CONTENTS
1 Introduction 4
2 Technical Specification 6
3 General Description 7
4 Installation 9
4.1 Hopper Installation 9
4.2 Lock Installation 10
5 Machine Interfaces 11
5.1 Status LEDs 11
5.2 Hardware 12
5.2.1 Connection Diagram 13
5.2.2 Interface Connector 13
5.3 Communication Protocols 14
5.3.1 Encrypted SSP (eSSP) 14
6 Programming the SMART Hopper 15
6.1 Clearing a Jam 18
Appendix A –Ordering Information 19
Appendix B –Dimension Drawing 20
Appendix C –eSSP Commands 21
Appendix D –Example eSSP Communications 22
Appendix E –Parts List 24
Revision History 25
TABLES
Table 1 - Environmental Requirements 6
Table 2 - Power Requirements 6
Table 3 - Interface Logic Levels 6
Table 4 - Maximum and Minimum Coin Dimensions 6
Table 5 - Approximate Hopper Capacities 6
Table 6 - SMART Hopper Weights 6
Table 7 - LED Status Codes 11
Table 8 –eSSP Host Connector Pin Details 13
Table 9 - CCT Coin Acceptor Connections 13
Table 10 - SMART Hopper eSSP Commands 21
Table 11 - eSSP example for the SMART hopper with coin mech connected via the hopper 22
Table 12 –eSSP example for the SMART hopper with coin mech connected separately 23
FIGURES
Figure 1 - SMART Hopper Connection Diagram 13
Figure 2 - Interface Connections location 13
Figure 3 - Connecting the SMART hopper to a PC 15
