InFocus TD30 Manual

Remote Control button mapping
IR Protocol: NEC, Custom Code 07F8
Button HEX Data Code Function
Power 87 Toggle Power
Source 85 Input signal
Info 91 Bring up display
Up Arrow 9 Navigate up in the OSD
Down Arrow 80 Navigate Down in the OSD
Left Arrow 89 Navigate Left in the OSD
Right Arrow D0 Navigate Right in the OSD
Play/PiP DO Turn the PiP Mode On/Off
Audio Source 94 Change the Main Audio Input
Sleep 84 Sleep Timer
Reset 82 Recall default value
Aspect DC Change Scaling Mode
Mute C0 Mutes main audio
Swap D4 Swap the Main and PiP Windows
1 86 Direct Access for Main Input, #1
2 8E Direct Access for Main Input, #2
3 8A Direct Access for Main Input, #3
4 8C Direct Access for Main Input, #4
5 8F Direct Access for Main Input, #5
6 CC Direct Access for Main Input, #6
7 9C Direct Access for Main Input, #7
8 9F Direct Access for Main Input, #8
9 C4 Direct Access for Main Input, #9
Recall 95 Switch to Last Chosen Channel/Input
0 90 Direct Access for Main Input, #0
100 98 Direct Access for Main Input, #100
CH + 93 Increment Main Input Channel
CH - 97 Decrement Main Input Channel
Vol + 92 Increase Main Volume
Vol - 96 Decrease Main Volume
MTS 83 Change the Main Audio Enhancement
FAV.D CB
FAV.A 88
FAV 99