Vivo MOUNT-JS1 User manual

Black Clamp-on Joystick Mount
Instruction Manual
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
https://vivo-us.com/products/mount-js1
SKU: MOUNT-JS1
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualied technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specied in this manual and do not exceed weight capacity. We cannot be liable for damage
or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING!
ASSEMBLY STEPS
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A(x2)
Clamp
B(x2)
Mount Support
D(x1)
Joystick Plate
STEP 1
Phillips
Screwdriver
TOOLS NEEDED
C(x1)
Throttle Plate
11lbs
(5kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
S-B (x6)
M6x12mm
Screw
S-A (x6)
M8x12mm
Screw
T-A (x1)
5mm Allen
Wrench
T-B (x1)
8mm Wrench
S-C (x4)
M4x10mm
Screw
S-D (x4)
M5x15mm
Screw
S-E (x4)
M5 Nut
Install Mount Supports (B) to Clamp (A) using M8x12mm Screws (S-A) and 5mm Allen Wrench (T-A). To
adjust the height, slightly loosen all M8x12mm Screws (S-A), move Mount Support (B) along the slot,
and then tighten screws at desired height.
B
A
S-A
T-A

3
STEP 2
Throttle Install
Assemble Throttle Plate (C) to Clamp (A) using M6x12mm Screws (S-B) and a Phillips screwdriver.
Install the throttle to Throttle Plate (C) using M5x15mm Screws (S-D), M5 Nuts (S-E), a Phillips screw-
driver, and 8mm Wrench (T-B).
Joystick Install
Remove the weighted base from the joystick following the manufacturer’s instructions. Assemble
Joystick Plate (D) to Clamp (A) using M6x12mm Screws (S-B) and a Phillips screwdriver.
Remove the weighted base following the manufacturer's instructions. Install the joystick to Joystick
Plate (D) using M4x10mm Screws (S-C) and a Phillips screwdriver.
STEP 3
Desktop
Secure Clamps (A) to the desktop in the desired locations.
C
A
S-B
S-D
S-E T-B
D
A
S-B
S-C
A

LAST UPDATED: 12/29/2022
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303