SKYDANCE RT1 User manual

RT1 RT6
Warranty
5 years
Warranty
Operation temperature
Case temperature (Max.)
Environment
IP20
IP rating
Ta: -30
O
C ~ +55
O
C
T c: +85
O
C
Model No.: RT1/RT6/RT8
Touch Wheel RF Remote Controller
Safety and EMC
EMC standard (EMC) EN301 489,EN 62479
Radio Equipment(RED) EN300 328
Certification CE,EMC,LVD,RED
EN60950
Safety standard(LVD)
LVDRED
1 Zone Dimming 4 Zone Dimming 8 Zone Dimming
RT8
● Apply to single color LED controller.
Ultra sensitive color adjustment touch wheel.●
● Each remote can match one or more receiver.
● AAAx2 b attery powered.
● Operate with LED indicator light.
● Magnet on the back which can be easily stuck on back holder or any metal surfaces.
Technical Parameters
Input and Output
Features
1,4 ,8 zone dimming/Touch color wheel/Wireless remote 30m distance/AAAx2 battery/Magnet stuck fix
Output signal RF 2.4GHz( )
Working voltage 3VDC AAAx2( )
Working current ＜5mA
Standby current ＜10μA
Standby time 1 year
Remote distance 30m
User Manual Ver 1.0.2 www.iskydance.com Page 1

Mechanical Structures and Installations
Operation
● When turn on light, the indicator display blue. when turn off light, the indicator display red.
● When touch the color wheel, the indicator will display the same color.
● When press or touch operation is invalid (If the light is off), the indicator display red.
● To extend battery life, no touch or press key operation after a few seconds,
the touch wheel will enter sleep state, you need press any key to make touch wheel quit sleep state.
Match Remote Control (two match ways)
Use the controller’s Match key
Match:
Short press match key, immediately press on/off
key (single zone remote) or zone key (multiple zone
remote) of the remote.
Use Power Restart
Match:
Switch off the power, then switch on power again,
immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
.
Delete:
Switch off the power, then switch on power again,
immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were
deleted.
Delete:
Press and hold match key for 5s to delete all match,
The light blinks 5 times means all matched remotes
were deleted.
End user can choose the suitable match/delete ways. Two options are offered for selection:
53.00 mm
122.00 mm
17.50 mm
53.50 mm
3VDC(AAAx2) Battery Back holder with magnet
To x the remote, three options are offered for selection:
Option 1: stuck the remote on any metal surfaces directly.
Option 2: fix the remote' back holder on the wall with two screws.
Option 3: adhere the remote' back holder to the wall with paster.
RT1,RT6,RT8 Touch Wheel RF Remote Controller
User Manual Ver 1.0.2 www.iskydance.com Page 2

: Short press recall the scene,
long press 2s save current brightness into S1/2/3/4.
: 25%, 50%, 75%,100% brightness.
: Adjust brightness, short press 10 levels,
long press 1-6s for continuous 256 levels adjustment.
: Touch to change brightness.
: Turn on/off light.
: Small night brightness (10%).
: Turn off light after 30s, long press 2s will turn off light after 60s.
: Short press turn on/off all zone light.
: Short press select and turn on zone light,
long press 2s turn off zone light.
Short press multiple zone key fastly,
will select multiple zone synchronously.
: Touch to change current zone brightness.
: Short press recall the scene,
long press 2s save current state into S1/2/3/4.
4 zone recall or save synchronously.
: 25%, 50%, 75%,100% brightness for current selected zone.
● RT1 1 zone dimming remote
S1S2S3S4
30s
S1S2S3S4
30s
● RT6 4 zone dimming remote
S1S2S3S4
124
3
S1S2S3S4
124
3
Note: The remote RT6 can be used as 4 zone dimming remote or single zone 4 channel dimming remote.
Operation: Long press " " + " " at the same time for 2 seconds as 4 channel dimming remote,
only match with one or multiple receiver of 4 channel, such as V4,VP or V4-L controller.
Operation: Long Press " " + " " key at the same time as 4 zone dimming remote,
each zone match with one or multiple receivers.
When set ok, the green indicator will light on longer.
1
4
Key function
RT1,RT6,RT8 Touch Wheel RF Remote Controller
User Manual Ver 1.0.2 www.iskydance.com Page 3

Safety information
1. Read all instructions carefully before you begin this installation.
2. When installing battery, pay attention to the battery positive and negative polarity.
A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery.
3. If no response from the receiver, please re-match the remote.
4. Gently handle remote, beware of falling.
5. For indoor and dry location use only.
: Short press turn on/off all zone light.
: Short press select and turn on zone light,
long press 2s turn off zone light.
Short press multiple zone key fastly,
will select multiple zone synchronously.
: Touch to change current zone brightness.
: Short press recall the scene,
long press 2s save current state into S1/2/3/4.
8 zone recall or save synchronously.
● RT8 8 zone dimming remote
S1S2S3S4
124
3
S1S2S3S4
124
3
568
7
568
7
RT1,RT6,RT8 Touch Wheel RF Remote Controller
User Manual Ver 1.0.2 www.iskydance.com Page 4