Invicta VD7 MULTIEYE Series User manual

<<OPERATION MANUAL -- VD7 MULTIEYE SERIES>>
<TIME INDICATION>
<TIME SETTING>
VD72, 73, 74,
75, 76, 79
VD77 & VD78
1. Pull out the crown to
 the second click when
 the small second hand
 is at the 12 o'clock
 position.
 It will stop on the spot 
 and advance the hour 
 and minute hands by
 turning the crown.

 Set the day by rotating
 the hour and minute
 hands clockwise.
 (Check that 24-hour
 hand is set correctly)
* Do not set the date between 10:00PM and 1:00AM
 Otherwise, the day may not change properly. If it is necessary to set the date during that time period, first
 change the time to any time outside it, set the date and then reset the correct time.
2. Push the crown back
 in to the normal
 position in signal.

 Pull out the crown to
 the first click.
3. Set the date by
 rotating the crown in
 counter-clockwise
 direction (Quick
 change function)
4. Push the crown back
 in to the normal
 position.
1. Pull out the crown to
 the first click when
 the small second 
 hand is at the 12
 o'clock position. The
 second hand will stop
 on the spot
2. Advance the hour and
 minute hands by turning
 the crown.
 (Check that 24 hour hand
 is set correctly)
3. Push the crown back in to
 the normal position in
 accordance with a time
 signal.
P. 1
ENGLISH
VD73
date
small-second
VD72
date
VD79
day date
VD78
small-second
VD77
24 hours
small-second
VD74
24 hours
day date
small-second
VD76
small-second
VD75
day date
small-second
day date

P. 2
ENGLISH
<<OPERATION MANUAL -- VD8 RETROGRADE SERIES>>
* Do not set the date between 10:00PM and 1:00AM
 Otherwise, the day may not change properly. If it is necessary to set the date during that time period, first
 change the time to any time outside it, set the date and then reset the correct time. 
* The retrograde day of the week can be set more quickly by following procedures:
 (1) Pull out the crown to 2 click position for Day adjustment
 (2) Turn the crown clockwise until the Day advance by one increment
 (3) Turn the crown counterclockwise until the center hands at or before 12:00 position
 (4) Turn the crown clockwise again until the Day advance by one increment
 (5) By repeatedly perform the Steps (3) & (4), the Day hand can be adjusted to the desired position more quickly
<TIME INDICATION>
<TIME SETTING>
1. Pull out the crown to
 the second click when
 the small second hand
 is at the 12 O'clock
 position.
 It will stop on the spot 
 and advance the hour
 and minute hands by
 turning the crown.
 Set the day by rotating
 the hour and minute
 hands clockwise.
 (Check that 24-hour
 hand is set correctly)
2. Push the crown back
 in to the normal
 position in signal.
 Pull out the crown to
 the first click
3. Set the date by
 rotating the crown in
 counter-clockwise
 direction (Quick
 change function)
4. Push the crown back
 in to the normal
 position.
VD84
24 hours
small-second
VD85
small-second
VD86
small-second
VD87
small-second
day
(Retrograde) datedate
day
(Retrograde) day (Retrograde) date
day
(Retrograde) date