Inland 07340 User manual
07340 notebook mouse instructions:
The parts:
Turn the mouse upside-down and find the battery-release. Press the latch towards the
center of the mouse to release the battery cover.
Press the latch towards the center of the mouse to release the battery cover.
Insert the batteries in the mouse. The polarity (+) and (-) are molded into the plastic
battery compartment. Be sure that the batteries are in the mouse the correct way around.
Press the batteries into their place firmly. They should seat snugly as shown.
Reinstall the battery cover.
Insert the USB receiver into an available USB port.
Momentarily press the round button on the top.
Don’t hold this button down, just press it and release it.
You should see the light start to blink.
Turn the mouse upside-down and find the little round red button.
Press the little round red button on the bottom-side of the mouse.
You may have to use a pen or a straightened paper clip to press the button. Don’t hold
this button down, just press it and release it right away.
You should see the red light on the bottom of the mouse flicker off and back on again.
Your mouse is now ready to be used.
If you have any suggestions (comments or errors found) or if you need any more
