Razer RZ01-04630 Use and care manual

.
RAZER DEATHADDER V3 PRO
MASTER GUIDE

FOR GAMERS. BY GAMERS.™
1
With the Razer DeathAdder V3 Pro, victory takes on a new shape. Refined
and reforged with the aid of top esports pros, its iconic ergonomic form is
now more than 25% lighter than its predecessor, backed by a set of cutting-
edge upgrades to push the limits of competitive play. By combining Razer
HyperPolling with the ultra-low-latency connection of Razer HyperSpeed,
we’ve created the world’s fastest wireless technology that’s 8x faster than
standard 1000 Hz wireless mice.

FOR GAMERS. BY GAMERS.™
2
CONTENTS
1. WHAT'S INSIDE.......................................................................................................................................3
2. WHAT'S NEEDED ....................................................................................................................................4
3. LET'S GET YOU COVERED........................................................................................................................4
4. TECHNICAL SPECIFICATIONS ..................................................................................................................5
5. SETTING UP YOUR RAZER DEATHADDER V3 PRO ..................................................................................6
6. USING YOUR RAZER DEATHADDER V3 PRO...........................................................................................8
7. CONFIGURING YOUR RAZER DEATHADDER V3 PRO VIA RAZER SYNAPSE...........................................10
8. SAFETY AND MAINTENANCE................................................................................................................28
9. LEGALESE..............................................................................................................................................30

FOR GAMERS. BY GAMERS.™
3
1. WHAT'S INSIDE
▪Razer DeathAdder V3 Pro
A. Left mouse button
B. Status indicator
C. Right mouse button
D. Scroll wheel
E. Mouse button 5
F. Mouse button 4
G. USB Type C port
H. PTFE mouse feet
I. Power / DPI cycle button*
J. Razer™Focus Pro 30K Optical
Sensor
*The DPI stages are 400, 800, 1600 (default), 3200, and 6400, and can be customized using
Razer Synapse.
▪Razer HyperPolling Wireless Dongle
K. USB Type C port
L. Indicator LED

FOR GAMERS. BY GAMERS.™
4
▪USB Type A to USB Type C cable
▪Important Product Information Guide
2. WHAT'S NEEDED
PRODUCT REQUIREMENTS
▪USB Type A port
RAZER SYNAPSE REQUIREMENTS
▪Windows® 10 64-bit (or higher)
▪Internet connection for software installation
3. LET'S GET YOU COVERED
Register your product and score exclusive benefits
razerid.razer.com/warranty
Your product’s serial number
can be found here.

FOR GAMERS. BY GAMERS.™
5
4. TECHNICAL SPECIFICATIONS
▪Form factor: Right-handed Ergonomic
▪Connectivity:
oRazer HyperPolling Wireless
oWired
▪Battery life (constant motion):
oUp to 90 hours at 1000 Hz
oUp to 17 hours at 8000 Hz
▪RGB lighting: No
▪Sensor: Focus Pro 30K Optical Sensor
▪Max sensitivity (DPI): 30,000
▪Max speed (IPS): 750
▪Max acceleration (G): 70
▪Programmable controls: 8
▪Switch type: Optical Mouse Switches Gen-3
▪Switch lifecycle: 90-million Clicks
▪On-board memory profiles: 1
▪Mouse feet: 100% PTFE
▪Cable: USB Type A to USB Type C Speedflex cable
▪Tilt scroll wheel: No
▪Dock compatibility: No

FOR GAMERS. BY GAMERS.™
6
5. SETTING UP YOUR RAZER DEATHADDER V3 PRO
CHARGING YOUR MOUSE
Plug the charging cable from your PC's USB port into the Razer DeathAdder V3 Pro. For best results,
please fully charge the mouse before using it for the first time. A depleted battery will be fully
charged in approximately 4 hours.
Install Razer Synapse when prompted or download the installer from razer.com/synapse
CONNECTING YOUR MOUSE
A. Via wired mode
Connect the mouse to any of your PC's USB ports using the charging cable to use it in wired mode.
USB
Type A
USB
Type A
4H

FOR GAMERS. BY GAMERS.™
7
B. Via Razer™HyperSpeed Wireless (2.4GHz) mode
1. Connect the Razer HyperPolling Wireless dongle to your PC.
2. Press and hold the power / DPI cycle button for 3 seconds to power on the mouse.
*Indicator display can be customized to show connection status, mouse battery status
(default), or low-battery warning only using the Razer Synapse app.
The Razer DeathAdder V3 Pro is now ready for use in 2.4GHz wireless mode.
3s
USB
Type A
POWER ON
(Press and hold)
Red
Orange
Yellow
Green
MOUSE BATTERY STATUS*
*
0%
100%

FOR GAMERS. BY GAMERS.™
8
6. USING YOUR RAZER DEATHADDER V3 PRO
LOW BATTERY NOTIFICATION
The status indicator will blink red twice in repeated intervals to indicate that its battery's power is less
than 5%. This lighting sequence will repeat until the battery is drained or the mouse is connected to a
PC via the charging cable.
POWER ON / OFF
Press and hold the power / DPI button for 3 seconds to power on or off the mouse.
3s

FOR GAMERS. BY GAMERS.™
9
PERSONALIZING YOUR MOUSE WITH RAZER SYNAPSE
Change the mouse's DPI to match your playstyle with a press of the Power / DPI cycle button or fine-
tune your own sensitivity setting using the Razer Synapse app. The status indicator will briefly change
its color to show which DPI stage is currently active.
DPI
Designated
color
400
Red
800
Green
1600
(Default)
Blue
3200
Cyan
6400
Yellow
Status
indicator
Power / DPI
cycle button