Intermec SR61T User manual

The SR61T hands-free stand (P/N 203-877-xxx) provides you with a convenient way
to store the SR61T Tethered Scanner when you are not using it or to scan items
without having to hold your scanner. The hands-free stand ships with the hardware
necessary to install it.
To install and use the hands-free stand
1Attach the stand to the base with the screw that ships with the stand.
2Attach the hands-free stand to a surface with the two screws that ship with the
stand.
SR61T Hands-Free Stand Instructions

Worldwide Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel [phone]
fax [phone]
www.intermec.com
©2008 Intermec Technologies
Corporation. All rights reserved.
SR61T Hands-Free Stand Instructions
*943-194-001*
P/N 943-194-001
3Insert the SR61T into the hands-free stand.
4(Optional) Configure the Trigger Mode command to allow you to scan bar
codes without holding your SR61T. For help, see EasySet version 5.6.0.0 or later.
The latest version of EasySet is available at no charge from the Intermec web site
at www.intermec.com/EasySet.