Intempo Digital iDS-04 Series User manual

intempo
DIGITALI
« «
« «
A4* 4 « 44 4***
i
>4
1
%
:vv>>‘V?\ 4
1
*
7
ntempo
GUARAHTH
:USER GUIDE
/WPSpeaker in

Contents
P3
Safety Instructions
...PA
Caution
P4
System Profile
P5-P7
Easy Setup Guide
P7
Specifications
P8
Troubleshooting
-2-

Safety Instructions
Please Read the Following Operation Precautions Before Use
■Read instructions ●All safety and operating instructions should be
read thoroughly before attempting to operate this audio system.
■R e t a i n i n s t r u c t i o n s f o r f u t u r e r e f e r e n c e ,
●Heed warnings ●All warnings on this audio system and in the
operating Instructions should be adhered to.
●Follow instructions ●AH operating and user instructions should
be followed.
●TO PREVENTTHE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE THE COVER (OR BACK). THERE ARE NO USER
SERVICEABLE PARTS INSIDE THIS UNIT.
●Do not expose the speakers to liquid or solvent,
●Never remove grille covers In order to service the speaker
system. The speaker system does not contain any user serviceable
parts.
●Do not expose the speaker system to temperature or humidity
extremes, direct sunlight, excessive dust, or vibrations.
●Place the speaker system on astable, level surface. Do not drop,
apply excessive force to the controls, or put heavy objects on top
of the speaker.
■If cleaning is required, use asoft dry cioth. If necessary, use adamp
cloth without any solvents.
●in order to protect the speaker system, avoid microphone feedback,
continuous output from electronic musical instruments, or distorted
output from any signal source
●Do not place the speakers close to fluorescent light sources or neon
light fixtures.
●Although the speakers are magnetically shielded, keep magnetic
storage media [disks and tapes) at least four inches from the speaker
system in order to ovoid data loss.
■V/ARNING: To reduce the risk of fire or electric shock, do not expose
this speaker system to rain or moisture.
-3-

Caution
CAUTION Caution; To prevent the risk of electric shock, do not
remove cover {or Pack). No userserviceoble ports
inside. Refer servicing to quolllled service personnel.
R I S K O P E L E C T R I C S H O C K
DO NOT OPEN
The lightning tiosn with arrowhead, within on
equlloterol triongle, Is Intended to alert the user to the
presence of uninsuloted ‘dangerous voltage ‘within the
product's enclosure thot moy be of sutticlent magnitude
to constitute orisk of electric shock to persons.
▲
A
The exclomotion point within on equilateral triangle is
Intended to alert the user to the presence of important
operotlng ond molntenonce (servicing) instructions in
the llteroture accompanying the oppllonce.
Syst em Profi le
1EA
1.IDS-04 Speaker
2,Battery pack stand
3 . E VA i P o d b a c k i n s e r t
4.Power adapter
5. 1/8'stereo cable
6 . U s e r ’ s m a n u a l
1EA
2EA
1EA
]EA
1EA
m
a
jj
12
Lcitn.
5
3 4
-4-

Easy Setup Guide
B
o o
V
OOO
^^*1*
r
A
t
Step 1-1: AC POWER
Plug power adapter into speaker.
Connect to wall outlet.
Astep 1-2 :DC (BATTERY) POWER
A: Ins ta ll s i x "A A" b a t t er ie s
(battery not Included)
Into the battery pack.
B:Connect the power plug
from bat t ery pack to s peaker.
(BATTERY )
B
1\ 0
0
0
0
©© ©
♦
-5-

Easy Setup Guide
Step
Press
into
OOO
I
oo
i
:n
Bl7\
QI
n
Step 2-2 :
Any device with a1/9" headphone jack can be connected
to the speakers. Plug one end of the provided cable Into the
devices headphone jack and the other end into INPUT on the
back of the speakers.
-6-

Easy Setup Guide
Step:3
Turn on power switch. Blue LED will light when speaker system is on.
decrease volume increase volume
●Using the iPod shuffle or an MP3 player.
You will need to adjust its volume first.
Specifications
Transducers: 2-inch full range per channel.
Power consumption ;8W maximum.
Frequency range :180Hz~20kHz
Amplifier output power: 3W per channel.
Dimensions Speaker :230 x80 x88mm (V/ xHxD)
Battery pack: 113x33x 89mm (Wx HxD)
●7*

