Insignia NS-SB212 User manual

799 mm
88 mm
Hold this template to the wall and use a level to
level it, then temporarily tape it to the wall.
Drill two holes at the indicated points.
Wall
Wall
Anchor
Wall
Wall
Soundbar
6 to 8 mm
(1/4 inches)
Remove the template from the wall.
You must use suitable wall anchors (not supplied) if
you are mounting on drywall, concrete, or other wall
types.
Fasten two screws (not supplied) to the wall.The
screw heads should protrude from the wall
approximately 1/4 in. (6-8 mm).
The screw width must be about 3/16" and the
screw head about 1/4" to 3/8".
Align the speaker hanging brackets with the screws,
then hang the soundbar on the screws.
406.4 mm
12-0293
Drill a hole here
LEVELING EDGE
Hold a level to the Leveling Edge of this template
LEVELING EDGE
Drill a hole here
Wall mount template
Locate / Position holes onto studs behind drywall or use anchors for mounting
Warning: Improper installation can result in serious injury or damage to your soundbar.
If necessary, seek the assistance of a professional.