
No. Name No. Name
[1]
output [1]
interface
female
Power
indicator
male
equipped with serial communication port
status
indicator
5
port
through PC
11
interface
port
can be connected to devices such as a mouse
and printer
Used to restore to default settings
3.2 Wiring
■Power supply
electromagnetic interference.
through the enclosures of other electrical devices or grounding terminals. This is to prevent the grounding
conductor from bearing the current of other branch circuits.
■Communication ports
devices.
■Connection between DB9 female and external devices
Pin No.
1
12345
6789
COM1 [RS485/24W]
COM3 [RS485]
DB9 female
5
■Communication cable for DB9 female
female.
⑧
① ②
③ ④ ⑤
⑥⑦(
Cable connector and pins
Pin assignment
Pin No. Pin No.
1
7
1
5 GND GND
Applicable models and
ports
HMI user program setting
for use of the cable
■Connection between DB9 male and external devices
communication port. The pin assignment is as follows.
Pin No.
1
5
■Communication cable for DB9 male
I
.
(
⑧
① ②
③ ④ ⑤
⑥⑦
(
Cable connector and pins
Pin assignment
Pin No. Pin No.
1
RXD 7
TXD 1
5 GND GND
Applicable models and
ports
communication port
communication port
HMI user program setting
for use of the cable
■Precautions for communication connection
Use shielded communication cables in case of long communication cables or where communication cables
■USB interface
■Ethernet connection
shielded cables for Ethernet.
■DI/DO (reserved for customized needs)
Terminals No. Name Description No. Name Description
1 Ground
X1 11 X7
5 Y1
7 X5 15
Common input terminal COM Common output terminal
Item Item
Input channels Output channels
Input connection mode Output connection mode
Input mode Output mode
Input voltage class Transistor output
ON voltage
Input impedance Isolation method Optocoupler isolation
Isolation method Optocoupler isolation Common output terminal
terminal COM
Common input
terminal
Eight DIs sharing a common
Programming Reference
Tools needed before programming the HMI: a PC installed with InoTouchPAD and a programming cable
■Software aquisition
.
■Recommended PC congurations
■Programming cable (connecting to Inovance PLC)
Touch Calibration
.
■Entering touch calibration program
■Calibrating:
Tap the center of "+" with your finger or a stylus.
When "+" is moving, repeat this action.
Press ESC to cancel the operation.
①
②
③
⑤
④
Touch calibration
MD500系列
通用变频器综合手册
MD500
系列通用变频器综合手册
由于本公司持续的产品升级造成的内容变更,恕不另行通知
A00
资料编码 19010306
版权所有 深圳市汇川技术股份有限公司
Copyright Shenzhen Inovance Technology Co., Ltd.
服务与技术支持APP官方微信
深圳市汇川技术股份有限公司
Shenzhen Inovance Technology Co., Ltd.
地址:深圳市宝安区宝城70区留仙二路鸿威工业区E栋
总机:(0755)2979 9595
传真:(0755)2961 9897
客服:400-777-1260
http://www.inovance.com
苏州汇川技术有限公司
Suzhou Inovance Technology Co., Ltd.
地址:苏州市吴中区越溪友翔路16号
总机:(0512)6637 6666
传真:(0512)6285 6720
客服:400-777-1260
http://www.inovance.com
Min
Max
综合手册
二维码
销售服务联络地址
条形码位置
放置二维码后删除虚框
5 64
failure or damage under normal use conditions.
d. Operations not following the user instructions
Suzhou Inovance Technology Co., Ltd.
Website: