Intelbras XAC 8000 User manual

User guide
XAC 8000
Remote control
Congratulations, you have just purcha-
sed a product with Intelbras quality
and security.
The XAC 8000 remote control is a
dedicated accessory for user interface
and alarm center. It allows to activate,
deactivate and perform other functions
together with the center unit with
three keys and light identication of
events. Up to 98 XAC 8000 controls
can be added to each AMT 8000 alarm
center.
1.Care and security
» Follow all instructions in the ma-
nual/guide for product installation
and handling.
» Do not expose the control to envi-
ronments with agents such as rain,
fog, water splashes, solid particles,
among other harmful agents.
» Wireless communication technology,
when exposed to environments with
high power radiation, may suffer in-
terference and have its performance
impaired. Example: locations near
TV towers, AM/FM radio stations,
amateur radio stations, etc.
» Clean only the external part of the
device, using only a damp cloth (do
not use chemical solvents);
» Do not subject the device to exces-
sive pressure or knocks/falls.
» Do not cover the device with adhe-
sives, paper or inks.
» Do not expose directly to sunlight.
» Only perform congurations and
installations by qualied personnel.
» Perform periodic tests on it to va-
lidate weather conditions, battery
level and other factors so that the
site supervised by the system is
always able to operate properly.
2.Technical
specications
Triggering 3 independent
keys
Frequency of
operation
RF signal from
915 to 928
MHz
Power 11 dBm
Modulation DSSS BPSK 40
kbps
Transmission range
up to 200 m
with direct line
of sight open
eld
Power supply 3 V (1 battery
type CR2032)
Operating
temperature
–10 to 50 °C
@ 90% of
humidity
Compatibility Alarm center
AMT 8000
Anti-jamming Against invasive
signals
ANATEL
Homologation Yes
Color Black
Dimensions
(W × H × D)
42 × 68 × 11
mm
Weight 20 grams
Note: Intelbras wireless systems
are tested to the highest standards
and bring high reliability, but due
to their use/installation in various
scenarios, some considerations
must be taken into account:
» Transmitters/receivers may
be disturbed by radio signals,
natural interference, location of
operation of the devices, climatic
issues and other adversities
affecting the transmission of
data regardless of the frequency
or technology used, since the
means of transmission is adverse
and different from place to place.
» The receivers/transmitters of
the devices have an internal
processing time, and only
receive the data necessary for
communication between them
after this particular time for the
system.
» Wireless devices must be tested
regularly to determine if sources
of interference exist and to
protect against possible failures.
3. Features
» Differentiated design.
» Protection against malicious sig-
nals.
» Encryption in data transmission
between devices.
» LED trigger status indicator.
» Long battery life.
» Anti-key lock.
4. Register
To register the control with the alarm
center, press the synchronization key
on the center unit and then press any
of the control keys to connect both
and the LED should ash green, indi-
cating the success of the registration.
If the LED ashes orange, the signal
is intermittent or weak and if the LED
ashes red, there was some fault and
the process must be repeated. The
control addressing will be according
to the sequence performed, respec-
ting the maximum limit of 98 devices
of this type.
XAC 8000 remote control
To physically delete a control registe-
red in the alarm center, hold down the
keys of positions 1 and 2 (following
vertical orientation) of the control for
10 seconds until the LED ashes twice
in red. When physically deleting the
controls, they must also be deleted
from the memory of the center unit via
programming.
To register other controls/accessories
through keyboard commands and
more information/congurations, refer
to the complete manual of the AMT
8000 center unit.
Note: when registering the XAT
8000 remote control to the alarm
center using the synchronization key,
perform the practice safely, because
the alarm center is energized, so as
not to bring risks to the installer and
the equipment.

7. Homologation
05326-18-00160
This equipment is not entitled to
protection against harmful interfe-
rence and may not cause interfe-
rence to duly authorized systems.
5. Handling
Each registered control will be as-
sociated to the user, according to
the registration sequence, and the
rst registered control (address
00) will have the same permis-
sions as the user of password
00 (Master User), and the other
controls assuming the addresses
01 to 97 (necessary to register/
enable passwords and permis-
sions for these users). The system
activation and deactivation keys
of the controls come enabled
from the factory for the user de-
ned (permission required), and to
change these and enable the third
key, refer to the complete manual
of the AMT 8000 alarm center.
