Thiel CS6 User manual

TT{IEL
CS6
& CS7.2
U
n
packi
ng
and
Repacki
ng
Instructions
ImportantjBecause
ofthespeaker's
sizeand
weight,
atleasttwo
peopleareneeded
to
unpack
and
repackthe
speaker.
All references
tothespeaker's
rightand
leftsidesare
made
from
theorien'l.ation
of
facing
therearofthespeaker.
The
rear
of
thespeaker
carton
hasthe
serial
number
and
finish
information
printed
onit.
UNPACKING
If your speakers'
ztsoodencrates
haaealreadybeen
remoaed,
proceed
to step 3.
'l Removespeakercrates
from shipping pallet andplacethem on their right sideswith the
r "TJp"artows
pointing up.
) Removescrews
frombothplywood end
capsandremove
wood corner
protectors
from the
a outsideof carton.
3 Standspeaker
(in carton)upright.Open thetop carton
flaps'
4 Removethepiyr,r'oedtop pack.
S Laythespeaker
(inthecarton)onitsback.Openthe
bottomcarton
flapsandfoid themout.
6 Fromthetop endof thespeaker:remove
thebluefoamfrom theright sideofthespeaker.
v Then
removettretwo
fronfcornerprotectors.
(Note:
thecorner
protectors
will bemarkeci
' uL' for left and"R" for right onthetop of each
protector.)
7 From thebottom endofthespeaker:
remove
thepiywood bottompack.Grip theplastic
' bugand pull thespeaker
from thebottom of thecarton,allowing thetop 12"of.the speaker
to remainontherearcorner
padsinsidethecarton.Then
grip thespeaker
wherethecorner
padends
andlift thespeaker,
pulling thecartonaway
atthetop.
B Standspeaker
upright andremoveplasticbagandwhite foam sheet
wrapping.
Repackinginstructionsonbackpage
6/98

REPACKING
lf it is necessary
to repack
thespeakers,
it must be
done
properly to au.oid
shipping damage,
We
recommend
faltetizing thetwo speaker
cartons
prior to shipping.If theor-igtnal
palletizing
materials
are
notooiiloblt, contact
your shipper
or theTHIELfactoryabout
palletizing.
1 Wrap thespeaker
top and
bottom(aroundthe
base)
with the
white foamsheet
wrappi4g.
Cover
speaker
with theprotective
plasticbag
2 Place
theemptycarton
onthefloorwith thefront side
up.Foidthecarton
endflaps
outward.
3 Laythetwo rearfoamstripped
corner
protectors
onthefloorin front oftheopen
carton
boitom with theendsoftheprotectors
laying
justinside
thecarton
bottom.(Note:the
ends
ofthecorners
are
marked"L" forleftand"R" forright.Makesure
these
ends
face
toward thetop of thecarton
andthattheleftprotector
will beunder thespeaker's
left side.)
4 Laythespeaker
down onitsbackandontop ofthecorner
protectors'
Makesure
thetop
ofthespeaker
isoriented
towardthetop ofthecarton.
5. t Slidethespeaker
andthe
rear
corner
protectors
intothe
bottomof thecarton.
6 ,, Place
theplywood bottompack
intothecarton
bottomagainst
the
base-of
thespeaker.
Be
: .:i surethe smitl foamblock ii toward thefront of thespeaker
to protectthe front of the
base.
7 Close
thebottom carton
flapsandtapesecurely'
8 Standthe speaker
in thecartonupright.
9 Remove
thetwo rearcorner
protectors
from thetop ofthecarton.
10, Install tine
frontright comerprotector
(marked
Ronitstopend)'
\1 ,;, Slide
both theright rearcornerandtheblue foaminto theright sideof the cartontogether.
I;
12,;: Install theleft rearandleft front cornerprotectors
into the carton(markedL on their top
ends).
IB Installplywood top pack,
makingsure
thepacKs
woodblocks
areinside
bothfront
corners.
1"4 Close
thetop flapsandtape
securely
1E Placethefour woodencorners
around
theoutside
of thecarton,
thenattach
thetop
ptywood endcap
with screws.
16 Laycarton
onitsright sideandattach
the
bottompiywood endcaptothewoodencorners
4Y with screws.
..
77 ,,, Placecartonsonshipping
palletwith theirright sides
down andsothespeakers
faceeach
' ,,
, other.
tr8, Bandthecartonsto thepallet.