IntesisHome IHWFILGE001R000 Assembly instructions

Installation Sheet
© Intesis Software SLU - All rights reserved
T
his information is subject to change without notice
Intesis
Home®is a registered trademark of
Intesis Software SLU
URL
Email
http://www.intesishome
.com
[e-mail]
1 / 4
Installation Sheet
IHWFILGE001R000
Intesis Software SLU
© 2019 Intesis Software SLU All rights reserved.
This document has been carefully written by Intesis Software SLU and a lot of effort has been made to
ensure no errors or mistakes are present in the document. Intesis Software SLU is not responsible for
printing or clerical errors.
Information in this document is subject to change without notice. No part of this publication may be
reproduced, stored in a retrieval system or transmitted in any form or any means electronic or
mechanical, including photocopying and recording for any purpose other than the purchaser’s personal
use without the written permission of Intesis Software SLU
Intesis Software SLU
Milà i Fontanals, 1 bis
08700 Igualada
Spain
IntesisHome® is a trademark of Intesis Software SLU. Third party product names or company names
used in this document may be trademarks of their respective companies. Its use in this document is
purely for information purposes only.

Installation Sheet
© Intesis Software SLU - All rights reserved
T
his information is subject to change without notice
Intesis
Home®is a registered trademark of
Intesis Software SLU
URL
Email
http://www.intesishome
.com
[e-mail]
2 / 4
Table of contents
1Safety instructions ....................................................................................................................................3
2Device information....................................................................................................................................3
3Device connection ....................................................................................................................................3
4Switch configuration .................................................................................................................................4

Installation Sheet
© Intesis Software SLU - All rights reserved
T
his information is subject to change without notice
Intesis
Home®is a registered trademark of
Intesis Software SLU
URL
Email
http://www.intesishome
.com
[e-mail]
3 / 4
1 Safety instructions
WARNING
Follow carefully this safety and installation instructions. Improper work may lead to serious harmful for your health and
may damage seriously the interface and/or the AC indoor unit.
• This interface must be installed by accredited technical personnel (electrician, installer or authorized technical
personnel) and following all the safety instructions.
• This interface must only be installed in a restricted access location.
• Before manipulating the AC indoor unit be sure it is completely disconnected from Mains power.
• In case of installation of the interface inside the AC indoor unit, fix the interface and communication cables preferably
to any appropriate point of the plastic cover of the unit taking care of no blocking free movement of mobile parts and
as far as possible from tubes containing liquids and power cables.
2 Device information
A. Lid
B. LED indicator
C. Push button
D. AC connector
E. DIP-Switch
3 Device connection
•Unplug the Air Conditioner (AC) unit from mains.
•Access to the main Printed Circuit Board.
•Locate the BYR socket connector.
•Select a location for the device.
•Connect the IntesisHome device to the Air Conditioner.
•Close the Air Conditioner unit.
•Plug the AC to the power supply line.
A
B
C
D
E
1. IntesisHome device
2. Wi-Fi Access Point or Router
3. BYR connector
4. Remote Controller (RC)
1
2
3
4

Installation Sheet
© Intesis Software SLU - All rights reserved
T
his information is subject to change without notice
Intesis
Home®is a registered trademark of
Intesis Software SLU
URL
Email
http://www.intesishome
.com
[e-mail]
4 / 4
4 Switch configuration
Please, make sure that switches are placed in the right position
as per your desired settings.
Switches
1 2 3 4
Description
0 X X X
Slave - A LG Controller must be present in BYR bus, configured as Master (Default value)
1 X X X
Master – LG Controller not needed in BYR bus. If it exists, it must be configured as Slave
X 0 X X
Error Type B – Machine must be Type B (Default value)
X 1 X X
Error Type A – Machine must be Type A
X X 0 X
Low Power Mode
X X 1 X
High Performance Mode (Default value)
X X X 0
WIFI power is limited
X X X 1
Max WIFI power (Default value)
Switch 3
This switch determines the performance of the device. Running in High Performance Mode means maximum consumption
and maximum device performance.
Switch 4
This switch determines the Wi-Fi range of the device. Maximum range is set by default. Consider that changing this switch
may affect to device Wi-Fi communication, happening a device in a running installation not to reach the current access
point or Wi-Fi network to which is connected.
In case no external supply is used: In very specific installations, AC port consumption may be overpassed, leading the
device to reboot. If that happened, decrease device consumption by using SW3 and SW4.
NOTE: Remember that you need to power cycle the climate system or the IntesisHome device for the changes in the
switches to be applied.

1 = UP
0 = DOWN
1 = UP
0 = DOWN