Dorel Asia DA7696 User manual

DA7696
UPC CODES:
(TAKEN FROM CARTON)
AND KEEP FOR FUTURE
DOREL ASIA
3 PC METAL PUB SET WITH
WOOD TOP
Model No:
0-65857-17504-2
NOTE:
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ
_______ / _______ / _______
REFERENCE.
Lot number:
Date of purchase:
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer
service department. We will replace the part FREE of
charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

Check bolts/screws periodically and tighten them if necessary.
Dust table regularly with a soft, dry cloth to prevent soil build up. A dampened cloth may be used occasionally to clean the surface. Dry
immediately and buff lightly, following the grain. Avoid using harsh cleaners and abrasive products.
Use coasters to prevent the formation of moisture rings and trivets to protect from hot items. Cover extension leaves (if applicable)
with a soft protective fabric before storing. Do not slide objects across the surface - always lift them.
MAINTENANCE
LIMITED WARRANTY
Dorel warrants its product to be free from defects in material and workmanship and agrees to remedy any such
defect. This warranty covers 1 year from the date of original purchase. This warranty is valid only upon
presentation of proof of purchase. This is solely limited to the repair or replacement of defective furniture
components and no assembly labor is included. This warranty does not apply to any product which has been
improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any way. This
warranty gives you specific legal rights and you may also have other rights which vary from State to State
WARNING: Should this product become damaged,
and/or components are broken or missing, DO NOT USE.
12345 Albert-Hudon Boulevard, Suite 100
* DO NOT use power tools.
* Phillips head screw driver is not included.
CARE AND CLEANING
Montreal, Quebec
Canada, H1G 3L1
E-MAIL: [email protected]
NOTES
* Ensure all parts and components are present before beginning assembly.
* Assemble on a soft, smooth surface to prevent damage to product finish.
* CAUTION: Adult assembly required
* Assembly and handling may require two people.
* Estimated assembly time is 45 - 60 minutes.
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product model number, color
and a detailed description of the part.
Customer Service Department No. 413

18 PCS
1 PC
φ1/8"*1/2"
M4
SCREW
ALLEN KEY
35 PCS
18 PCS
3
4
φ1/4"*1-1/4"
φ1/4"*1/2"
BOLT
BOLT
3 PC METAL PUB SET WITH WOOD TOP
DA7696
HARDWARE LIST
1
2

3 PC METAL PUB SET WITH WOOD TOP
DA7696
PARTS LIST
A
B
C
TABLE TOP
LEFT SIDE PANEL
MIDDLE PANEL
1 PC
1 PC
1 PC
D
E
F
STRETCHER
RAIL
RIGHT SIDE PANEL
1 PC
1 PC
6 PCS
G
H
I
SEAT BOARD
STOOL PANEL
3 PCS
2 PCS
4 PCS
SHELF
4 PCS
J
K
BOTTOM STRETCHER
4 PCS
TOP STRETCHER

STEP 1
3 PC METAL PUB SET WITH WOOD TOP
DA7696
Attach the left side panel (B), middle panel (C), and right side panel (D) to table top
(A) with bolts (1). Use Allen Key (4) to install the bolts.
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in the
following steps.

STEP 2
3 PC METAL PUB SET WITH WOOD TOP
DA7696
Attach stretcher (E) to middle and right side panel (C & D) with bolts (1) & (2). Use Allen
Key (4) to install the bolts.
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in the following
steps.

STEP 3
3 PC METAL PUB SET WITH WOOD TOP
DA7696
Attach rails (F) to left side panel (B) and middle panel (C) with bolts (1). Use Allen Key (4)
to install the bolts.
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in the following
steps.

STEP 4
Tighten all bolts previously installed in steps 1~4.
With the help of another person, turn the table upright.
3 PC METAL PUB SET WITH WOOD TOP
DA7696
Attach shelves (G) to left side panel (B), middle panel (C), and rails (F) as shown below using screws
(3) and a Phillips head screwdriver (not included).
NOTE: Phillips round head screws (3) will make their own holes. Do not use power tools and do not
over tighten the screws.

STEP 5
3 PC METAL PUB SET WITH WOOD TOP
DA7696
Attach bottom and top stretchers (K & J) to stool panels (I) with bolts (2).
Use Allen Key (4) to install the bolts.
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in the following steps.

STEP 6
Repeat steps 5-6 to assemble the other stool.
3 PC METAL PUB SET WITH WOOD TOP
DA7696
Attach seat board (H) to stool panels (I) with bolts (1) and Allen key (4).
Tighten all bolts previously installed in steps 5~6.