6. Battery
Use only quality batteries with the
correct sizing for the device, and
with the typical use of the device,
the battery life forecast is 3 to 5
years and can be inuenced by the
number of triggering, weather con-
ditions and conguration mode.
The battery model should be
CR2032, being used one (1) battery
per control.
3 VOLTS
C
R
2
0
3
2
Battery model CR2032
The indication of the low battery level
of controls will be demonstrated on
the keyboard displays and/or in appli-
cations with respective events.
To change the batteries of the XAC
8000 control, it must be opened, star-
ting at the back of the control (near
the opening for keyring allocation).
Remove the used battery and add the
new one, checking the correct position
and close the control cabinet again.
Note: programming and registra-
tion between control and center unit
will not be lost when the batteries
are removed or the center unit in
which it is paired is turned off.
Warranty term
It is expressly stated that this contractual
warranty is given subject to the following
conditions:
Name of customer:
Signature of the customer:
No. of the invoice:
Date of purchase:
Model: Serial No:
Reseller:
1. All parts and components of the product
are under warranty against possible ma-
nufacturing defects, which may present,
for a period of one (1) year, – comprising
90 (ninety) days of legal warranty and 9
(nine) months of contractual warranty, –,
counted from the date of purchase of the
product by the Consumer, as stated in the
invoice of purchase of the product, which
is part of this Term throughout the natio-
nal territory. This contractual warranty in-
cludes the express exchange of products
that are defective in manufacture. In case
no manufacturing defect is found, but
aw(s) from inappropriate use, the Con-
sumer will bear these expenses.
2. Product installation must be done in ac-
cordance with the Product Manual and/
or Installation Guide. If your product
needs to be installed and congured by
a qualied technician, look for a suita-
ble and specialized professional, and the
costs of these services are not included
in the value of the product.
3. If the defect is found, the Consumer
should immediately communicate with
the nearest Authorized Service listed by
the manufacturer, – only they are autho-
rized to examine and remedy the defect
during the warranty period provided he-
rein. If this is not respected, this guaran-
tee will lose its validity, as the violation
of the product will be characterized.
4. In the event that the Customer request
home care, he/she should refer to the
nearest Authorized Service for the tech-
nical visit fee. If the need for withdrawal
of the product is found, the expenses
arising, such as transportation and sa-
fety to and from the product, are under
the responsibility of the Consumer.
5. The warranty will totally lose its validity
in the event of any of the following: a)
if the defect is not of manufacture, but
caused by the Consumer or by third par-
ties alien to the manufacturer; b) if the
damage to the product comes from ac-
cidents, claims, agents of nature (light-
ning, oods, landslides, etc.. ), humidity,
mains voltage (overvoltage caused by
accidents or excessive mains uctua-
tions), installation/use in disagreement
with the user manual or due to natural
wear of parts and components; c) if the
product has been inuenced by chemi-
cal, electromagnetic, electrical or animal
(insects, etc.); d) if the product’s serial
number has been tampered with or era-
sed; e) if the device has been violated.
6. This warranty does not cover loss of
data, so it is recommended that the
Consumer make a regular backup of the
data on the product.
7. Intelbras is not responsible for the ins-
tallation of this product and also for any
attempts of fraud and/or sabotage on its
products. Keep software and application
updates, if any, up to date, as well as ne-
twork protections necessary to protect
against hackers. The equipment is gua-
ranteed against aws within its normal
conditions of use, and it is important to
be aware that, since it is an electronic
equipment, it is not free from frauds and
scams that may interfere with its correct
functioning.
Since these are the conditions of this com-
plementary Warranty Term, Intelbras S/A
reserves the right to change the general,
technical and aesthetic characteristics of its
products without prior notice.
The manufacturing process for this product
is not covered by the requirements of ISO
14001.
All images in this manual are illustrative.
01.20
Made in Brazil
Customer Support: (48) 2106 0006
Forum: forum.intelbras.com.br
Support via chat: intelbras.com.br/
suporte-tecnico
Support via e-mail: suporte@
intelbras.com.br
Customer Service: 0800 7042767
Where to buy? Who installs it?
0800 7245115
Produced by: Intelbras S/A – Indústria de Telecomuni-
cação Eletrônica Brasileira – Rodovia BR 459, km 124,
nº 1325 Distrito Industrial Santa Rita do Sapucaí/MG
– 37540-000 – CNPJ 82.901.000/0016-03
www.intelbras.com.br