 31, 1997 11:23 AM

3
Contents
The LitePro 600 Series Ceiling Mount package
contains:
1Installation Guide
2ceiling mount base box
3projector mounting bracket
4hardware for installing the projector mount-
ing bracket on the projector:
•four (4) 10/32 x 3/8” Phillips-head screws
with washers
5hardware for installing the projector (with
mounting plate) to the base box in the ceiling:
•two (2) 8mm hinge pin bolts
•two (2) 10mm black spacers
•two (2) 8mm washers
•four (4) 6mm slotted angle locking bolts
010-0132-02-eng-ger.fm Page 3 Monday, March 31, 1997 11:23 AM

Install the Ceiling Mount Base Box on the Ceiling
4
Install the Ceiling Mount Base Box on the
Ceiling
WARNING: The ceiling
structure must be able to
support at least 5 times
the weight of the projector
and mounting hardware. If
not, it must be reinforced
according to your local
building codes.
Instructions for installing the ceiling mount on
the LiteMount Flase Ceiling Plate and the Lite-
Mount Pipe Tubing Extension are given in this
installation guide. If you have not purchased
either of these products, consult a professional
contractor or other facilities professional to
ensure a safe installation.
Please refer to the LiteMount False Ceiling Plate
and LiteMount Pipe Tubing Extension installa-
tion instructions for lists of included hardware.
1Center the ceiling mount base box on the ceil-
ing plate as shown in Figure 2.
2a LiteMount False Ceiling Plate - Align the
holes in the base box with the threaded studs
on the plate. Install the 4 washers and nuts as
shown in Figure 2.
NOTE: Refer to the
installation instructions
that came with the
LiteMount False Ceiling
Plate and the LiteMount
Pipe Tubing Extension for
important additional
information.
2b LiteMount Pipe Tubing Extension - Line up
the holes in the base box with the holes in the
plate at the end of the pipe extension. Install
the hardware as shown in Figure 3.
010-0132-02-eng-ger.fm Page 4 Monday, March 31, 1997 11:23 AM

5
3Place the ceiling plate or pipe extension in the
ceiling so that the base box hangs down into
the room.
WARNING: The cables
are not rated for use in
air-handling plenums. If
the dropped ceiling is an
air-handling plenum, the
cables should be installed
within conduit.
4Route the projector’s cables through your
ceiling and out the hole in the ceiling
(Figure 6).
NOTE: When the projec-
tor is mounted on the ceil-
ing from the LiteMount
False Ceiling Plate, it
descends 12.25 inches
(31 cm) from the ceiling.
FIGURE 2
Install the base box to the LiteMount False Ceiling Plate
010-0132-02-eng-ger.fm Page 5 Monday, March 31, 1997 11:23 AM

Install the Ceiling Mount Base Box on the Ceiling
6
FIGURE 3
Install the base box to the LiteMount Pipe Tubing Extension
010-0132-02-eng-ger.fm Page 6 Monday, March 31, 1997 11:23 AM

7
Attach the Mounting Plate to the LitePro
1Set the LitePro on its side on a table. Align the
4 holes in the mounting plate with the holes
in the bottom of the projector (Figure 4).
CAUTION: Use only the
hardware that is provided
with the LitePro 600
Series Ceiling Mount.
Using different hardware
may damage the projector.
2Install the 4 screws.
FIGURE 4
Attach the mounting plate to the projector
010-0132-02-eng-ger.fm Page 7 Monday, March 31, 1997 11:23 AM

Hang the LitePro on the Ceiling
8
Hang the LitePro on the Ceiling
1Assemble the hinge pin bolts, washers and
spacers to each side of the base box as shown
in Figure 5. Be sure to place the flat side of the
black spacers towards the base box. Do not
tighten the bolts at this time, leave them very
loose.
NOTE: One surface of
the black spacers
appears to be flat, but it is
actually slightly concave.
When you hang the
projector on the base box,
be sure the concave side
of the spacer is towards
the base box.
FIGURE 5
Attach hinge pin bolt, washer and spacer to the side of the
base box
2Carefully lift the projector and turn it upside
down so the mounting plate faces the ceiling.
3Slide the slot openings of the mounting plate
onto the hinge pins in the base box. Make
sure the mounting plate is between the black
spacers and the base box (Figure 5).
4Slide the projector until the hinge pin bolts
rest fully at the end of the slots and support
the projector.
5Insert the angle locking bolts (6mm slotted
bolts), two on each side of the base box (Fig-
ure 6). Hand-tighten them.
black spacer
silver washer
slide projector
bracket here between
the base box and the spacer
010-0132-02-eng-ger.fm Page 8 Monday, March 31, 1997 11:23 AM

9
6Adjust the angle of the projector so that it will
project correctly.
7Tighten the hinge pin bolts and the 4 angle
locking bolts to secure the projector in posi-
tion.
8Check all fasteners to make sure they are
properly tightened.
9Connect the power cord and the CableWizard
cables to the projector. (Refer to your LitePro
User’s Guide for information about connecting
the cables.)
FIGURE 6
Install the projector in the ceiling base box
angle locking bolt
hinge pin bolt
with washer
and spacer
010-0132-02-eng-ger.fm Page 9 Monday, March 31, 1997 11:23 AM

Inverting the Image
10
Inverting the Image
1Press the menu button on the remote or key-
pad to display the projector’s on-screen
menu.
2Using the disk mouse, move the cursor to the
Controls tab to display the Controls menu.
3Slide the cursor to the Ceiling Mount box.
4Click either of the two buttons below the disk
mouse to invert the image.
Replacing the Lamp Module
Remove the projector from the ceiling base box
to replace the lamp. Refer to the LitePro User’s
Guide for lamp removal instructions.
010-0132-02-eng-ger.fm Page 10 Monday, March 31, 1997 11:23 AM

Warranty Return Card
SP-CEIL-LM6
Date of Purchase
Name
Address
Phone Number
Projector Model
Reason for Return

Limited Warranty
In Focus Inc. warrants that each Ceiling Mount (“Product”) sold hereunder will conform to
and function in accordance with the written specifications of In Focus. Said limited war-
ranty shall apply only to the first person or entity that purchases the Product for personal or
business use and not for the purpose of distribution or resale. Said warranty shall continue
for a period of one (1) year from the date of such purchase. Proof of purchase is required for
all warranty claims. In Focus does not warrant that the Product will meet the specific
requirements of the first person or entity that purchases the Product for personal or business
use. In Focus’ liability for the breach of the foregoing limited warranty is limited to the
repair or replacement of the Product or refund of the purchase price of the Product, at In
Focus’ sole option. To exercise the Purchaser’s rights under the foregoing warranty, the
Product must be returned at the Purchaser’s sole cost and expense, to In Focus, and must be
protected by packaging comparable to the original packaging. The Product must be accom-
panied by the attached warranty card or a written letter that includes (i) proof of date of
purchase, (ii) the dealer’s name, and (ii) the part number of the accessory item or the projec-
tor/panel model number.
Warranty Limitation and Exclusion
In Focus shall have no further obligation under the foregoing limited warranty if the Prod-
uct has been damaged due to abuse, misuse, neglect, accident, unusual physical stress,
unauthorized modifications, tampering, alterations, or service other than by In Focus,
causes other than from ordinary use or failure to properly use the Product in the application
for which said Product is intended.
Disclaimer or Unstated Warranties
The warranty printed above is the only warranty applicable to this purchase. All other war-
ranties, express or implied, including, but not limited to, the implied warranties of mer-
chantability and fitness for a particular purpose are disclaimed. There are no warranties that
extend beyond the face hereof and the foregoing warranty shall not be extended, altered or
varied except by written instrument signed by In Focus.
Limitation of Liability
It is understood and agreed that In Focus’ liability whether in contract, in tort, under any
warranty, in negligence or otherwise shall not exceed the return of the amount of the pur-
chase price paid by purchaser and under no circumstances shall In Focus be liable for spe-
cial, indirect or consequential damages. The price stated for the product is a consideration in
limiting In Focus’ liability. No action, regardless of form, arising out of the agreement to
purchase the product may be brought by purchaser more than one year after the cause of
action has accrued.
010-0132-02-eng-ger.fm Page 11 Monday, March 31, 1997 11:23 AM

