InRoom Furniture BK6009 User manual

NOTE TO CUSTOMERS:
For ease and speed of assembly we recommend that before you commence each step of the
assembly that you identify all the parts required to complete that step.
We recommend that where possible you allow sufficient space to assemble the item as close
as possible to the place where it will be once assembled.
For the protection of your furniture we recommend that the product is placed on a dry, soft,
smooth and clean surfaces during assembly to prevent any damage. Avoid damp and direct
sunlight.
During assembly do not over tighten the screws or bolts, as this may damage the product.
Please ensure you retain all the product packaging until the item is completely assembled.
Periodically check all fitting and re-tighten as necessary.
Never allow any liquids to remain on your furniture as absorption can cause the wood to warp
or finish to de-laminate.
It is recommended that this item should be assembled by two adults.
MODEL : #BK6009 BOOKCASE
PAGE 1 OF 3

Side Panel Left
Lower Shelf Panel
Quantity: 1
Side Panel Right Top Panel Base Panel Middle Shelve Panel
TOOLS REQUIRED
MALLET
1 1
ITEM: #BK6009 - BOOKCASE
12
Lower Divider Panel Upper Back Panels
9 pcs
Sticker
PAGE 2 OF 3
STEP 1 STEP 2 STEP 2a
STEP 3 STEP 4
1
Lower Back panel
31
Drawer Front panel
2
123 4 5
6 7 89 10
Drawer Side- Left
Quantity: 2
11
Drawer Side- Right
Quantity: 2
12
Drawer Back
Quantity: 2
13
Drawer Base
Quantity: 2
14
A
32 pcs
26 pcs
Wooden Dowel M6 x 25
Ø15/64”
D
Connecting Bolts B
4 pcs
Camlocks D12 x 9.5mm
5 pcs
Camlocks D15 x 12.5mm
C
E
FG
24 pcs
H
Slide’s Screw M4 x 12
16 pcs
Pan head Screw M3.5 x 12
for the Legs
15/32”
Ø 5/32” Ø 9/64”
IJ
4 pcs
2 pcs
K
Drawer Pull
12 pcs
L
25/32”
Ø 5/32”
1
6
6
6
3
7
7
2x2
x2
5
Align the Camlock ‘C’
& turn it to locked
position when it is
connected to the bolts.
E
A
C
Leg
4 pcs
2 sets
Drawer Slide
15/32”
Pan head Screw M4 x 20
11
x2
12
7
G2nd
hole 7
F
F
G
RIGHT SURFACE
1st
hole
LEFT SURFACE
Align screws ‘G’ through
the right holes in ‘F’ as
the arrows shown,right into
the pin holes in the panels.
Align screws ‘G’ through
the right holes in ‘F’ as
the arrows shown,right into
the pin holes in the panels.
2
1

ITEM: #BK6009 - BOOKCASE
Assemble TWO sets of drawers
leg’s cap
1
D
D
D
D
K J
Align the Camlock ‘C’
& turn it to locked
position when it is
connected to the bolts.
Align the Camlock ‘B’ & turn it to locked
position when it is connected to the bolts.
PAGE 3 OF 3
STEP 6
4
4
H
I
A B C
L
GF
5
5
5
5
5
5
STEP 7
STEP 8 STEP 9
STEP 10STEP 11
STEP 12
2
2
1
1
3
2
STEP 5
6
6
6
7
7
1
10
2
13
10
10
10
10
14
12
12
12
11
11
11
8
8
8
9
slide-in the
drawer base panel