Troubleshooting
Symptom Possible problem Solution
No powei, Olue LEO
on tnevoiurne
con ti o l Is n ot li t,
(AC OOODtoi
operatloni
Ex te tno l Do wer sjp pt vrsri ot
pljggeD into speaker coriectly.
Crieckine connecrion trpm The external power
supply tothespeoker
Plug the exlernpl power supply Into 0known
powerei) AC Outlet. Teal outlet with onothei
Pevice eolomp
Exteinol power supply la not
receiving AC power.
vohime control Is rtol luineo
ciockwite. turn me volume control clockwise until you teel it
click, the control win iiiuminoie blue
No power, blue LED
on the volume
control I s no t li t.
(Battery opeiotlon]
No battoiles instoiieo or Potteries
ore OrolneO. instoil six new ’AA' Potteries into tne bottoiy
cofTrportmenl locoteO on the external Pattory
pock. Moke sure the Potteries are Instcileo os
per the nlustrcrtion in the Pottery comportment.
Power isn't turrteO on. Turn me vrciume control ctockwise until you teel It
click, me control will rHummole PKie.
No Dowoilo the system. Power
oaoptor plug is not inseileO
conoclly.
No sound (tom the
speokei system
Ensure the power supply Is conhecleo to oknown
poweieo AC outlet onameothaiehp Isiecuieiy
plugged into the speokor lystom.
N o v o l u m e o r l o w v o l u m e . Turn me volume control clockwise.
incieose me volume lever on the audio
souicedevice.
I n p u t s o u r c e I s k i w .
IPod volume control
d o e s n o t I n c r e o s e
audio volume
IPod volume control only conirols
tne volume output on me
neodphorte socket
Use the speoker volume contiol for volume
corirol when iheiPord Is OdckeO in the
speoker unit.
Crackling sound
tiom tne speokois
Bod connection. Ensure thoi the iPod is sot securely in trie docking
st ati on. Che ck me con nec tior of t he 3.5m m
steieocoDle. It you ore using on external device
ensure thotthe 3.5mm cable Is securely pluggoo
Into me speaker and your exiernol device.
Ap roble m wr m you r au dio som ce Try connecting another device s uc h os a CO
Dkoyer or MP3 ployer to me 3.5mm coble
S o u n d I s d i s t o r t e d Volume level on speokei system
Is set loo high.
Turn me vofume control onticfockwiseto reduce
ttiovolume.
Sound source is dlstorteO WAV ono MID tiles ore often of poor auonty.
meretpre distortion and noise ore eoslly
noticed wim nigh, powered speokers Try oailleieni
o u d o s o u r c e s u c h o s o m u s i c C D .
S o u n d I s d i s t o r t e d
(when connected
to aPC Of loptODl
Volume level in the operoting
sy stem Is s otloo high.
Check the operoting system volumo level ono
decreoio It necessary.
T h e r e i s n o a u d i o
wnen using a
none In the dock
Nano IS not outputting oudm on
tne cocking conneotoi
the piobiem moybe wnn me nano itself, you simpty
nee d to pe il o im a r es et ly ouw on ' il o se a ny tu nes
that ore stoted onyournoho) To pettorm the reset
please toiiow me piocedure snown petow: ●
I. Switch tne IPod on.
3togglemoHoldswiichonandott.(Slideitto
Hoio, then lum rtott ogom ]
3Press or>d hold the Menu ond Select puttofts
until the Apple logo appeois. oPout 6to 10
s e c o n d s Yo u m o y n e o d t o i o p o o t m i s s t o p .
-8-

r
4
intempa
DIOITALI THE UMO TO MO U«C O S i tf C
TIMJCMMKS or C O M P \ n n t C
9 l > < f A T ( t * U M i A K & C O ^ A W
NMC5 AMb Reot^ri Af n O F i > a «
%SPbCr»« OWNERS THt$ PROOUCr IS NOT
S N O C R S S O s r A m £ c o u n j T f I N C
Inwnyo Ogrtsl. Crty V^wf, N«w B«iey Sc.
MsncMtf.Ma 6ER UKM:0161 828 5219
●mail: aupporidintaiT^odioHtlcom
viiww.ntsrnpodigctalcom
L