010-0132-02-eng-ger.fm Page 12 Monday, March 31, 1997 11:23 AM

13
INSTALLATIONSANLEITUNG FÜR DIE DECKENBEFESTIGUNG
Mit dem LiteMountTM der LitePro-Serie 600 kön-
nen Sie Ihren Projektor mühelos zur permanen-
ten Verwendung in Besprechungs-, Vortrags-
und Schulungsräumen an der Decke befestigen.
WARNUNG: Diese
Installation muß gemäß
den jeweils geltenden Bau-
vorschriften durchgeführt
werden. Die örtlichen Bau-
vorschriften haben Vor-
rang vor den Anleitungen
in dieser Unterlage.
Sie müssen die Eignung dieses Produkts für den
beabsichtigten Verwendungszweck überprüfen
und übernehmen das gesamte Risiko und die
volle Haftung in Zusammenhang mit diesem
Produkt. In Focus empfiehlt, daß Ihnen ein
Berufshandwerker bei der Befestigung dieses
Geräts behilflich ist. Vergewissern Sie sich, daß
alle örtlich geltenden Bauvorschriften beachtet
werden.
LiteMount-Zusatzprodukte
In Focus bietet zwei zusätzliche LiteMount-Pro-
dukte an, die die Installation der Deckenbefesti-
gung erleichtern.
•Die LiteMount-Zwischendeckenplatte (SP-
LTMT-PLT) ist für abgehängte Decken mit
Schallschutzfliesen vorgesehen. Sie wird an
der Decke anstelle einer Deckenfliese ange-
bracht und verfügt über vorgebohrte Löcher
zur Montage der LiteMount-Halterung.
•Mit der LiteMount-Rohrverlängerung (SP-
LTMT-EXT) können Sie den Projektor in einem
Raum mit einer hohen Decke installieren. Mit
Hilfe der Verlängerung können Sie den Pro-
jektor 30,5 bis 117 cm von der Decke entfernt
anbringen.
Diese Produkte können Sie bei Ihrem In Focus-
Händler bestellen.
010-0132-02-eng-ger.fm Page 13 Monday, March 31, 1997 11:23 AM

Plazierung des Projektors
14
Plazierung des Projektors
Um zu gewährleisten, daß das projizierte Bild
nicht verzerrt ist, muß der Projektor so installiert
werden, daß sich die Mitte des Objektivs auf der-
selben Höhe wie der obere Rand des Projektions-
schirms befindet.
Die Größe des projizierten Bildes hängt vom
Abstand des Projektorobjektivs zum Bildschirm
ab. Der Anhang im LitePro-Bedienerhandbuch ent-
hält Diagramme und Tabellen mit diesen Maßen.
ABBILDUNG 1
An der Decke befestigter Projektor der Serie LP600
010-0132-02-eng-ger.fm Page 14 Monday, March 31, 1997 11:23 AM

