Innovative Technology ITKC-500 User manual

1
FCC WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance will void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio or television reception. If this equipment
does cause harmful interference, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Move the transmitter to a different physical location.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- If you cannot eliminate the interference, the FCC requires that you stop using
your headphones.

2
1.Product Introduction
DPFMate is specifically designed PC software for small screened digital photo
frames. Download pictures from your PC into a variety of digital photo frames.
Features:
Language (English)
Picture preview
Zoom In/Out, Crop, Rotate
Single, Sequence, Delete
Read and save pictures
Function Keys/Buttons
1. MENU/ENTER: Press and hold to turn on/off the device; Press to enter MENU
mode; press to confirm selection.
2. UP: go to next
3. DOWN: go to front
4. USB: to connect the device to PC by USB cable.

3
5

OFF/ON: to turn off/on the device power. If OFF, to press MENU can not turn
on the device.
Functional Specification
LCD 1.5” CSTN
Resolution 128x128 dots, 65K colors
Internal Memory 8MB Flash
Memory Capacity >50pcs photos
Display Modes Single/Slide mode
Operation Modes Calendar and Clock display
File formats JPG, BMP, GIF
Power supply Rechargeable Li-ION batteries, 150mAh,
USB Charge
Charging hour <3 hours
Charging current 75-85mA
Life time 4 hours
Connectivity USB 1.0
OS Windows 2000/XP/Vista
Product features Support auto-run, (No CD required)
2. Interface Guide
Picture 1

4
3. Transfering pictures to the digital keychain photo frame.
3.1 Connecting Terminal
Connect the keychain photo frame to the computer using the included USB cord.
Once connected, the DPFMate will automatically start up. If connected correctly,
the DPFMate will automatically load all the pictures that are saved in the keychain
photo frame. They will be displayed in the “Pictures in DPF” section. If there are
no pictures saved in the keychain photo frame, the DPFMate will show a dialog
box that says there are no pictures in the DPF.
Picture 2
‘Picture 1’ shows the "Crop Frame", the specific range of the selected picture that
will be imported into the DPF Pictures Zone. Use the cursor to move the “Crop
Frame” to select the area of that you would to have displayed. You can also zoom
or rotate images with the “Preview Images Zone” with the buttons to the right of
the picture displayed. Once you have the area you wish to be displayed selected,
click the "Add" button on the right to add into the “DPF Image Zone”, these
pictures can be loaded in to the keychain photo frame.
Once finished with the picture selections, click on the "Download" button to have
the “DPF Image Zone” and DPF synchronize, this downloads the pictures from the
right side in to the keychain photo frame.

5
Specific steps as shown in ‘Picture 3’:
Picture 3
CAUTION: While donwloading pictures, if the USB cable is disconnected all
pictures selected will be lost. Please be sure not to disconnect the keychain
photo frame from the computer while downloading pictures.
4. Other Functions
4.1 ZOOM Preview Image
1. Click on the + button to the right of the displayed picture to zoom in.
2. Click on the – button to the right of the displayed picture to zoom out.
4.2 ROTATE Preview Image
Press the “Rotate L” button to the right of the displayed picture to rotate the
picture counterclockwise 90 degrees.
Press the “Rotate R” button to the right of the displayed picture to rotate the
picture clockwise 90 degrees

6
4.3 Crop Preview Picture or Auto Resize Picture
There are pictures that DPF Mate can be used with the “Crop Frame” to crop. The
“Clear” button erases the selected rectangle on the displayed picture, as shown
Picture 4 below.
Picture 4
Click on “Clear” button, to change the displayed picture size. This will
automatically change the picture to be as big as the keychain photo frame’s LCD
size. After using the “Clear” function, the “Clear” button to the right of the
displayed picture will turn to “Rect”, for the “Crop Frame” function. As shown in
Picture 5.
Picture 5
Click on the “Rect” button to get the “Crop Frame” back on the displayed

7
picture (See Picture 4).
Users can click on “Add” button so that the cropped or resized picture that is
displayed will be added into “DPF Pictures Zone” on the right hand side of the
screen can be saved in to the keychain digital photo frame.
4.4 Deleting Pictures from the DPF Picture Zone (edited or cropped pictures)
Select one picture or several pictures then click on the “Delete” button to delete.
Click the “All” button to select all pictures to delete from the “DPF Picture Zone”.
Note:
After deleting pictures and exiting the DPFMate, click on the
“Download” button to update the DPFMate data into the keychain
digital photo frame.
“Save” button: Saves the selected picture from the “DPF Picture Zone” into the
PC.
“Save All” button: Saves all pictures from the “DPF Picture Zone” into the PC.
Right click on a blank area of the DPFMate menu, a pop up menu will show the
DPFMate menu language to change, as shown Picture 6, choose from English or
Chinese.
Picture 6

8
4.5 Changing the Menu Color
The DFFMate “Setting” dialog box let’s you set the DPF front color and
background color, as shown in Picture 7. After changing the settings, you can see
the results in the DPF menu interface.
Picture 7
Keychain Digital Photo Frame Function Introduction
There are three buttons on the side of the keychain digital photo frame. UP,
DOWN and MENU. UP is the first button, DOWN is the second button and
MENU is the last button which is also the power button.
I. Press the UP key to preview the previous picture.
Press the DOWN key to preview next picture.
Press the MENU key to enter the main menu, or to turn on and off.
Press the MENU key to enter the menu with the main functions as shown below.

9
The “USB Connect” function charges and downloads pictures from the PC.
II. Setting the display time and selecting the “Slide Show” function.
Press the MENU key to get into the submenu.
Main Menu
USB Connect
Slide Show
AUTO Off
LCD Contrast
Backlight
Display Clock
Set Clock
Delete One
Delete All
Exit
Main Menu
USB Connect
Slide Show
AUTO Off
LCD Contrast
Backlight
Display Clock
Set Clock
Delete One
Delete All
Exit