IOT-Smart Solutions BWC-I5 User manual

User Manual for BWC-I5

Structural Diagram
1. Charge indicator
2. IR Sensor
3. Microphone
4. IR light
5. Battery cover
6. Menu button
7. Playback button
8. Status indicator
9. Laser light
10. Lighting light
11. Camera
12. Audio REC button
13. ON/OFF button
14. Battery lock
15. Video REC button
16. USB port
17. External camera port
18. Clip locker
19. Snapshot button
20. Line hole
21. Speaker
22. PTT button
23. LCD Screen
24. Pogo-pin Data interface
Remark: External equipment should be selected according to models and functions of the device.

Functions and Operations
1. Turning On the Camera
In power off status, long press for 3 seconds, the camera will be turn on and enter into
preview mode automatically. Meanwhile, the status indicator will turn green. In preview mode,
the following screen will appear:
2. Turning Off the Camera
In preview mode, long press for 3 seconds, after two beeps, the camera will save the
current status and power off. Meanwhile, the status indicator will turn off.
3. Snapshot
In preview mode, press to take a photo; long press to take more photos
continuously, the quantity of photo can be configure in the menu. There is a crack sound when
a photo was taken, and the photo will be saved in JPG format automatically.
4. One Touch Snapshot
In power off status, long press to turn on the camera and a photo will be taken. The
status indicator will turn red and flash. The photo will be saved in JPG format automatically.
5. Recording Video
Resolution Free space
Battery status
Recording time
System date/ time
Recording
Snapshot

In preview mode, short press to start recording. Meanwhile, the status indicator will
turn red and flash, and the recording icon will turn to yellow. Short press again to stop
recording, and the video will be saved in MP4 format automatically.
Remark: During video recording, long press “Audio REC” button to mark the video as important video,
press again to cancel it. And press “Snapshot” button to zoom in and zoom out.
6. One Touch Video Recording
In power off status, long press to turn on the camera and it will start recording.
Meanwhile, the status indicator will turn red and flash, recording icon will turn to yellow.
Press again to stop recording, and the video will be saved in MP4 format
automatically.
7. Audio Recording
In preview mode, press to start audio recording. Meanwhile, the status indicator will
turn to yellow and flash. Press again, the camera will stop audio recording, and the
audio will be saved in WAV format automatically.
8. One Touch Audio Recording
In powered off status, long press , the camera will be turn on and start audio recording.
Meanwhile, the status indicator will turn yellow and flash. Press again, the camera will
stop audio recording, and the audio will be saved in WAV format automatically.
9. IR Mode
In preview mode or during recording a video, long press to switch to IR mode. Long
press again to exit from IR mode.
10. Supplementary Lighting
In power on status, short press to turn on the supplementary lighting, and short press
again to turn it off.
11. Laser Light

Manual mode: in preview mode or during recording a video, short press “PTT” button to turn
on the laser light; short press “PTT” button again to turn it off.
Auto mode: During video recording status; it will turn on laser light to position automatically.
12. Playback
In the preview mode, press to enter into the playback interface. The move left icon is
and the move right is , press to confirm your selection, press to
exit, as the figure shown:
Left→ video Right→ photo OK→ playback Exit→ menu
13. GPS
The device is equipped with built-in GPS module, it will locate your position and the position
information will be saving as a special file. When the GPS is ON, you can see the GPS icon in
the live view mode, green means GPS signal is normal, and you will see the latitude and
longitude info.
14. Turning Off the Screen
In preview mode or during video recording, short press to turn off LCD screen,
meanwhile, this camera will go to sleep mode. Press any button to wake LCD screen and the
camera will exit from sleep mode.
15. Menu configuration
In preview mode, press to turn off screen display to enter menu interface, press
/ to select the option menu, and then press to confirm the operation, and then
press / to select corresponding icon, and then press to active the option.
16. Reset
In case the camera crashed and it can’t be power on or power off, press this button to reset it,
and then try again.
Remark: This operation will not cause loss or damage of any data, and modify the parameters either.

17. Charging the Battery
This camera has a chargeable battery built in. In case of low battery, please connect this
camera to power supply for battery charging.
1. Charge the camera
Connect this camera and adapter via USB cable, and connect adapter to power supply to
charge the battery. In charging status, the status indicator will turn red. Once the battery is
fully charged, the status indicator will turn green.
2. Charge the battery
Connect the battery charger to the power supply to charge the battery. In charging status, the
status indicator will turn red. Once the battery is fully charged, the status indicator will turn
green.
Remark: When you recharge the body camera, please make sure it is OFF. Also, even you don’t use the
camera for a long time; please recharge it every 3 months.

18. Replace the built-in battery
Step1: Drag the battery lock from the left side to the right side, and then the cover will be unlock.
And keep the lock on the right side, and then go to step 2.
Step2: Follow the direction to pull the battery cover.