15
In Abbildung 1 wird ein Beispiel für die richtige
Installation des LiteMount der Serie LiePro 600
dargestellt. Der Raum in diesem Beispiel hat eine
hohe Decke, so daß der Projektor auf der Lite-
Mount-Rohrverlängerung befestigt wurde.
Beachten Sie, daß sich das Projektorobjektiv auf
derselben Höhe wie der obere Rand des Projekti-
onsschirms befindet.
Lieferumfang
Das Paket mit der Deckenbefestigung für Lite-
Pro-Projektoren der Serie 600 enthält folgendes:
1Installationsanleitung
2Deckenbefestigungssockel
3Projektor-Befestigungsbügel
4Befestigungsmaterial zur Anbringung des
Projektor-Befestigungsbügels am Projektor:
•vier (4) 10/32 x 3/8 inch Kreuzschlitz-
schrauben
5Befestigungsmaterial zur Anbringung des
Projektors (mit der Montageplatte) am Sockel
an der Decke:
•zwei (2) 8-mm-Gelenkbolzen
•zwei (2) schwarze 10-mm-Abstandshalter
•zwei (2) 8-mm-Unterlegscheiben
•vier (4) geschlitzte 6-mm-Winkelsperrbol-
zen
010-0132-02-eng-ger.fm Page 15 Monday, March 31, 1997 11:23 AM

Lieferumfang
16
Den Deckenbefestigungssockel an der Decke
montieren
WARNUNG: Die
Deckenstruktur muß
mindestens das fünffache
Gewicht des Projektors
und des
Befestigungsmaterials
tragen können. Ist dies
nicht der Fall, muß sie
entsprechend der örtlichen
Bauvorschriften verstärkt
werden.
Anweisungen für die Montage der Deckenbefe-
stigung auf der LiteMount-Zwischendecken-
platte und der LiteMount-Rohrverlängerung
sind in der vorliegenden Installationsanleitung
enthalten. Wenn Sie keines dieser beiden Pro-
dukte erworben haben, wenden Sie sich an einen
Berufshandwerker, um eine sichere Montage zu
gewährleisten.
Eine Liste der mitgelieferten Befestigungsteile
finden Sie in der Installationsanleitung zur Lite-
Mount-Zwischendeckenplatte.
Eine Liste der mitgelieferten Befestigungsteile
finden Sie in der Installationsanleitung zur Lite-
Mount-Rohrverlängerung.
1Legen Sie den Deckenbefestigungssockel mit-
tig auf die Deckenplatte, wie in Abbildung 2
gezeigt.
2a LiteMount-Zwischendeckenplatte - Richten
Sie die Löcher im Sockel an den Gewindestre-
ben auf der Platte aus. Montieren Sie die vier
Unterlegscheiben und Muttern, wie in Abbil-
dung 2 gezeigt.
HINWEIS: Lesen Sie
auch die
Installationsanleitungen,
die mit der LiteMount-
Zwischendeckenplatte
und der LiteMount-
Rohrverlängerung
geliefert werden, da diese
wichtige zusätzliche
Informationen enthalten.
2b LiteMount-Rohrverlängerung - Richten Sie
die Löcher im Sockel an den Löchern in der
Platte am Ende der Rohrverlängerung aus.
Montieren Sie die Befestigungsteile, wie in
Abbildung 3 gezeigt.
010-0132-02-eng-ger.fm Page 16 Monday, March 31, 1997 11:23 AM

17
3Montieren Sie die Deckenplatte bzw. die
Rohrverlängerung so an der Decke, daß der
Sockel in den Raum herabhängt.
4Führen Sie die Projektorkabel durch die
öffnung in der Decke (Abbildung 6).
WARNUNG: Die Kabel
sind nicht zur Verwen-
dung in Luftverteilerkä-
sten geeignet. Handelt
es sich bei der abgehäng-
ten Decke um einen
Luftverteilerkasten, soll-
ten die Kabel in einem
Kabelkanal verlegt wer-
den.
ABBILDUNG 2
Befestigung des Sockels an der LiteMount-Zwischendeckenplatte
HINWEIS: Wenn der
Projektor mit der Lite-
Mount-Zwischendecken-
platte an der Decke
befestigt wird, hängt er ca.
31 cm von der Decke
herab.
010-0132-02-eng-ger.fm Page 17 Monday, March 31, 1997 11:23 AM

Lieferumfang
18
ABBILDUNG 3
Befestigung des Sockels an der LiteMount-Rohrverlängerung
010-0132-02-eng-ger.fm Page 18 Monday, March 31, 1997 11:23 AM