IOne Lynx-R7 A User manual

Lynx-R7 2006/4/4
2.4GHz Wireless Optical Mouse
User Guide
Thank you for purchasing Lynx-R7 2.4GHz Wireless Optical Mouse. Please read
this user guide to help you using this product easily. If you have any questions,
please contact us at the website www.ione.com.tw, www.ione-usa.com or
www.itron-europe.com.
Introduction
Lynx-R7 is designed for long distance wireless operation of desktop personal
computer. Plug in Lynx-R7’s mini-receiver to your USB port and you can use this
wireless mouse without cable cluttering on your desk. The wireless operational
range can reach up to 10 meters in open space depending on the radio interference in
the environment.
Its two-way RF technology will automatically switch its 48 channels when it
encountered radio band interference with other surrounded 2.4GHz devices such as
Wi-Fi wireless LAN 802.11 a/b/g, Bluetooth, DECT digital telephone, etc. However,
two units of Lynx-R7 in one room may activate simultaneously due to radio frequency
band overlapping. They may switch the frequency at the same algorithms and band
overlapping remains exists. Please separate each other in a distance beyond 10
meters or in two different rooms.
Lynx-R7 is equipped with high performance CMOS process optical sensor and
performs high speed motion detection up to 37 inches per second and acceleration up
to 20 G. The embedded 800dpi optical resolution sensor can accurately estimate
motions over a wide range of surfaces.
Lynx-R7 will enter into sleep mode when the mouse is not moving in one second to
save the power consumption. It will further enter into power-down mode after 1
minute of sleep mode for minimum power consumption. It will wake up instantly
into normal mode when moving is detected.
For using in Win 98/ME/2000/XP/2003 server and Office 97/2000/XP/WinXp64 bits
USB environment Lynx-R7 does not require any driver. Just plug and play. You

can enjoy this convenient device.
Feature
．Fashion and modern design
．5-button optical mouse with scroll wheel
．Two-way 2.4GHz RF technology with 48 channels
．800 dpi optical resolution with motion detection up to 37 inches/sec and
acceleration up to 20G
．Wireless operational range can reach up to 10 meters in open space
．Low power consumption with smart power saving function
．Battery low indicator in front of scroll wheel
Package Contents:
1. 2.4GHz Wireless Optical Mouse
2. Dongle Receiver
3. 2 AA Batteries
4. User's Guide
Hardware Installation
Step1: Insert 2 AAbatteries into the battery compartment with correct polarity.
Step2: Please refer to the +, - diagram inside the battery compartment.
Step3: Turn on your computer and plug the dongle receiver into a USB port of your
computer.
Step4: Your computer will detect this USB device automatically.
Software Setup:
The mouse does NOT require a driver. However, we offer software to configure the
scroll wheel button and provide self-defined 9 shortcuts for various applications
and files. This Magic-Pop-Up function (Scroll Wheel Button software) can be
downloaded from our website www.ione.com.tw or www.itron-europe.com.

Key definition
1.LeftClick 
2.RightClick
3.ScrollWheelButton
4.PreviousWebPage
5. Next Web Page
6.BatteryLowIndicator
ID Setting
The product has been pre-set and the mouse and dongle receiver are already paired.
It is not necessary to do the ID setting when you use the mouse for the first time.
However, the connection may be lost due to RF interference of environment. Hence,
it may be necessary to re-set the connection ID. Please follow the process below for
the ID setting.
Step 1: Plug the dongle receiver into your computer. For the best performance, please
plug the dongle receiver into the front USB port of your computer, or use the
USB extension cable to place the dongle receiver 20cm away from monitor,

speaker, power supply, USB hub and other RF interference sources.
Step 2: Press the connect button on the dongle receiver. The LED will start to blink.
Step 3: Press the connect button on the bottom of the Wireless Mouse within 8
seconds after Step 2.
Step 4: The LED on the dongle receiver will blink faster for few seconds. This means
that ID setting is completed.
Note: 1. If the Wireless Mouse does not work properly, please go back to step 2.
2. If the ID is used by other users or devices, please go back to step 2.
Reminder: For optimal performance, please place the dongle receiver 20cm away
from other RF interference devices such as computer monitors and speakers.
Now, Enjoy and Have a Fun!!!
TROUBLE SHOOTING GUIDE
Symptom Possible Reason Remedy
The LED of dongle receiver
does not light or blink when
the dongle receiver is
plugged into USB port of
the computer
The computer is off or
the USB port is without
power supply
Turn on your computer or
plug into a USB port with
power supply
The LED of dongle receiver
does not light or blink when
the mouse is moving.
The ID is lost or the
distance is beyond RF
transmitting range
Follow the above ID
setting procedure, or move
the mouse closer to the
dongle receiver until the
LED blinks, when you
move the mouse.
The mouse cursor on the
screen does not move
smoothly
Radio frequency is
interfered or the distance
is beyond RF
transmitting range
Move the mouse closer to
the dongle receiver until
the mouse cursor move
smoothly.
The red LED of battery low
indicator in front of scroll
wheel is lit.
Battery power is low Change new batteries.
The mouse cursor is moving
without moving the mouse
Frequency overlapping
by other 2.4GHz mouse
devices in the
neighborhood
Follow the above ID
setting procedure to change
ID or move each other
apart up to the distance the

overlapping is disappeared.
Further questions. Please send an email to
[email protected] or
[email protected]
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to
operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
The antenna(s) used for this transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with minimum distance 2.5cm between the radiator & your
body.